1552081 Phoenix Contact Electrical Wires & Cables

Ambient temperature (operation)-

Standards/regulations-

Status display-

Degree of pollution-

Material, knurls-

Conductor cross section-

Overall twist-

Core diameter including insulation-

Number of bending cycles-

Cable weight-

Test voltage, cable-

Resistance to oil-

ECLASS 4.0-

ETIM 3.0-

ETIM 7.0-

UNSPSC 11-

Insulation resistance-

Torque-

Contact surface material-

Note-

Cable type (abbreviation)-

Conductor structure signal line-

External cable diameter D-

Smallest bending radius, movable installation-

Acceleration-

Conductor resistance-

Flame resistance-

China RoHS-

ECLASS 5.0-

ETIM 4.0-

ECLASS 9.0-

UNSPSC 20.0-

Length of cable-

Number of positions-

Protective circuit/component-

Contact carrier material-

Cable type-

UL AWM style-

Thickness, insulation-

Optical shield covering-

Smallest bending radius, fixed installation-

Bending radius-

Outer sheath, material-

Nominal voltage, cable-

REACh SVHC-

ECLASS 4.1-

ECLASS 6.0-

UNSPSC 7.0901-

UNSPSC 21.0-

Rated current at 40°C-

Coding-

Overvoltage category-

Flammability rating according to UL 94-

Contact material-

Standards/specifications-

Wire colors-

Shielding-

Traversing rate-

Material conductor insulation-

Other resistance-

ECLASS 10.0.1-

ECLASS 11.0-

ETIM 6.0-

UNSPSC 19.0-

UNSPSC 12.01-

Degree of protection-

Rated voltage-

Insertion/withdrawal cycles-

Material of grip body-

Sealing material-

Cable abbreviation-

AWG signal line-

External sheath, color-

Traversing path-

Conductor material-

Special properties-

Halogen-free-

ECLASS 7.0-

ECLASS 5.1-

UNSPSC 13.2-

UNSPSC 6.01-

Height-

Ambient temperature (start-up type tested)-

Degree of pollution-

Discharge current to PE-

Mains buffering time-

Protective circuit/component-

Connection in parallel-

Output power-

MTBF (IEC 61709, SN 29500)-

Insulation voltage output / PE-

Conductor cross section solid min.-

Conductor cross section AWG max.-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

UL approvals-

Contact discharge-

Test field strength-

Input-

Criterion B-

ECLASS 11.0-

ECLASS 4.0-

Depth-

Degree of protection-

Max. permissible relative humidity (operation)-

Input voltage range-

AC frequency range-

REACh SVHC-

Recommended breaker for input protection-

POWER BOOST (IBoost)-

Connection in series-

Active current limitation-

Typical response time-

Housing material-

Assembly instructions-

Connection method-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic HF field-

Signal-

Criterion A-

ECLASS 4.1-

ETIM 4.0-

UNSPSC 12.01-

Width with alternative assembly-

Ambient temperature (operation)-

Installation height-

Nominal power consumption-

Nominal output current (IN)-

Selective Fuse Breaking (ISFB)-

Protection against overvoltage at the output (OVP)-

Net weight-

Insulation voltage input / PE-

Mounting position-

Conductor cross section flexible min.-

Stripping length-

EMC requirements for noise emission-

Standard – Safety extra-low voltage-

Standard - Approval for medical use-

CSA-

Electrostatic discharge-

Low Voltage Directive-

Fast transients (burst)-

Output-

Voltage-

China RoHS-

ECLASS 5.0-

ETIM 3.0-

ETIM 6.0-

UNSPSC 6.01-

UNSPSC 20.0-

Width-

Height with alternative assembly-

Climatic class-

Current consumption-

Type of protection-

Setting range of the output voltage (USet)-

Feedback voltage resistance-

Residual ripple-

Power loss nominal load max.-

Insulation voltage input/output-

Protection class-

Conductor cross section AWG min.-

EMC requirements for noise immunity-

Standard - Electrical safety-

Standard - Equipment safety-

Standard - Safe isolation-

Electromagnetic compatibility-

Frequency range-

Surge voltage load (surge)-

Conducted interference-

ECLASS 6.0-

ETIM 7.0-

UNSPSC 21.0-

Depth with alternative assembly-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range DC-

Inrush current-

Nominal output voltage-

Derating-

Control deviation-

Maximum power dissipation in no-load condition-

Efficiency-

Conductor cross section solid max.-

Conductor cross section flexible max.-

Screw thread-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Rail applications-

Discharge in air-

Comments-

I/O/S-

ECLASS 10.0.1-

ECLASS 5.1-

ECLASS 9.0-

UNSPSC 11-

UNSPSC 18.0-

ECLASS 7.0-

UNSPSC 7.0901-

UNSPSC 13.2-

UNSPSC 19.0-

Height90 mm

Degree of protectionIP20

Ambient temperature (operation)-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)

Nominal power consumption206.3 VA

Mains buffering time> 20 ms (120 V AC)

Protective circuit/componentVaristor

Feedback voltage resistance< 25 V DC

Output power100 W

Depth84 mm

Inflammability class in acc. with UL 94 (housing / terminal blocks)V0

Climatic class3K3 (in acc. with EN 60721)

Input voltage range85 V AC ... 264 V AC

Inrush current< 30 A (typical)

Type of protectionTransient surge protection

Width55 mm

Installation distance top/bottom30 mm / 30 mm

Ambient temperature (storage/transport)-40 °C ... 85 °C

Nominal input voltage range100 V AC ... 240 V AC

Frequency range (fN)50 Hz ... 60 Hz 10 %

Input fuse4 A (slow-blow, internal)

