1234353 Phoenix Contact Data & Networking Devices

Ambient temperature (operation)-25 °C ... 70 °C (> 55 °C De...

Altitude-

Housing materialPolycarbonate

Net weight0.34 kg

Supply voltage range-

Conductor cross section solid min.0.2 mm²

No. of ports-

SIM interface 1-

LTE-

Web-based management-

Current output signal-

Identification-

ECLASS 10.0.127040701

Ambient temperature (storage/transport)-40 °C ... 85 °C

Electrical isolation-

Mounting type-

Color-

Conductor cross section, flexible, with ferrule, with plastic sleeve-

Conductor cross section AWG max.14

Interface-

Interface description-

Data rate-

Country support-

Management-

Voltage input signal-

Height90 mm

Permissible humidity (storage/transport)-

MTTF-

Max. current consumption-

Conductor cross section flexible max.2.5 mm²

Conductor cross section AWG min.24

Stripping length8 mm

Antenna-

EDGE-

Operating mode-

Voltage output signal-

Switching level "1" signal-

ECLASS 11.027040701

Width55 mm

Permissible humidity (operation)-

Wireless licences-

Typical current consumption-

Conductor cross section flexible, with ferrule without plastic sleeve-

Conductor cross section solid max.2.5 mm²

Serial transmission speed-

UMTS-

Frequency-

Number of outputs-

Number of inputs-

Designation-

Depth84 mm

Degree of protectionIP20

Electromagnetic compatibilityConformance with EMC Directi...

Connection methodScrew connection

Conductor cross section flexible min.0.2 mm²

Interface 1-

Transmission length-

Frequency range10 kHz ... 80 MHz

GPRS-

Output name-

Description of the input-

China RoHSEnvironmentally Friendly Use...

ECLASS 9.027040701

Width with alternative assembly-

Climatic class3K3 (in acc. with EN 60721)

AC frequency range-

Mains buffering time> 20 ms (120 V AC)

Nominal output voltage15 V DC ±1 %

Connection in parallelYes, for redundancy and incr...

Connection in seriesyes

Typical response time< 1 s

Environmental protection directive-

Protection classII (in closed control cabine...

Low Voltage DirectiveConformance with Low Voltage...

Flicker-

I/O/S-

Installation distance top/bottom30 mm / 30 mm

Degree of pollution2

Current consumption2.19 A (100 V AC)

Protective circuit/componentVaristor

Dynamic Boost (IDyn.Boost)-

Selective Fuse Breaking (ISFB)-

Output power100 W

MTBF (IEC 61709, SN 29500)> 727000 h (40 °C)

Assembly instructionsalignable: 0 mm horizontally...

EMC requirements for noise emissionEN 61000-6-3

Standard - Safety of transformersEN 61558-2-16

Standard - safety for equipment for measurement, control, and laboratory use-

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Mains variation/undervoltageEN 61000-4-11

CSACAN/CSA-C22.2 No. 60950-1-07

SIQ-

DNV GL noise radiation-

Discharge in air8 kV (Test Level 3)

Fast transients (burst)EN 61000-4-4

Conducted interferenceEN 61000-4-6

Voltage dipsEN 61000-4-11

Attenuated sinusoidal oscillations (ring wave)-

Test level 4-

Attenuated oscillating wave-

REACh SVHC-

ECLASS 5.127049000

ECLASS 7.027049002

UNSPSC 21.039121004

Depth with alternative assembly-

Installation height-

Frequency range (fN)50 Hz ... 60 Hz 10 %

Nominal power consumption206.3 VA

Recommended breaker for input protection6 A ... 16 A (Characteristic...

Nominal output current (IN)6.67 A (-25 °C ... 55 °C)

Protection against overvoltage at the output (OVP)≤ 25 V DC

Residual ripple< 75 mVPP (with nominal valu...

Insulation voltage input/output4 kV AC (type test)

EMC requirements for noise immunityEN 61000-6-1

Standard – Safety extra-low voltageIEC 62368-1 (SELV) und EN 60...

