2316372 Phoenix Contact Data & Networking Devices

Height130 mm

Net weight1.1 kg

Conductor cross section flexible max.1.5 mm²

Permissible humidity (operation)-

UL, USA/Canada-

Conductor cross section solid min.0.2 mm²

Standards/regulations-

ECLASS 10.0.127040701

UNSPSC 19.039121004

Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C De...

Mounting type-

Color-

Max. current consumption-

Conductor cross section flexible min.0.2 mm²

No. of ports-

Designation-

ECLASS 7.027049002

ECLASS 5.127242200

UNSPSC 13.239121004

UNSPSC 21.039121004

Depth125 mm

Permissible humidity (storage/transport)-

UL, Canada-

Conductor cross section solid max.1 mm²

Conductor cross section AWG min.24

China RoHSEnvironmentally Friendly Use...

ECLASS 5.027242200

ECLASS 9.027040701

UNSPSC 18.039121004

Ambient temperature (storage/transport)-40 °C ... 85 °C

Degree of protectionIP20

Supply voltage range-

Conductor cross section AWG max.16

Interface-

Connection methodPush-in connection

ECLASS 6.027049000

ETIM 7.0EC002540

Width70 mm

UNSPSC 20.039121004

Interface 1-

ECLASS 11.027040701

ETIM 6.0EC002540

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Nominal power consumption541 VA

Mains buffering timetyp. 33 ms (3x 400 V AC)

Protective circuit/componentVaristor, gas-filled surge a...

Feedback voltage resistance≤ 35 V DC

Output power480 W

Inflammability class in acc. with UL 94 (housing / terminal blocks)V0

Climatic class3K3 (in acc. with EN 60721)

Input voltage range3x 400 V AC ... 500 V AC -20...

Inrush currenttyp. 2 A (at 25 °C)

Type of protectionTransient surge protection

Installation distance top/bottom50 mm / 50 mm

Nominal input voltage range3x 400 V AC ... 500 V AC

Frequency range (fN)50 Hz ... 60 Hz -10 % ... +1...

Input fuse-

Power factor (cos phi)0.94

Connection in parallelYes, for redundancy and incr...

Residual ripple< 60 mVPP (with nominal valu...

Control deviation< 0.5 % (Static load change ...

Efficiencytyp. 93.9 % (400 V AC)

Standard – Safety extra-low voltageIEC 61010-1 (SELV)

Discharge in air15 kV (Test Level 4)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dipsEN 61000-4-11

UNSPSC 11-

Installation distance right/left5 mm / 5 mm

Degree of pollution2

Current consumption3x 0.99 A (400 V AC)

Recommended breaker for input protection3x 4 A ... 20 A (Characteris...

Nominal output current (IN)20 A

Nominal output voltage24 V DC

Connection in seriesyes

Protection classI

Assembly instructionsalignable: PN ≥50%, 5 mm hor...

Screw thread-

Standard - Safety of transformersIEC 61558-2-16 pending

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directi...

Contact discharge8 kV (Test Level 4)

Input2 kV (Test Level 4 - symmetr...

Criterion ANormal operating behavior wi...

ECLASS 4.0-

ETIM 3.0-

UNSPSC 12.01-

MTBF (IEC 61709, SN 29500)> 985000 h (25 °C)

Foot latch material-

Mounting positionhorizontal DIN rail NS 35, E...

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 3 - symmetr...

UNSPSC 7.0901-

Derating> 60 °C ... 70 °C (2.5%/K)

Typical response time300 ms (from SLEEP MODE)

Housing material-

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationIEC 61558-2-16 pending

Criterion BTemporary impairment to oper...

ECLASS 4.1-

ETIM 4.0-

Power loss nominal load max.< 32 W (400 V AC)

Stripping length8 mm

Low Voltage DirectiveConformance with Low Voltage...

Test field strength110 A/m

Voltage2.5 kV

Conducted interferenceEN 61000-4-6

UNSPSC 6.01-

Insulation voltage input/output4 kV AC (type test)

Standard - Electrical safetyIEC 61010-2-201 (SELV)

Frequency range50 Hz ... 60 Hz

Protection against overvoltage at the output (OVP)≤ 32 V DC

Maximum power dissipation in no-load condition< 7 W (400 V AC)

Mains variation/undervoltageSEMI F47-0706, EN 61000-4-11

UL approvalsUL Listed UL 508

Electrostatic dischargeEN 61000-4-2

Width with alternative assembly122 mm

AC frequency range50 Hz ... 60 Hz -10 % ... +1...