Power factor (cos phi)0.54

Connection in parallelYes, for redundancy and increased capacity

Residual ripple< 75 mVPP (with nominal values)

Control deviation< 1 % (change in load, static 10 % ... 90 %)

Efficiencytyp. 89 % (120 V AC)

Standard – Safety extra-low voltageIEC 62368-1 (SELV) und EN 60204-1 (PELV)

Discharge in air8 kV (Test Level 3)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dipsEN 61000-4-11

ECLASS 10.0.127040701

ETIM 6.0EC002540

UNSPSC 1139121004

UNSPSC 19.039121004

Installation distance right/left0 mm / 0 mm

Degree of pollution2

Current consumption2.19 A (100 V AC)

Recommended breaker for input protection6 A ... 16 A (Characteristics B, C, D, K)

Nominal output current (IN)6.67 A (-25 °C ... 55 °C)

Nominal output voltage15 V DC ±1 %

Connection in seriesyes

Net weight0.34 kg

Protection classII (in closed control cabinet)

Assembly instructionsalignable: 0 mm horizontally, 30 mm vertically

Conductor cross section AWG min.24

Screw threadM3

Standard - Safety of transformersEN 61558-2-16

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU

Contact discharge6 kV (Test Level 3)

Input2 kV (Test Level 3 - symmetrical)

Criterion ANormal operating behavior within the specified limits.

ECLASS 4.027040700

ECLASS 5.127049000

ETIM 3.0EC001039

UNSPSC 12.0139121004

UNSPSC 21.039121004

MTBF (IEC 61709, SN 29500)> 727000 h (40 °C)

Foot latch materialPOM (Polyoxymethylen)

Mounting positionhorizontal DIN rail NS 35, EN 60715

Conductor cross section flexible max.2.5 mm²

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 2 - symmetrical)

China RoHSEnvironmentally Friendly Use Period = 25;

ECLASS 6.027049000

ECLASS 7.027049002

UNSPSC 7.090139121004

UNSPSC 18.039121004

ECLASS 5.027049000

ECLASS 9.027040701

ETIM 7.0EC002540

UNSPSC 20.039121004

Derating55 °C ... 70 °C (2.5%/K)

Typical response time< 1 s

Housing materialPolycarbonate

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationDIN VDE 0100-410

Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

ECLASS 4.127040700

ETIM 4.0EC000599

Power loss nominal load max.< 12 W

Conductor cross section solid min.0.2 mm²

Stripping length8 mm

Low Voltage DirectiveConformance with Low Voltage Directive 2014/35/EC

Test field strength10 V/m

Voltage10 V (Test Level 3)

Conducted interferenceEN 61000-4-6

UNSPSC 6.0130211502

Insulation voltage input/output4 kV AC (type test)

Connection methodScrew connection

Conductor cross section flexible min.0.2 mm²

Standard - Electrical safetyIEC 62368-1/VDE 0805 (SELV)

Frequency range10 kHz ... 80 MHz

Protection against overvoltage at the output (OVP)≤ 25 V DC

Maximum power dissipation in no-load condition< 0.4 W

Conductor cross section solid max.2.5 mm²

Conductor cross section AWG max.14

Mains variation/undervoltageEN 61000-4-11

UL approvalsUL/C-UL listed UL 508

Electrostatic dischargeEN 61000-4-2

ECLASS 11.027040701

UNSPSC 13.239121004

Ambient temperature (operation)-40 °C ... 80 °C (cable, fixed installation)

Standards/regulationsM8 connector IEC 61076-2-104

Status displayNo

Degree of pollution3

Material, knurlsZinc die-cast, nickel-plated

Conductor cross section3x 0.25 mm² (Signal line)

Overall twist3 wires, twisted

Core diameter including insulation1.17 mm ±0.02 mm (Signal line)

Number of bending cycles10000000

Cable weight26 kg/km

Test voltage, cable3000 V

Resistance to oilin accordance with DIN EN 60811-2-1

ECLASS 4.027060300

ETIM 3.0EC001855

ETIM 7.0EC001855

UNSPSC 1131251501

Insulation resistance≥ 100 GΩ*km

Torque0.2 Nm (M8 connectors)

Contact surface materialNi/Au

NoteThis item is a sensor/actuator cable with a freely selectable cable type. The technical data for all possible cable types is listed in the table below.

Cable type (abbreviation)PUR

Conductor structure signal line32x 0.10 mm

External cable diameter D4.35 mm ±0.2 mm

Smallest bending radius, movable installation44 mm

Acceleration10 m/s²

Conductor resistancemax. 79 Ω/km

Flame resistancein accordance with UL 758/1581 FT2

China RoHSEnvironmentally Friendly Use Period = 50 years

ECLASS 5.027061800

ETIM 4.0EC001855

ECLASS 9.027060311

UNSPSC 20.031251501

Length of cableFree input (0.2 ... 40.0 m)

Number of positions3

Protective circuit/componentunwired

Contact carrier materialTPU GF

Cable typePUR halogen-free black

UL AWM style20549

Thickness, insulation≥ 0.21 mm (Core insulation)