UL approvalsUL/C-UL listed UL 508

Shipbuilding approval-

Harmonic currents-

Electrostatic dischargeEN 61000-4-2

Electromagnetic HF fieldEN 61000-4-3

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dip-

Test level 1-

Test level 5-

Input, output (test level 2)-

Signals (test level 2)-

ETIM 6.0EC002540

UNSPSC 20.039121004

Height with alternative assembly-

Inflammability class in acc. with UL 94 (housing / terminal blocks)V0

Discharge current to PE-

Power factor (cos phi)0.54

Static Boost (IStat.Boost)-

Feedback voltage resistance< 25 V DC

Maximum power dissipation in no-load condition< 0.4 W

Efficiencytyp. 89 % (120 V AC)

Insulation voltage input / PE-

EMC requirements, power plant-

Standard - Electrical safetyIEC 62368-1/VDE 0805 (SELV)

Standard - power supply devices for low voltage with DC output-

Conducted noise emission-

DNV GL conducted interference-

Test field strength10 V/m

Output1 kV (Test Level 2 - symmetr...

Voltage10 V (Test Level 3)

Pulse-shape magnetic field-

Asymmetrical conducted disturbance variables-

Test level 6-

Signals (test level 1)-

ECLASS 6.027049000

UNSPSC 13.239121004

Installation distance right/left0 mm / 0 mm

Ambient temperature (start-up type tested)-

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Input voltage range85 V AC ... 264 V AC

Nominal input voltage range100 V AC ... 240 V AC

Inrush current< 30 A (typical)

Type of protectionTransient surge protection

Setting range of the output voltage (USet)-

Derating55 °C ... 70 °C (2.5%/K)

Control deviation< 1 % (change in load, stati...

Power loss nominal load max.< 12 W

Insulation voltage output / PE-

Mounting positionhorizontal DIN rail NS 35, E...

HART FSK Physical Layer Test Specification Compliance-

Standard - Safe isolationDIN VDE 0100-410

Rail applications-

Noise emission-

Contact discharge6 kV (Test Level 3)

Additional text-

Input2 kV (Test Level 3 - symmetr...

Signal-

Number of periods-

Test level 3-

Input, output (test level 3)-

Criterion BTemporary impairment to oper...

ECLASS 5.027049000

ETIM 7.0EC002540

UNSPSC 18.039121004

Power frequency magnetic field-

Damped oscillating magnetic field-

Test level 2-

Input, output (test level 1)-

Criterion ANormal operating behavior wi...

Criterion C-

UNSPSC 19.039121004

Input fuse4 A (slow-blow, internal)

UNSPSC 1139121004

Screw threadM3

ECLASS 4.027040700

ETIM 3.0EC001039

UNSPSC 12.0139121004

Foot latch materialPOM (Polyoxymethylen)

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

UNSPSC 7.090139121004

ECLASS 4.127040700

ETIM 4.0EC000599

UNSPSC 6.0130211502

Ambient temperature (operation)-40 °C ... 70 °C

Altitude≤ 5000 m (For restrictions, ...

Housing materialPolycarbonate

Net weight0 g

Supply voltage range10 V DC ... 30 V DC (Via plu...

Conductor cross section solid min.0.14 mm²

No. of ports2

SIM interface 11.8 volt, 3 volt

LTECAT4

Web-based managementyes

Current output signal≤ 50 mA (Not short-circuit p...

IdentificationCE-compliant

ECLASS 10.0.119170502

Ambient temperature (storage/transport)-40 °C ... 85 °C

Electrical isolationVCC // LTE // Ethernet // PE

Mounting typeDIN rail mounting

Colorgray

Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 0.75 mm²

Conductor cross section AWG max.16

InterfaceEthernet

Interface descriptionWLAN in accordance with IEEE...

Data rate11 Mbps (2.4 GHz)

Country supportEurope

ManagementWeb-based management, SNMP

Voltage input signal10 V DC ... 30 V DC

Height130 mm

Permissible humidity (storage/transport)10 % ... 95 % (non-condensin...

MTTF384 Years (SN 29500 standard...

Max. current consumption1.5 A

Conductor cross section flexible max.1.50 mm²

Conductor cross section AWG min.26

Stripping length9 mm

Antenna50 Ω impedance SMA antenna s...

EDGEMultislot Class 12

Operating modeAccess point

Voltage output signal10 V DC ... 30 V DC (dependi...

Switching level "1" signal10 V DC ... 30 V DC

ECLASS 11.019170502

Width45 mm

Permissible humidity (operation)10 % ... 95 % (non-condensin...