Environmental protection directiveRoHS Directive 2011/65/EU

FlickerEN 61000-3-3

I/O/Sasymmetrical

Dynamic Boost (IDyn.Boost)30 A (5 s)

Selective Fuse Breaking (ISFB)120 A (15 ms)

Standard - safety for equipment for measurement, control, and laboratory useIEC 61010-1

SIQBG (type approved)

DNV GL noise radiationClass B

Attenuated sinusoidal oscillations (ring wave)EN 61000-4-12

Test level 415 kHz 150 kHz (Test Level 4...

Attenuated oscillating waveEN 61000-4-18

REACh SVHCLead 7439-92-1

Depth with alternative assembly73 mm

Installation height≤ 5000 m (> 2000 m, observe ...

Shipbuilding approvalDNV GL, PRS, BV, LR, ABS

Harmonic currentsEN 61000-3-2

Voltage dip0 %

Test level 115 Hz 150 Hz (Test Level 4)

Test level 516.7 Hz 50 Hz 60 Hz (Test Le...

Input, output (test level 2)10 MHz

Signals (test level 2)100 kHz 1 MHz (Test Level 3 ...

Height with alternative assembly130 mm

Discharge current to PE< 3.5 mA

Static Boost (IStat.Boost)25 A

Insulation voltage input / PE3.5 kV AC (type test)

EMC requirements, power plantIEC 61850-3

Standard - power supply devices for low voltage with DC outputEN 61204-3

Conducted noise emissionEN 55016

DNV GL conducted interferenceClass A

Pulse-shape magnetic fieldEN 61000-4-9

Asymmetrical conducted disturbance variablesEN 61000-4-16

Test level 616.7 Hz 50 Hz 60 Hz (Test Le...

Signals (test level 1)100 kHz 1 MHz (Test Level 3 ...

Ambient temperature (start-up type tested)-40 °C

Setting range of the output voltage (USet)24 V DC ... 29.5 V DC (const...

Insulation voltage output / PE0.5 kV DC (type test)

HART FSK Physical Layer Test Specification ComplianceOutput voltage UOut complian...

Rail applicationsEN 50121-3-2

Noise emissionEN 55016

Additional textTest Level 2

Signal1 kV (Test Level 2 - asymmet...

Frequency50 Hz

Number of periods0,5 / 1 / 5 / 50 / 250 perio...

Test level 31.5 kHz 15 kHz (Test Level 4...

Input, output (test level 3)100 kHz 1 MHz (Test Level 3 ...

Power frequency magnetic fieldEN 61000-4-8

Damped oscillating magnetic fieldEN 61000-4-10

Test level 2150 Hz 1.5 kHz (Test Level 4...

Input, output (test level 1)100 kHz 1 MHz (Test Level 3 ...

Criterion CTemporary adverse effects on...

Height100 mm

Net weight222 g

Conductor cross section flexible max.2.5 mm²

Permissible humidity (operation)5 % ... 95 % (non-condensing...

UL, USA/CanadaUL 508 Listed

Conductor cross section solid min.0.2 mm²

Standards/regulationsIEC 61158-2

ECLASS 10.0.127242610

UNSPSC 19.032151602

Ambient temperature (operation)-20 °C ... 60 °C

Mounting typeDIN rail: 35 mm

Colorgreen

Max. current consumption800 mA

Conductor cross section flexible min.0.2 mm²

No. of ports1

DesignationPROFIBUS standardization

ECLASS 7.027242610

ECLASS 5.127242200

UNSPSC 13.232151602

UNSPSC 21.032151602

Depth132 mm

Permissible humidity (storage/transport)5 % ... 95 % (non-condensing...

UL, CanadaCSA C22.2 No. 142

Conductor cross section solid max.2.5 mm²

Conductor cross section AWG min.24

China RoHSEnvironmentally Friendly Use...