Optical shield covering80 %

Smallest bending radius, fixed installation22 mm

Bending radius50 mm

Outer sheath, materialPUR

Nominal voltage, cable300 V

REACh SVHCLead 7439-92-1

ECLASS 4.127060300

ECLASS 6.027279200

UNSPSC 7.090131251501

UNSPSC 21.031251501

Rated current at 40°C4 A

CodingA - standard

Overvoltage categoryII

Flammability rating according to UL 94HB

Contact materialCuSn

Standards/specificationsM8 connector IEC 61076-2-104

Wire colorsbrown, blue, black

ShieldingBraided copper wires

Traversing rate3 m/s

Material conductor insulationPP

Other resistanceHighly resistant to acids, alkaline solutions and solvents

ECLASS 10.0.127060311

ECLASS 11.027060311

ETIM 6.0EC001855

UNSPSC 19.031251501

UNSPSC 12.0131251501

Degree of protectionIP65

Rated voltage48 V AC

Insertion/withdrawal cycles≥ 100

Material of grip bodyTPU, hardly inflammable, self-extinguishing

Sealing materialNBR

Cable abbreviationLi9Y-V1-C-V1-11Y

AWG signal line24

External sheath, colorblack-gray RAL 7021

Traversing path10 m

Conductor materialBare Cu litz wires

Special propertiesFlexible cable conduit capable

Halogen-freein accordance with DIN VDE 0472 part 815

ECLASS 7.027279218

ECLASS 5.127061800

UNSPSC 13.231251501

UNSPSC 6.0131251501

Height-

Ambient temperature (start-up type tested)-

Degree of pollution-

Discharge current to PE-

Mains buffering time-

Protective circuit/component-

Connection in parallel-

Output power-

MTBF (IEC 61709, SN 29500)-

Insulation voltage output / PE-

Conductor cross section solid min.-

Conductor cross section AWG max.-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

UL approvals-

Contact discharge-

Test field strength-

Input-

Criterion B-

ECLASS 11.0-

ECLASS 4.0-

Depth-

Degree of protection-

Max. permissible relative humidity (operation)-

Input voltage range-

AC frequency range-

REACh SVHC-

Recommended breaker for input protection-

POWER BOOST (IBoost)-

Connection in series-

Active current limitation-

Typical response time-

Housing material-

Assembly instructions-

Connection method-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic HF field-

Signal-

Criterion A-

ECLASS 4.1-

ETIM 4.0-

UNSPSC 12.01-

Width with alternative assembly-

Ambient temperature (operation)-

Installation height-

Nominal power consumption-

Nominal output current (IN)-

Selective Fuse Breaking (ISFB)-

Protection against overvoltage at the output (OVP)-

Net weight-

Insulation voltage input / PE-

Mounting position-

Conductor cross section flexible min.-

Stripping length-

EMC requirements for noise emission-

Standard – Safety extra-low voltage-

Standard - Approval for medical use-

CSA-

Electrostatic discharge-

Low Voltage Directive-

Fast transients (burst)-

Output-

Voltage-

China RoHS-

ECLASS 5.0-

ETIM 3.0-

ETIM 6.0-

UNSPSC 6.01-

UNSPSC 20.0-

Width-

Height with alternative assembly-

Climatic class-

Current consumption-

Type of protection-

Setting range of the output voltage (USet)-

Feedback voltage resistance-

Residual ripple-

Power loss nominal load max.-

Insulation voltage input/output-

Protection class-

Conductor cross section AWG min.-

EMC requirements for noise immunity-

Standard - Electrical safety-

Standard - Equipment safety-

Standard - Safe isolation-

Electromagnetic compatibility-

Frequency range-

Surge voltage load (surge)-

Conducted interference-

ECLASS 6.0-

ETIM 7.0-

UNSPSC 21.0-

Depth with alternative assembly-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range DC-

Inrush current-

Nominal output voltage-

Derating-

Control deviation-

Maximum power dissipation in no-load condition-

Efficiency-

Conductor cross section solid max.-

Conductor cross section flexible max.-

Screw thread-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Rail applications-

Discharge in air-

Comments-

I/O/S-

ECLASS 10.0.1-

ECLASS 5.1-

ECLASS 9.0-

UNSPSC 11-

UNSPSC 18.0-

ECLASS 7.0-

UNSPSC 7.0901-

UNSPSC 13.2-

UNSPSC 19.0-

Height-

Degree of protection-

Ambient temperature (operation)-

Max. permissible relative humidity (operation)-

Nominal power consumption-

Mains buffering time-

Protective circuit/component-

Feedback voltage resistance-

Output power-

Depth-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class-

Input voltage range-

Inrush current-

Type of protection-

Width-

Installation distance top/bottom-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallel-

Residual ripple-

Control deviation-

Efficiency-

Standard – Safety extra-low voltage-

Discharge in air-

Comments-

Surge voltage load (surge)-

Voltage dips-

ECLASS 10.0.1-

ETIM 6.0-

UNSPSC 11-

UNSPSC 19.0-

Installation distance right/left-

Degree of pollution-

Current consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Nominal output voltage-

Connection in series-

Net weight-

Protection class-

Assembly instructions-

Conductor cross section AWG min.-

Screw thread-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic compatibility-

Contact discharge-

Input-

Criterion A-

ECLASS 4.0-

ECLASS 5.1-

ETIM 3.0-

UNSPSC 12.01-

UNSPSC 21.0-

MTBF (IEC 61709, SN 29500)-

Foot latch material-

Mounting position-

Conductor cross section flexible max.-

EMC requirements for noise immunity-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSA-