Wireless licencesEurope

Typical current consumption< 180 mA (24 V DC)

Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm²

Conductor cross section solid max.1.50 mm²

Serial transmission speed10/100 Mbps, auto negotiatio...

UMTSHSPA 3GPP R8

Frequency5 GHz

Number of outputs2

Number of inputs4

DesignationCE

Depth130 mm

Degree of protectionIP20

Electromagnetic compatibilityConformance with RED Directi...

Connection methodRJ45 jack, shielded

Conductor cross section flexible min.0.14 mm²

Interface 1Ethernet interface, 10/100Ba...

Transmission length100 m (shielded twisted pair...

Frequency range800 MHz (LTE B20)

GPRSClass 12, Class B

Output nameDigital output

Description of the inputDigital input

China RoHSEnvironmentally friendly use...

ECLASS 9.019170103

Width with alternative assembly-

Climatic class-

AC frequency range-

Mains buffering time-

Nominal output voltage-

Connection in parallel-

Connection in series-

Typical response time-

Environmental protection directive-

Protection class-

Low Voltage Directive-

Flicker-

I/O/S-

Installation distance top/bottom-

Degree of pollution-

Current consumption-

Protective circuit/component-

Dynamic Boost (IDyn.Boost)-

Selective Fuse Breaking (ISFB)-

Output power-

MTBF (IEC 61709, SN 29500)-

Assembly instructions-

EMC requirements for noise emission-

Standard - Safety of transformers-

Standard - safety for equipment for measurement, control, and laboratory use-

Standard – Limitation of mains harmonic currents-

Mains variation/undervoltage-

CSA-

SIQ-

DNV GL noise radiation-

Discharge in air-

Fast transients (burst)-

Conducted interference-

Voltage dips-

Attenuated sinusoidal oscillations (ring wave)-

Test level 4-

Attenuated oscillating wave-

REACh SVHC-

ECLASS 5.1-

ECLASS 7.0-

UNSPSC 21.0-

Depth with alternative assembly-

Installation height-

Frequency range (fN)-

Nominal power consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Protection against overvoltage at the output (OVP)-

Residual ripple-

Insulation voltage input/output-

EMC requirements for noise immunity-

Standard – Safety extra-low voltage-

UL approvals-

Shipbuilding approval-

Harmonic currents-

Electrostatic discharge-

Electromagnetic HF field-

Comments-

Surge voltage load (surge)-

Voltage dip-

Test level 1-

Test level 5-

Input, output (test level 2)-

Signals (test level 2)-

ETIM 6.0-

UNSPSC 20.0-

Height with alternative assembly-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Discharge current to PE-

Power factor (cos phi)-

Static Boost (IStat.Boost)-

Feedback voltage resistance-

Maximum power dissipation in no-load condition-

Efficiency-

Insulation voltage input / PE-

EMC requirements, power plant-

Standard - Electrical safety-

Standard - power supply devices for low voltage with DC output-

Conducted noise emission-

DNV GL conducted interference-

Test field strength-

Output-

Voltage-

Pulse-shape magnetic field-

Asymmetrical conducted disturbance variables-

Test level 6-

Signals (test level 1)-

ECLASS 6.0-

UNSPSC 13.2-

Installation distance right/left-

Ambient temperature (start-up type tested)-

Max. permissible relative humidity (operation)-

Input voltage range-

Nominal input voltage range-

Inrush current-

Type of protection-

Setting range of the output voltage (USet)-

Derating-

Control deviation-

Power loss nominal load max.-

Insulation voltage output / PE-

Mounting position-

HART FSK Physical Layer Test Specification Compliance-

Standard - Safe isolation-

Rail applications-

Noise emission-

Contact discharge-

Additional text-

Input-

Signal-

Number of periods-

Test level 3-

Input, output (test level 3)-

Criterion B-

ECLASS 5.0-

ETIM 7.0-

UNSPSC 18.0-

Power frequency magnetic field-

Damped oscillating magnetic field-

Test level 2-

Input, output (test level 1)-

Criterion A-

Criterion C-

UNSPSC 19.0-

Input fuse-

UNSPSC 11-

Screw thread-

ECLASS 4.0-

ETIM 3.0-

UNSPSC 12.01-

Foot latch material-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

UNSPSC 7.0901-

ECLASS 4.1-

ETIM 4.0-

UNSPSC 6.01-

Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C De...