ECLASS 5.027242200

ECLASS 9.027242610

UNSPSC 18.032151602

Ambient temperature (storage/transport)-20 °C ... 60 °C

Degree of protectionIP20

Supply voltage range10.8 V DC ... 26.4 V DC

Conductor cross section AWG max.12

Interface10/100 Mbps Ethernet

Connection methodRJ45

ECLASS 6.027242600

ETIM 7.0EC001600

Width25 mm

UNSPSC 20.032151602

Interface 1Ethernet

ECLASS 11.027242610

ETIM 6.0EC001600

Max. permissible relative humidity (operation)-

Nominal power consumption-

Mains buffering time-

Protective circuit/component-

Feedback voltage resistance-

Output power-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class-

Input voltage range-

Inrush current-

Type of protection-

Installation distance top/bottom-

Nominal input voltage range-

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallel-

Residual ripple-

Control deviation-

Efficiency-

Standard – Safety extra-low voltage-

Discharge in air-

Comments-

Surge voltage load (surge)-

Voltage dips-

UNSPSC 11-

Installation distance right/left-

Degree of pollution-

Current consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Nominal output voltage-

Connection in series-

Protection class-

Assembly instructions-

Screw thread-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic compatibility-

Contact discharge-

Input-

Criterion A-

ECLASS 4.0-

ETIM 3.0-

UNSPSC 12.01-

MTBF (IEC 61709, SN 29500)-

Foot latch material-

Mounting position-

EMC requirements for noise immunity-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSA-

Fast transients (burst)-

Electromagnetic HF field-

Output-

UNSPSC 7.0901-

Derating-

Typical response time-

Housing material-

EMC requirements for noise emission-

Standard - Safe isolation-

Criterion B-

ECLASS 4.1-

ETIM 4.0-

Power loss nominal load max.-

Stripping length-

Low Voltage Directive-

Test field strength-

Voltage-

Conducted interference-

UNSPSC 6.01-

Insulation voltage input/output-

Standard - Electrical safety-

Frequency range-

Protection against overvoltage at the output (OVP)-

Maximum power dissipation in no-load condition-

Mains variation/undervoltage-

UL approvals-

Electrostatic discharge-

Width with alternative assembly-

AC frequency range-

Environmental protection directive-

Flicker-

I/O/S-

Dynamic Boost (IDyn.Boost)-

Selective Fuse Breaking (ISFB)-

Standard - safety for equipment for measurement, control, and laboratory use-

SIQ-

DNV GL noise radiation-

Attenuated sinusoidal oscillations (ring wave)-

Test level 4-

Attenuated oscillating wave-

REACh SVHC-

Depth with alternative assembly-

Installation height-

Shipbuilding approval-

Harmonic currents-

Voltage dip-

Test level 1-

Test level 5-

Input, output (test level 2)-

Signals (test level 2)-

Height with alternative assembly-

Discharge current to PE-

Static Boost (IStat.Boost)-

Insulation voltage input / PE-

EMC requirements, power plant-

Standard - power supply devices for low voltage with DC output-

Conducted noise emission-

DNV GL conducted interference-

Pulse-shape magnetic field-

Asymmetrical conducted disturbance variables-

Test level 6-

Signals (test level 1)-

Ambient temperature (start-up type tested)-

Setting range of the output voltage (USet)-

Insulation voltage output / PE-

HART FSK Physical Layer Test Specification Compliance-

Rail applications-

Noise emission-

Additional text-

Signal-

Frequency-

Number of periods-

Test level 3-

Input, output (test level 3)-

Power frequency magnetic field-

Damped oscillating magnetic field-

Test level 2-

Input, output (test level 1)-

Criterion C-

Height90 mm

Net weight0.34 kg

Conductor cross section flexible max.2.5 mm²

Permissible humidity (operation)-

UL, USA/Canada-

Conductor cross section solid min.0.2 mm²

Standards/regulations-

ECLASS 10.0.127040701

UNSPSC 19.039121004

Ambient temperature (operation)-25 °C ... 70 °C (> 55 °C De...

Mounting type-

Color-

Max. current consumption-

Conductor cross section flexible min.0.2 mm²

No. of ports-

Designation-

ECLASS 7.027049002

ECLASS 5.127049000

UNSPSC 13.239121004

UNSPSC 21.039121004

Depth84 mm

Permissible humidity (storage/transport)-

UL, Canada-

Conductor cross section solid max.2.5 mm²

Conductor cross section AWG min.24

China RoHSEnvironmentally Friendly Use...