Fast transients (burst)-

Electromagnetic HF field-

Output-

China RoHS-

ECLASS 6.0-

ECLASS 7.0-

UNSPSC 7.0901-

UNSPSC 18.0-

ECLASS 5.0-

ECLASS 9.0-

ETIM 7.0-

UNSPSC 20.0-

Derating-

Typical response time-

Housing material-

EMC requirements for noise emission-

Standard - Safe isolation-

Criterion B-

ECLASS 4.1-

ETIM 4.0-

Power loss nominal load max.-

Conductor cross section solid min.-

Stripping length-

Low Voltage Directive-

Test field strength-

Voltage-

Conducted interference-

UNSPSC 6.01-

Insulation voltage input/output-

Connection method-

Conductor cross section flexible min.-

Standard - Electrical safety-

Frequency range-

Protection against overvoltage at the output (OVP)-

Maximum power dissipation in no-load condition-

Conductor cross section solid max.-

Conductor cross section AWG max.-

Mains variation/undervoltage-

UL approvals-

Electrostatic discharge-

ECLASS 11.0-

UNSPSC 13.2-

Ambient temperature (operation)-

Standards/regulations-

Status display-

Degree of pollution-

Material, knurls-

Conductor cross section-

Overall twist-

Core diameter including insulation-

Number of bending cycles-

Cable weight-

Test voltage, cable-

Resistance to oil-

ECLASS 4.0-

ETIM 3.0-

ETIM 7.0-

UNSPSC 11-

Insulation resistance-

Torque-

Contact surface material-

Note-

Cable type (abbreviation)-

Conductor structure signal line-

External cable diameter D-

Smallest bending radius, movable installation-

Acceleration-

Conductor resistance-

Flame resistance-

China RoHS-

ECLASS 5.0-

ETIM 4.0-

ECLASS 9.0-

UNSPSC 20.0-

Length of cable-

Number of positions-

Protective circuit/component-

Contact carrier material-

Cable type-

UL AWM style-

Thickness, insulation-

Optical shield covering-

Smallest bending radius, fixed installation-

Bending radius-

Outer sheath, material-

Nominal voltage, cable-

REACh SVHC-

ECLASS 4.1-

ECLASS 6.0-

UNSPSC 7.0901-

UNSPSC 21.0-

Rated current at 40°C-

Coding-

Overvoltage category-

Flammability rating according to UL 94-

Contact material-

Standards/specifications-

Wire colors-

Shielding-

Traversing rate-

Material conductor insulation-

Other resistance-

ECLASS 10.0.1-

ECLASS 11.0-

ETIM 6.0-

UNSPSC 19.0-

UNSPSC 12.01-

Degree of protection-

Rated voltage-

Insertion/withdrawal cycles-

Material of grip body-

Sealing material-

Cable abbreviation-

AWG signal line-

External sheath, color-

Traversing path-

Conductor material-

Special properties-

Halogen-free-

ECLASS 7.0-

ECLASS 5.1-

UNSPSC 13.2-

UNSPSC 6.01-

Height130 mm

Ambient temperature (start-up type tested)-40 °C

Degree of pollution2

Discharge current to PE< 3.5 mA

Mains buffering timetyp. 25 ms (400 V AC)

Protective circuit/componentVaristor

Connection in parallelYes, for redundancy and increased capacity

Output power960 W

MTBF (IEC 61709, SN 29500)> 890000 h (25 °C)

Insulation voltage output / PE500 V DC (routine test)

Conductor cross section solid min.0.2 mm²

Conductor cross section AWG max.10

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

UL approvalsUL Listed UL 508

Contact discharge8 kV (Test Level 4)

Test field strength10 V/m (Test Level 3)

Input2 kV (Test Level 3 - symmetrical)

Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

ECLASS 11.027040701

ECLASS 4.027040700

Depth179 mm

Degree of protectionIP20

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)

Input voltage range3x 320 V AC ... 575 V AC

AC frequency range45 Hz ... 65 Hz

REACh SVHCLead 7439-92-1

Recommended breaker for input protection6 A ... 16 A (AC: Characteristics B, C, D, K)

POWER BOOST (IBoost)22.5 A (-25 °C ... 40 °C permanent, UOUT = 48 V DC )

Connection in seriesyes

Active current limitationApprox. IBOOST = 22.5 A (for short-circuit)

Typical response time< 1 s

Housing materialSteel sheet, zinc-plated

Assembly instructionsalignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom

Connection methodScrew connection

Standard - Safety of transformersIEC 61558-2-17

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic HF fieldEN 61000-4-3

Signal1 kV (Test Level 2 - asymmetrical)

Criterion ANormal operating behavior within the specified limits.

ECLASS 4.127040700

ETIM 4.0EC002540

UNSPSC 12.0139121004

Width with alternative assembly176 mm

Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)

Installation height4000 m

Nominal power consumption1386 VA

Nominal output current (IN)20 A (-25 °C ... 60 °C, UOUT = 48 V DC)

Selective Fuse Breaking (ISFB)100 A (12 ms)

Protection against overvoltage at the output (OVP)< 60 V DC

Net weight2.5 kg

Insulation voltage input / PE3.5 kV AC (type test)

Mounting positionhorizontal DIN rail NS 35, EN 60715

Conductor cross section flexible min.0.2 mm²

Stripping length10 mm

EMC requirements for noise emissionEN 61000-6-3

Standard – Safety extra-low voltageIEC 60950-1 (SELV) and EN 60204-1 (PELV)

Standard - Approval for medical useIEC 60601-1, 2 x MOOP

CSACAN/CSA-C22.2 No. 60950-1-07

Electrostatic dischargeEN 61000-4-2

Low Voltage DirectiveConformance with Low Voltage Directive 2014/35/EC

Fast transients (burst)EN 61000-4-4

Output1 kV (Test Level 2 - symmetrical)