Altitude-

Housing material-

Net weight1.1 kg

Supply voltage range-

Conductor cross section solid min.0.2 mm²

No. of ports-

SIM interface 1-

LTE-

Web-based management-

Current output signal-

Identification-

ECLASS 10.0.127040701

Ambient temperature (storage/transport)-40 °C ... 85 °C

Electrical isolation-

Mounting type-

Color-

Conductor cross section, flexible, with ferrule, with plastic sleeve-

Conductor cross section AWG max.16

Interface-

Interface description-

Data rate-

Country support-

Management-

Voltage input signal-

Height130 mm

Permissible humidity (storage/transport)-

MTTF-

Max. current consumption-

Conductor cross section flexible max.1.5 mm²

Conductor cross section AWG min.24

Stripping length8 mm

Antenna-

EDGE-

Operating mode-

Voltage output signal-

Switching level "1" signal-

ECLASS 11.027040701

Width70 mm

Permissible humidity (operation)-

Wireless licences-

Typical current consumption-

Conductor cross section flexible, with ferrule without plastic sleeve-

Conductor cross section solid max.1 mm²

Serial transmission speed-

UMTS-

Frequency50 Hz

Number of outputs-

Number of inputs-

Designation-

Depth125 mm

Degree of protectionIP20

Electromagnetic compatibilityConformance with EMC Directi...

Connection methodPush-in connection

Conductor cross section flexible min.0.2 mm²

Interface 1-

Transmission length-

Frequency range50 Hz ... 60 Hz

GPRS-

Output name-

Description of the input-

China RoHSEnvironmentally Friendly Use...

ECLASS 9.027040701

Width with alternative assembly122 mm

Climatic class3K3 (in acc. with EN 60721)

AC frequency range50 Hz ... 60 Hz -10 % ... +1...

Mains buffering timetyp. 33 ms (3x 400 V AC)

Nominal output voltage24 V DC

Connection in parallelYes, for redundancy and incr...

Connection in seriesyes

Typical response time300 ms (from SLEEP MODE)

Environmental protection directiveRoHS Directive 2011/65/EU

Protection classI

Low Voltage DirectiveConformance with Low Voltage...

FlickerEN 61000-3-3

I/O/Sasymmetrical

Installation distance top/bottom50 mm / 50 mm

Degree of pollution2

Current consumption3x 0.99 A (400 V AC)

Protective circuit/componentVaristor, gas-filled surge a...

Dynamic Boost (IDyn.Boost)30 A (5 s)

Selective Fuse Breaking (ISFB)120 A (15 ms)

Output power480 W

MTBF (IEC 61709, SN 29500)> 985000 h (25 °C)

Assembly instructionsalignable: PN ≥50%, 5 mm hor...

EMC requirements for noise emissionEN 61000-6-3

Standard - Safety of transformersIEC 61558-2-16 pending

Standard - safety for equipment for measurement, control, and laboratory useIEC 61010-1

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Mains variation/undervoltageSEMI F47-0706, EN 61000-4-11

CSACAN/CSA-C22.2 No. 60950-1-07

SIQBG (type approved)

DNV GL noise radiationClass B

Discharge in air15 kV (Test Level 4)

Fast transients (burst)EN 61000-4-4

Conducted interferenceEN 61000-4-6

Voltage dipsEN 61000-4-11

Attenuated sinusoidal oscillations (ring wave)EN 61000-4-12

Test level 415 kHz 150 kHz (Test Level 4...

Attenuated oscillating waveEN 61000-4-18

REACh SVHCLead 7439-92-1

ECLASS 5.127242200

ECLASS 7.027049002

UNSPSC 21.039121004

Depth with alternative assembly73 mm

Installation height≤ 5000 m (> 2000 m, observe ...

Frequency range (fN)50 Hz ... 60 Hz -10 % ... +1...

Nominal power consumption541 VA

Recommended breaker for input protection3x 4 A ... 20 A (Characteris...

Nominal output current (IN)20 A

Protection against overvoltage at the output (OVP)≤ 32 V DC

Residual ripple< 60 mVPP (with nominal valu...

Insulation voltage input/output4 kV AC (type test)

EMC requirements for noise immunityEN 61000-6-1

Standard – Safety extra-low voltageIEC 61010-1 (SELV)

UL approvalsUL Listed UL 508

Shipbuilding approvalDNV GL, PRS, BV, LR, ABS

Harmonic currentsEN 61000-3-2

Electrostatic dischargeEN 61000-4-2

Electromagnetic HF fieldEN 61000-4-3

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dip0 %

Test level 115 Hz 150 Hz (Test Level 4)

Test level 516.7 Hz 50 Hz 60 Hz (Test Le...

Input, output (test level 2)10 MHz

Signals (test level 2)100 kHz 1 MHz (Test Level 3 ...

ETIM 6.0EC002540

UNSPSC 20.039121004

Height with alternative assembly130 mm

Inflammability class in acc. with UL 94 (housing / terminal blocks)V0

Discharge current to PE< 3.5 mA

Power factor (cos phi)0.94

Static Boost (IStat.Boost)25 A

Feedback voltage resistance≤ 35 V DC

Maximum power dissipation in no-load condition< 7 W (400 V AC)

Efficiencytyp. 93.9 % (400 V AC)

Insulation voltage input / PE3.5 kV AC (type test)

EMC requirements, power plantIEC 61850-3

Standard - Electrical safetyIEC 61010-2-201 (SELV)

Standard - power supply devices for low voltage with DC outputEN 61204-3

Conducted noise emissionEN 55016

DNV GL conducted interferenceClass A

Test field strength110 A/m

Output1 kV (Test Level 3 - symmetr...

Voltage2.5 kV

Pulse-shape magnetic fieldEN 61000-4-9

Asymmetrical conducted disturbance variablesEN 61000-4-16

Test level 616.7 Hz 50 Hz 60 Hz (Test Le...

Signals (test level 1)100 kHz 1 MHz (Test Level 3 ...

ECLASS 6.027049000

UNSPSC 13.239121004

Installation distance right/left5 mm / 5 mm

Ambient temperature (start-up type tested)-40 °C

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Input voltage range3x 400 V AC ... 500 V AC -20...

Nominal input voltage range3x 400 V AC ... 500 V AC

Inrush currenttyp. 2 A (at 25 °C)

Type of protectionTransient surge protection

Setting range of the output voltage (USet)24 V DC ... 29.5 V DC (const...

Derating> 60 °C ... 70 °C (2.5%/K)

Control deviation< 0.5 % (Static load change ...

Power loss nominal load max.< 32 W (400 V AC)

Insulation voltage output / PE0.5 kV DC (type test)

Mounting positionhorizontal DIN rail NS 35, E...

HART FSK Physical Layer Test Specification ComplianceOutput voltage UOut complian...

Standard - Safe isolationIEC 61558-2-16 pending

Rail applicationsEN 50121-3-2

Noise emissionEN 55016

Contact discharge8 kV (Test Level 4)

Additional textTest Level 2

Input2 kV (Test Level 4 - symmetr...

Signal1 kV (Test Level 2 - asymmet...

Number of periods0,5 / 1 / 5 / 50 / 250 perio...

Test level 31.5 kHz 15 kHz (Test Level 4...

Input, output (test level 3)100 kHz 1 MHz (Test Level 3 ...

Criterion BTemporary impairment to oper...

ECLASS 5.027242200

ETIM 7.0EC002540

UNSPSC 18.039121004

Power frequency magnetic fieldEN 61000-4-8

Damped oscillating magnetic fieldEN 61000-4-10

Test level 2150 Hz 1.5 kHz (Test Level 4...

Input, output (test level 1)100 kHz 1 MHz (Test Level 3 ...

Criterion ANormal operating behavior wi...

Criterion CTemporary adverse effects on...

UNSPSC 19.039121004

Input fuse-

UNSPSC 11-

Screw thread-

ECLASS 4.0-

ETIM 3.0-

UNSPSC 12.01-

Foot latch material-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

UNSPSC 7.0901-

ECLASS 4.1-

ETIM 4.0-

UNSPSC 6.01-

Ambient temperature (operation)-25 °C ... 70 °C (> 55 °C De...