Voltage10 V (Test Level 3)

China RoHSEnvironmentally Friendly Use Period = 25;

ECLASS 5.027242200

ETIM 3.0EC001039

ETIM 6.0EC002540

UNSPSC 6.0130211502

UNSPSC 20.039121004

Width96 mm

Height with alternative assembly130 mm

Climatic class3K3 (in acc. with EN 60721)

Current consumption3x 2.1 A (400 V AC)

Type of protectionTransient surge protection

Setting range of the output voltage (USet)30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted)

Feedback voltage resistancemax. 60 V DC

Residual ripple< 50 mVPP (with nominal values)

Power loss nominal load max.70 W

Insulation voltage input/output4 kV AC (type test)

Protection classI

Conductor cross section AWG min.18

EMC requirements for noise immunityEN 61000-6-1

Standard - Electrical safetyIEC 60950-1/VDE 0805 (SELV)

Standard - Equipment safetyBG (design tested)

Standard - Safe isolationDIN VDE 0100-410

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU

Frequency range0.15 MHz ... 80 MHz

Surge voltage load (surge)EN 61000-4-5

Conducted interferenceEN 61000-4-6

ECLASS 6.027049000

ETIM 7.0EC002540

UNSPSC 21.039121004

Depth with alternative assembly99 mm

Ambient temperature (storage/transport)-40 °C ... 85 °C

Nominal input voltage range3x 400 V AC ... 500 V AC

Frequency range DC0 Hz

Inrush current< 20 A (typical)

Nominal output voltage48 V DC ±1 %

Derating60 °C ... 70 °C (2.5%/K)

Control deviation< 1 % (change in load, static 10 % ... 90 %)

Maximum power dissipation in no-load condition24 W

Efficiency> 93 % (at 400 V AC and nominal values)

Conductor cross section solid max.6 mm²

Conductor cross section flexible max.4 mm²

Screw threadM3

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipmentEN 50178

Rail applicationsEN 50121-4

Discharge in air15 kV (Test Level 4)

CommentsCriterion A

I/O/Sasymmetrical

ECLASS 10.0.127040701

ECLASS 5.127242200

ECLASS 9.027040701

UNSPSC 1139121004

UNSPSC 18.039121004

ECLASS 7.027049002

UNSPSC 7.090139121004

UNSPSC 13.239121004

UNSPSC 19.039121004

Height-

Degree of protection-

Ambient temperature (operation)-

Max. permissible relative humidity (operation)-

Nominal power consumption-

Mains buffering time-

Protective circuit/component-

Feedback voltage resistance-

Output power-

Depth-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class-

Input voltage range-

Inrush current-

Type of protection-

Width-

Installation distance top/bottom-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallel-

Residual ripple-

Control deviation-

Efficiency-

Standard – Safety extra-low voltage-

Discharge in air-

Comments-

Surge voltage load (surge)-

Voltage dips-

ECLASS 10.0.1-

ETIM 6.0-

UNSPSC 11-

UNSPSC 19.0-

Installation distance right/left-

Degree of pollution-

Current consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Nominal output voltage-

Connection in series-

Net weight-

Protection class-

Assembly instructions-

Conductor cross section AWG min.-

Screw thread-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic compatibility-

Contact discharge-

Input-

Criterion A-

ECLASS 4.0-

ECLASS 5.1-

ETIM 3.0-

UNSPSC 12.01-

UNSPSC 21.0-

MTBF (IEC 61709, SN 29500)-

Foot latch material-

Mounting position-

Conductor cross section flexible max.-

EMC requirements for noise immunity-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSA-

Fast transients (burst)-

Electromagnetic HF field-

Output-

China RoHS-

ECLASS 6.0-

ECLASS 7.0-

UNSPSC 7.0901-

UNSPSC 18.0-

ECLASS 5.0-

ECLASS 9.0-

ETIM 7.0-

UNSPSC 20.0-

Derating-

Typical response time-

Housing material-

EMC requirements for noise emission-

Standard - Safe isolation-

Criterion B-

ECLASS 4.1-

ETIM 4.0-

Power loss nominal load max.-

Conductor cross section solid min.-

Stripping length-

Low Voltage Directive-

Test field strength-

Voltage-

Conducted interference-

UNSPSC 6.01-

Insulation voltage input/output-

Connection method-

Conductor cross section flexible min.-

Standard - Electrical safety-

Frequency range-

Protection against overvoltage at the output (OVP)-

Maximum power dissipation in no-load condition-

Conductor cross section solid max.-

Conductor cross section AWG max.-

Mains variation/undervoltage-

UL approvals-

Electrostatic discharge-

ECLASS 11.0-

UNSPSC 13.2-

Ambient temperature (operation)-

Standards/regulations-

Status display-

Degree of pollution-

Material, knurls-

Conductor cross section-

Overall twist-

Core diameter including insulation-

Number of bending cycles-

Cable weight-

Test voltage, cable-

Resistance to oil-

ECLASS 4.0-

ETIM 3.0-

ETIM 7.0-

UNSPSC 11-

Insulation resistance-

Torque-

Contact surface material-

Note-

Cable type (abbreviation)-

Conductor structure signal line-

External cable diameter D-

Smallest bending radius, movable installation-

Acceleration-

Conductor resistance-

Flame resistance-

China RoHS-

ECLASS 5.0-

ETIM 4.0-

ECLASS 9.0-

UNSPSC 20.0-

Length of cable-

Number of positions-

Protective circuit/component-

Contact carrier material-

Cable type-

UL AWM style-

Thickness, insulation-

Optical shield covering-

Smallest bending radius, fixed installation-

Bending radius-

Outer sheath, material-

Nominal voltage, cable-

REACh SVHC-

ECLASS 4.1-

ECLASS 6.0-

UNSPSC 7.0901-

UNSPSC 21.0-

Rated current at 40°C-

Coding-

Overvoltage category-

Flammability rating according to UL 94-

Contact material-

Standards/specifications-

Wire colors-

Shielding-

Traversing rate-

Material conductor insulation-

Other resistance-

ECLASS 10.0.1-

ECLASS 11.0-

ETIM 6.0-

UNSPSC 19.0-

UNSPSC 12.01-

Degree of protection-

Rated voltage-

Insertion/withdrawal cycles-

Material of grip body-

Sealing material-

Cable abbreviation-

AWG signal line-

External sheath, color-

Traversing path-

Conductor material-

Special properties-

Halogen-free-

ECLASS 7.0-

ECLASS 5.1-

UNSPSC 13.2-

UNSPSC 6.01-

Height-

Ambient temperature (start-up type tested)-

Degree of pollution-

Discharge current to PE-

Mains buffering time-

Protective circuit/component-

Connection in parallel-

Output power-

MTBF (IEC 61709, SN 29500)-

Insulation voltage output / PE-

Conductor cross section solid min.-

Conductor cross section AWG max.-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

UL approvals-

Contact discharge-

Test field strength-

Input-

Criterion B-

ECLASS 11.0-

ECLASS 4.0-

Depth-

Degree of protection-

Max. permissible relative humidity (operation)-

Input voltage range-

AC frequency range-

REACh SVHC-

Recommended breaker for input protection-

POWER BOOST (IBoost)-

Connection in series-

Active current limitation-

Typical response time-

Housing material-

Assembly instructions-

Connection method-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic HF field-

Signal-

Criterion A-

ECLASS 4.1-

ETIM 4.0-

UNSPSC 12.01-

Width with alternative assembly-

Ambient temperature (operation)-

Installation height-

Nominal power consumption-

Nominal output current (IN)-

Selective Fuse Breaking (ISFB)-

Protection against overvoltage at the output (OVP)-

Net weight-

Insulation voltage input / PE-

Mounting position-

Conductor cross section flexible min.-

Stripping length-

EMC requirements for noise emission-

Standard – Safety extra-low voltage-

Standard - Approval for medical use-

CSA-

Electrostatic discharge-

Low Voltage Directive-

Fast transients (burst)-

Output-

Voltage-

China RoHS-

ECLASS 5.0-

ETIM 3.0-

ETIM 6.0-

UNSPSC 6.01-

UNSPSC 20.0-

Width-

Height with alternative assembly-

Climatic class-

Current consumption-

Type of protection-

Setting range of the output voltage (USet)-

Feedback voltage resistance-

Residual ripple-

Power loss nominal load max.-

Insulation voltage input/output-

Protection class-

Conductor cross section AWG min.-

EMC requirements for noise immunity-

Standard - Electrical safety-

Standard - Equipment safety-

Standard - Safe isolation-

Electromagnetic compatibility-

Frequency range-

Surge voltage load (surge)-

Conducted interference-

ECLASS 6.0-

ETIM 7.0-

UNSPSC 21.0-

Depth with alternative assembly-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range DC-

Inrush current-

Nominal output voltage-

Derating-

Control deviation-

Maximum power dissipation in no-load condition-

Efficiency-

Conductor cross section solid max.-

Conductor cross section flexible max.-

Screw thread-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Rail applications-

Discharge in air-

Comments-

I/O/S-

ECLASS 10.0.1-

ECLASS 5.1-

ECLASS 9.0-

UNSPSC 11-

UNSPSC 18.0-

ECLASS 7.0-

UNSPSC 7.0901-

UNSPSC 13.2-

UNSPSC 19.0-

Height90 mm

Degree of protectionIP20

Ambient temperature (operation)-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)

Nominal power consumption206.3 VA

Mains buffering time> 20 ms (120 V AC)

Protective circuit/componentVaristor

Feedback voltage resistance< 25 V DC

Output power100 W

Depth84 mm

Inflammability class in acc. with UL 94 (housing / terminal blocks)V0

Climatic class3K3 (in acc. with EN 60721)

Input voltage range85 V AC ... 264 V AC

Inrush current< 30 A (typical)

Type of protectionTransient surge protection

Width55 mm

Installation distance top/bottom30 mm / 30 mm

Ambient temperature (storage/transport)-40 °C ... 85 °C

Nominal input voltage range100 V AC ... 240 V AC

Frequency range (fN)50 Hz ... 60 Hz 10 %

Input fuse4 A (slow-blow, internal)

Power factor (cos phi)0.54

Connection in parallelYes, for redundancy and increased capacity

Residual ripple< 75 mVPP (with nominal values)

Control deviation< 1 % (change in load, static 10 % ... 90 %)

Efficiencytyp. 89 % (120 V AC)

Standard – Safety extra-low voltageIEC 62368-1 (SELV) und EN 60204-1 (PELV)

Discharge in air8 kV (Test Level 3)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dipsEN 61000-4-11

ECLASS 10.0.127040701

ETIM 6.0EC002540

UNSPSC 1139121004

UNSPSC 19.039121004

Installation distance right/left0 mm / 0 mm

Degree of pollution2

Current consumption2.19 A (100 V AC)

Recommended breaker for input protection6 A ... 16 A (Characteristics B, C, D, K)

Nominal output current (IN)6.67 A (-25 °C ... 55 °C)

Nominal output voltage15 V DC ±1 %

Connection in seriesyes

Net weight0.34 kg

Protection classII (in closed control cabinet)

Assembly instructionsalignable: 0 mm horizontally, 30 mm vertically

Conductor cross section AWG min.24

Screw threadM3

Standard - Safety of transformersEN 61558-2-16

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU

Contact discharge6 kV (Test Level 3)

Input2 kV (Test Level 3 - symmetrical)

Criterion ANormal operating behavior within the specified limits.