Altitude-

Housing materialPolycarbonate

Net weight0.34 kg

Supply voltage range-

Conductor cross section solid min.0.2 mm²

No. of ports-

SIM interface 1-

LTE-

Web-based management-

Current output signal-

Identification-

ECLASS 10.0.127040701

Ambient temperature (storage/transport)-40 °C ... 85 °C

Electrical isolation-

Mounting type-

Color-

Conductor cross section, flexible, with ferrule, with plastic sleeve-

Conductor cross section AWG max.14

Interface-

Interface description-

Data rate-

Country support-

Management-

Voltage input signal-

Height90 mm

Permissible humidity (storage/transport)-

MTTF-

Max. current consumption-

Conductor cross section flexible max.2.5 mm²

Conductor cross section AWG min.24

Stripping length8 mm

Antenna-

EDGE-

Operating mode-

Voltage output signal-

Switching level "1" signal-

ECLASS 11.027040701

Width55 mm

Permissible humidity (operation)-

Wireless licences-

Typical current consumption-

Conductor cross section flexible, with ferrule without plastic sleeve-

Conductor cross section solid max.2.5 mm²

Serial transmission speed-

UMTS-

Frequency-

Number of outputs-

Number of inputs-

Designation-

Depth84 mm

Degree of protectionIP20

Electromagnetic compatibilityConformance with EMC Directi...

Connection methodScrew connection

Conductor cross section flexible min.0.2 mm²

Interface 1-

Transmission length-

Frequency range10 kHz ... 80 MHz

GPRS-

Output name-

Description of the input-

China RoHSEnvironmentally Friendly Use...

ECLASS 9.027040701

Width with alternative assembly-

Climatic class3K3 (in acc. with EN 60721)

AC frequency range-

Mains buffering time> 20 ms (120 V AC)

Nominal output voltage15 V DC ±1 %

Connection in parallelYes, for redundancy and incr...

Connection in seriesyes

Typical response time< 1 s

Environmental protection directive-

Protection classII (in closed control cabine...

Low Voltage DirectiveConformance with Low Voltage...

Flicker-

I/O/S-

Installation distance top/bottom30 mm / 30 mm

Degree of pollution2

Current consumption2.19 A (100 V AC)

Protective circuit/componentVaristor

Dynamic Boost (IDyn.Boost)-

Selective Fuse Breaking (ISFB)-

Output power100 W

MTBF (IEC 61709, SN 29500)> 727000 h (40 °C)

Assembly instructionsalignable: 0 mm horizontally...

EMC requirements for noise emissionEN 61000-6-3

Standard - Safety of transformersEN 61558-2-16

Standard - safety for equipment for measurement, control, and laboratory use-

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Mains variation/undervoltageEN 61000-4-11

CSACAN/CSA-C22.2 No. 60950-1-07

SIQ-

DNV GL noise radiation-

Discharge in air8 kV (Test Level 3)

Fast transients (burst)EN 61000-4-4

Conducted interferenceEN 61000-4-6

Voltage dipsEN 61000-4-11

Attenuated sinusoidal oscillations (ring wave)-

Test level 4-

Attenuated oscillating wave-

REACh SVHC-

ECLASS 5.127049000

ECLASS 7.027049002

UNSPSC 21.039121004

Depth with alternative assembly-

Installation height-

Frequency range (fN)50 Hz ... 60 Hz 10 %

Nominal power consumption206.3 VA

Recommended breaker for input protection6 A ... 16 A (Characteristic...

Nominal output current (IN)6.67 A (-25 °C ... 55 °C)

Protection against overvoltage at the output (OVP)≤ 25 V DC

Residual ripple< 75 mVPP (with nominal valu...

Insulation voltage input/output4 kV AC (type test)

EMC requirements for noise immunityEN 61000-6-1

Standard – Safety extra-low voltageIEC 62368-1 (SELV) und EN 60...

UL approvalsUL/C-UL listed UL 508

Shipbuilding approval-

Harmonic currents-

Electrostatic dischargeEN 61000-4-2

Electromagnetic HF fieldEN 61000-4-3

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dip-

Test level 1-

Test level 5-

Input, output (test level 2)-

Signals (test level 2)-

ETIM 6.0EC002540

UNSPSC 20.039121004

Height with alternative assembly-

Inflammability class in acc. with UL 94 (housing / terminal blocks)V0

Discharge current to PE-

Power factor (cos phi)0.54

Static Boost (IStat.Boost)-

Feedback voltage resistance< 25 V DC

Maximum power dissipation in no-load condition< 0.4 W

Efficiencytyp. 89 % (120 V AC)

Insulation voltage input / PE-

EMC requirements, power plant-

Standard - Electrical safetyIEC 62368-1/VDE 0805 (SELV)

Standard - power supply devices for low voltage with DC output-

Conducted noise emission-

DNV GL conducted interference-

Test field strength10 V/m

Output1 kV (Test Level 2 - symmetr...

Voltage10 V (Test Level 3)

Pulse-shape magnetic field-

Asymmetrical conducted disturbance variables-

Test level 6-

Signals (test level 1)-

ECLASS 6.027049000

UNSPSC 13.239121004

Installation distance right/left0 mm / 0 mm

Ambient temperature (start-up type tested)-

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Input voltage range85 V AC ... 264 V AC

Nominal input voltage range100 V AC ... 240 V AC

Inrush current< 30 A (typical)

Type of protectionTransient surge protection

Setting range of the output voltage (USet)-

Derating55 °C ... 70 °C (2.5%/K)

Control deviation< 1 % (change in load, stati...

Power loss nominal load max.< 12 W

Insulation voltage output / PE-

Mounting positionhorizontal DIN rail NS 35, E...

HART FSK Physical Layer Test Specification Compliance-

Standard - Safe isolationDIN VDE 0100-410

Rail applications-

Noise emission-

Contact discharge6 kV (Test Level 3)

Additional text-

Input2 kV (Test Level 3 - symmetr...

Signal-

Number of periods-

Test level 3-

Input, output (test level 3)-

Criterion BTemporary impairment to oper...

ECLASS 5.027049000

ETIM 7.0EC002540

UNSPSC 18.039121004

Power frequency magnetic field-

Damped oscillating magnetic field-

Test level 2-

Input, output (test level 1)-

Criterion ANormal operating behavior wi...

Criterion C-

UNSPSC 19.039121004

Input fuse4 A (slow-blow, internal)

UNSPSC 1139121004

Screw threadM3

ECLASS 4.027040700

ETIM 3.0EC001039

UNSPSC 12.0139121004

Foot latch materialPOM (Polyoxymethylen)

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

UNSPSC 7.090139121004

ECLASS 4.127040700

ETIM 4.0EC000599

UNSPSC 6.0130211502

Ambient temperature (operation)-40 °C ... 70 °C

Altitude≤ 5000 m (For restrictions, ...

Housing materialPolycarbonate

Net weight0 g

Supply voltage range10 V DC ... 30 V DC (Via plu...

Conductor cross section solid min.0.14 mm²

No. of ports2

SIM interface 11.8 volt, 3 volt

LTECAT4

Web-based managementyes

Current output signal≤ 50 mA (Not short-circuit p...

IdentificationCE-compliant

ECLASS 10.0.119170502

Ambient temperature (storage/transport)-40 °C ... 85 °C

Electrical isolationVCC // LTE // Ethernet // PE

Mounting typeDIN rail mounting

Colorgray

Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 0.75 mm²

Conductor cross section AWG max.16

InterfaceEthernet

Interface descriptionWLAN in accordance with IEEE...

Data rate11 Mbps (2.4 GHz)

Country supportEurope

ManagementWeb-based management, SNMP

Voltage input signal10 V DC ... 30 V DC

Height130 mm

Permissible humidity (storage/transport)10 % ... 95 % (non-condensin...

MTTF384 Years (SN 29500 standard...

Max. current consumption1.5 A

Conductor cross section flexible max.1.50 mm²

Conductor cross section AWG min.26

Stripping length9 mm

Antenna50 Ω impedance SMA antenna s...

EDGEMultislot Class 12

Operating modeAccess point

Voltage output signal10 V DC ... 30 V DC (dependi...

Switching level "1" signal10 V DC ... 30 V DC

ECLASS 11.019170502

Width45 mm

Permissible humidity (operation)10 % ... 95 % (non-condensin...