ECLASS 4.027040700

ECLASS 5.127049000

ETIM 3.0EC001039

UNSPSC 12.0139121004

UNSPSC 21.039121004

MTBF (IEC 61709, SN 29500)> 727000 h (40 °C)

Foot latch materialPOM (Polyoxymethylen)

Mounting positionhorizontal DIN rail NS 35, EN 60715

Conductor cross section flexible max.2.5 mm²

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 2 - symmetrical)

China RoHSEnvironmentally Friendly Use Period = 25;

ECLASS 6.027049000

ECLASS 7.027049002

UNSPSC 7.090139121004

UNSPSC 18.039121004

ECLASS 5.027049000

ECLASS 9.027040701

ETIM 7.0EC002540

UNSPSC 20.039121004

Derating55 °C ... 70 °C (2.5%/K)

Typical response time< 1 s

Housing materialPolycarbonate

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationDIN VDE 0100-410

Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

ECLASS 4.127040700

ETIM 4.0EC000599

Power loss nominal load max.< 12 W

Conductor cross section solid min.0.2 mm²

Stripping length8 mm

Low Voltage DirectiveConformance with Low Voltage Directive 2014/35/EC

Test field strength10 V/m

Voltage10 V (Test Level 3)

Conducted interferenceEN 61000-4-6

UNSPSC 6.0130211502

Insulation voltage input/output4 kV AC (type test)

Connection methodScrew connection

Conductor cross section flexible min.0.2 mm²

Standard - Electrical safetyIEC 62368-1/VDE 0805 (SELV)

Frequency range10 kHz ... 80 MHz

Protection against overvoltage at the output (OVP)≤ 25 V DC

Maximum power dissipation in no-load condition< 0.4 W

Conductor cross section solid max.2.5 mm²

Conductor cross section AWG max.14

Mains variation/undervoltageEN 61000-4-11

UL approvalsUL/C-UL listed UL 508

Electrostatic dischargeEN 61000-4-2

ECLASS 11.027040701

UNSPSC 13.239121004

Ambient temperature (operation)-40 °C ... 80 °C (cable, fixed installation)

Standards/regulationsM8 connector IEC 61076-2-104

Status displayNo

Degree of pollution3

Material, knurlsZinc die-cast, nickel-plated

Conductor cross section3x 0.25 mm² (Signal line)

Overall twist3 wires, twisted

Core diameter including insulation1.17 mm ±0.02 mm (Signal line)

Number of bending cycles10000000

Cable weight26 kg/km

Test voltage, cable3000 V

Resistance to oilin accordance with DIN EN 60811-2-1

ECLASS 4.027060300

ETIM 3.0EC001855

ETIM 7.0EC001855

UNSPSC 1131251501

Insulation resistance≥ 100 GΩ*km

Torque0.2 Nm (M8 connectors)

Contact surface materialNi/Au

NoteThis item is a sensor/actuator cable with a freely selectable cable type. The technical data for all possible cable types is listed in the table below.

Cable type (abbreviation)PUR

Conductor structure signal line32x 0.10 mm

External cable diameter D4.35 mm ±0.2 mm

Smallest bending radius, movable installation44 mm

Acceleration10 m/s²

Conductor resistancemax. 79 Ω/km

Flame resistancein accordance with UL 758/1581 FT2

China RoHSEnvironmentally Friendly Use Period = 50 years

ECLASS 5.027061800

ETIM 4.0EC001855

ECLASS 9.027060311

UNSPSC 20.031251501

Length of cableFree input (0.2 ... 40.0 m)

Number of positions3

Protective circuit/componentunwired

Contact carrier materialTPU GF

Cable typePUR halogen-free black

UL AWM style20549

Thickness, insulation≥ 0.21 mm (Core insulation)

Optical shield covering80 %

Smallest bending radius, fixed installation22 mm

Bending radius50 mm

Outer sheath, materialPUR

Nominal voltage, cable300 V

REACh SVHCLead 7439-92-1

ECLASS 4.127060300

ECLASS 6.027279200

UNSPSC 7.090131251501

UNSPSC 21.031251501

Rated current at 40°C4 A

CodingA - standard

Overvoltage categoryII

Flammability rating according to UL 94HB

Contact materialCuSn

Standards/specificationsM8 connector IEC 61076-2-104

Wire colorsbrown, blue, black

ShieldingBraided copper wires

Traversing rate3 m/s

Material conductor insulationPP

Other resistanceHighly resistant to acids, alkaline solutions and solvents

ECLASS 10.0.127060311

ECLASS 11.027060311

ETIM 6.0EC001855

UNSPSC 19.031251501

UNSPSC 12.0131251501

Degree of protectionIP65

Rated voltage48 V AC

Insertion/withdrawal cycles≥ 100

Material of grip bodyTPU, hardly inflammable, self-extinguishing

Sealing materialNBR

Cable abbreviationLi9Y-V1-C-V1-11Y

AWG signal line24

External sheath, colorblack-gray RAL 7021

Traversing path10 m

Conductor materialBare Cu litz wires

Special propertiesFlexible cable conduit capable

Halogen-freein accordance with DIN VDE 0472 part 815

ECLASS 7.027279218

ECLASS 5.127061800

UNSPSC 13.231251501

UNSPSC 6.0131251501

Height-

Ambient temperature (start-up type tested)-

Degree of pollution-

Discharge current to PE-

Mains buffering time-

Protective circuit/component-

Connection in parallel-

Output power-

MTBF (IEC 61709, SN 29500)-

Insulation voltage output / PE-

Conductor cross section solid min.-

Conductor cross section AWG max.-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

UL approvals-

Contact discharge-

Test field strength-

Input-

Criterion B-

ECLASS 11.0-

ECLASS 4.0-

Depth-

Degree of protection-

Max. permissible relative humidity (operation)-

Input voltage range-

AC frequency range-

REACh SVHC-

Recommended breaker for input protection-

POWER BOOST (IBoost)-

Connection in series-

Active current limitation-

Typical response time-

Housing material-

Assembly instructions-

Connection method-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic HF field-

Signal-

Criterion A-

ECLASS 4.1-

ETIM 4.0-

UNSPSC 12.01-

Width with alternative assembly-

Ambient temperature (operation)-

Installation height-

Nominal power consumption-

Nominal output current (IN)-

Selective Fuse Breaking (ISFB)-

Protection against overvoltage at the output (OVP)-

Net weight-

Insulation voltage input / PE-

Mounting position-

Conductor cross section flexible min.-

Stripping length-

EMC requirements for noise emission-

Standard – Safety extra-low voltage-

Standard - Approval for medical use-

CSA-

Electrostatic discharge-

Low Voltage Directive-

Fast transients (burst)-

Output-

Voltage-

China RoHS-

ECLASS 5.0-

ETIM 3.0-

ETIM 6.0-

UNSPSC 6.01-

UNSPSC 20.0-

Width-

Height with alternative assembly-

Climatic class-

Current consumption-

Type of protection-

Setting range of the output voltage (USet)-

Feedback voltage resistance-

Residual ripple-

Power loss nominal load max.-

Insulation voltage input/output-

Protection class-

Conductor cross section AWG min.-

EMC requirements for noise immunity-

Standard - Electrical safety-

Standard - Equipment safety-

Standard - Safe isolation-

Electromagnetic compatibility-

Frequency range-

Surge voltage load (surge)-

Conducted interference-

ECLASS 6.0-

ETIM 7.0-

UNSPSC 21.0-

Depth with alternative assembly-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range DC-

Inrush current-

Nominal output voltage-

Derating-

Control deviation-

Maximum power dissipation in no-load condition-

Efficiency-

Conductor cross section solid max.-

Conductor cross section flexible max.-

Screw thread-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Rail applications-

Discharge in air-

Comments-

I/O/S-

ECLASS 10.0.1-

ECLASS 5.1-

ECLASS 9.0-

UNSPSC 11-

UNSPSC 18.0-

ECLASS 7.0-

UNSPSC 7.0901-

UNSPSC 13.2-

UNSPSC 19.0-

Height-

Degree of protection-

Ambient temperature (operation)-

Max. permissible relative humidity (operation)-

Nominal power consumption-

Mains buffering time-

Protective circuit/component-

Feedback voltage resistance-

Output power-

Depth-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class-

Input voltage range-

Inrush current-

Type of protection-

Width-

Installation distance top/bottom-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallel-

Residual ripple-

Control deviation-

Efficiency-

Standard – Safety extra-low voltage-

Discharge in air-

Comments-

Surge voltage load (surge)-

Voltage dips-

ECLASS 10.0.1-

ETIM 6.0-

UNSPSC 11-

UNSPSC 19.0-

Installation distance right/left-

Degree of pollution-

Current consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Nominal output voltage-

Connection in series-

Net weight-

Protection class-

Assembly instructions-

Conductor cross section AWG min.-

Screw thread-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic compatibility-

Contact discharge-

Input-

Criterion A-

ECLASS 4.0-

ECLASS 5.1-

ETIM 3.0-

UNSPSC 12.01-

UNSPSC 21.0-

MTBF (IEC 61709, SN 29500)-

Foot latch material-

Mounting position-

Conductor cross section flexible max.-

EMC requirements for noise immunity-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSA-

Fast transients (burst)-

Electromagnetic HF field-

Output-

China RoHS-

ECLASS 6.0-

ECLASS 7.0-

UNSPSC 7.0901-

UNSPSC 18.0-

ECLASS 5.0-

ECLASS 9.0-

ETIM 7.0-

UNSPSC 20.0-

Derating-

Typical response time-

Housing material-

EMC requirements for noise emission-

Standard - Safe isolation-

Criterion B-

ECLASS 4.1-

ETIM 4.0-

Power loss nominal load max.-

Conductor cross section solid min.-

Stripping length-

Low Voltage Directive-

Test field strength-

Voltage-

Conducted interference-

UNSPSC 6.01-

Insulation voltage input/output-

Connection method-

Conductor cross section flexible min.-

Standard - Electrical safety-

Frequency range-

Protection against overvoltage at the output (OVP)-

Maximum power dissipation in no-load condition-

Conductor cross section solid max.-

Conductor cross section AWG max.-

Mains variation/undervoltage-

UL approvals-

Electrostatic discharge-

ECLASS 11.0-

UNSPSC 13.2-