Wireless licencesEurope

Typical current consumption< 180 mA (24 V DC)

Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm²

Conductor cross section solid max.1.50 mm²

Serial transmission speed10/100 Mbps, auto negotiatio...

UMTSHSPA 3GPP R8

Frequency5 GHz

Number of outputs2

Number of inputs4

DesignationCE

Depth130 mm

Degree of protectionIP20

Electromagnetic compatibilityConformance with RED Directi...

Connection methodRJ45 jack, shielded

Conductor cross section flexible min.0.14 mm²

Interface 1Ethernet interface, 10/100Ba...

Transmission length100 m (shielded twisted pair...

Frequency range800 MHz (LTE B20)

GPRSClass 12, Class B

Output nameDigital output

Description of the inputDigital input

China RoHSEnvironmentally friendly use...

ECLASS 9.019170103

Width with alternative assembly-

Climatic class-

AC frequency range-

Mains buffering time-

Nominal output voltage-

Connection in parallel-

Connection in series-

Typical response time-

Environmental protection directive-

Protection class-

Low Voltage Directive-

Flicker-

I/O/S-

Installation distance top/bottom-

Degree of pollution-

Current consumption-

Protective circuit/component-

Dynamic Boost (IDyn.Boost)-

Selective Fuse Breaking (ISFB)-

Output power-

MTBF (IEC 61709, SN 29500)-

Assembly instructions-

EMC requirements for noise emission-

Standard - Safety of transformers-

Standard - safety for equipment for measurement, control, and laboratory use-

Standard – Limitation of mains harmonic currents-

Mains variation/undervoltage-

CSA-

SIQ-

DNV GL noise radiation-

Discharge in air-

Fast transients (burst)-

Conducted interference-

Voltage dips-

Attenuated sinusoidal oscillations (ring wave)-

Test level 4-

Attenuated oscillating wave-

REACh SVHC-

ECLASS 5.1-

ECLASS 7.0-

UNSPSC 21.0-

Depth with alternative assembly-

Installation height-

Frequency range (fN)-

Nominal power consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Protection against overvoltage at the output (OVP)-

Residual ripple-

Insulation voltage input/output-

EMC requirements for noise immunity-

Standard – Safety extra-low voltage-

UL approvals-

Shipbuilding approval-

Harmonic currents-

Electrostatic discharge-

Electromagnetic HF field-

Comments-

Surge voltage load (surge)-

Voltage dip-

Test level 1-

Test level 5-

Input, output (test level 2)-

Signals (test level 2)-

ETIM 6.0-

UNSPSC 20.0-

Height with alternative assembly-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Discharge current to PE-

Power factor (cos phi)-

Static Boost (IStat.Boost)-

Feedback voltage resistance-

Maximum power dissipation in no-load condition-

Efficiency-

Insulation voltage input / PE-

EMC requirements, power plant-

Standard - Electrical safety-

Standard - power supply devices for low voltage with DC output-

Conducted noise emission-

DNV GL conducted interference-

Test field strength-

Output-

Voltage-

Pulse-shape magnetic field-

Asymmetrical conducted disturbance variables-

Test level 6-

Signals (test level 1)-

ECLASS 6.0-

UNSPSC 13.2-

Installation distance right/left-

Ambient temperature (start-up type tested)-

Max. permissible relative humidity (operation)-

Input voltage range-

Nominal input voltage range-

Inrush current-

Type of protection-

Setting range of the output voltage (USet)-

Derating-

Control deviation-

Power loss nominal load max.-

Insulation voltage output / PE-

Mounting position-

HART FSK Physical Layer Test Specification Compliance-

Standard - Safe isolation-

Rail applications-

Noise emission-

Contact discharge-

Additional text-

Input-

Signal-

Number of periods-

Test level 3-

Input, output (test level 3)-

Criterion B-

ECLASS 5.0-

ETIM 7.0-

UNSPSC 18.0-

Power frequency magnetic field-

Damped oscillating magnetic field-

Test level 2-

Input, output (test level 1)-

Criterion A-

Criterion C-

UNSPSC 19.0-

Input fuse-

UNSPSC 11-

Screw thread-

ECLASS 4.0-

ETIM 3.0-

UNSPSC 12.01-

Foot latch material-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

UNSPSC 7.0901-

ECLASS 4.1-

ETIM 4.0-

UNSPSC 6.01-