ECLASS 5.027049000

ECLASS 9.027040701

UNSPSC 18.039121004

Ambient temperature (storage/transport)-40 °C ... 85 °C

Degree of protectionIP20

Supply voltage range-

Conductor cross section AWG max.14

Interface-

Connection methodScrew connection

ECLASS 6.027049000

ETIM 7.0EC002540

Width55 mm

UNSPSC 20.039121004

Interface 1-

ECLASS 11.027040701

ETIM 6.0EC002540

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Nominal power consumption206.3 VA

Mains buffering time> 20 ms (120 V AC)

Protective circuit/componentVaristor

Feedback voltage resistance< 25 V DC

Output power100 W

Inflammability class in acc. with UL 94 (housing / terminal blocks)V0

Climatic class3K3 (in acc. with EN 60721)

Input voltage range85 V AC ... 264 V AC

Inrush current< 30 A (typical)

Type of protectionTransient surge protection

Installation distance top/bottom30 mm / 30 mm

Nominal input voltage range100 V AC ... 240 V AC

Frequency range (fN)50 Hz ... 60 Hz 10 %

Input fuse4 A (slow-blow, internal)

Power factor (cos phi)0.54

Connection in parallelYes, for redundancy and incr...

Residual ripple< 75 mVPP (with nominal valu...

Control deviation< 1 % (change in load, stati...

Efficiencytyp. 89 % (120 V AC)

Standard – Safety extra-low voltageIEC 62368-1 (SELV) und EN 60...

Discharge in air8 kV (Test Level 3)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dipsEN 61000-4-11

UNSPSC 1139121004

Installation distance right/left0 mm / 0 mm

Degree of pollution2

Current consumption2.19 A (100 V AC)

Recommended breaker for input protection6 A ... 16 A (Characteristic...

Nominal output current (IN)6.67 A (-25 °C ... 55 °C)

Nominal output voltage15 V DC ±1 %

Connection in seriesyes

Protection classII (in closed control cabine...

Assembly instructionsalignable: 0 mm horizontally...

Screw threadM3

Standard - Safety of transformersEN 61558-2-16

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directi...

Contact discharge6 kV (Test Level 3)

Input2 kV (Test Level 3 - symmetr...

Criterion ANormal operating behavior wi...

ECLASS 4.027040700

ETIM 3.0EC001039

UNSPSC 12.0139121004

MTBF (IEC 61709, SN 29500)> 727000 h (40 °C)

Foot latch materialPOM (Polyoxymethylen)

Mounting positionhorizontal DIN rail NS 35, E...

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 2 - symmetr...

UNSPSC 7.090139121004

Derating55 °C ... 70 °C (2.5%/K)

Typical response time< 1 s

Housing materialPolycarbonate

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationDIN VDE 0100-410

Criterion BTemporary impairment to oper...

ECLASS 4.127040700

ETIM 4.0EC000599

Power loss nominal load max.< 12 W

Stripping length8 mm

Low Voltage DirectiveConformance with Low Voltage...

Test field strength10 V/m

Voltage10 V (Test Level 3)

Conducted interferenceEN 61000-4-6

UNSPSC 6.0130211502

Insulation voltage input/output4 kV AC (type test)

Standard - Electrical safetyIEC 62368-1/VDE 0805 (SELV)

Frequency range10 kHz ... 80 MHz

Protection against overvoltage at the output (OVP)≤ 25 V DC

Maximum power dissipation in no-load condition< 0.4 W

Mains variation/undervoltageEN 61000-4-11

UL approvalsUL/C-UL listed UL 508

Electrostatic dischargeEN 61000-4-2

Width with alternative assembly-

AC frequency range-

Environmental protection directive-

Flicker-

I/O/S-

Dynamic Boost (IDyn.Boost)-

Selective Fuse Breaking (ISFB)-

Standard - safety for equipment for measurement, control, and laboratory use-

SIQ-

DNV GL noise radiation-

Attenuated sinusoidal oscillations (ring wave)-

Test level 4-

Attenuated oscillating wave-

REACh SVHC-

Depth with alternative assembly-

Installation height-

Shipbuilding approval-

Harmonic currents-

Voltage dip-

Test level 1-

Test level 5-

Input, output (test level 2)-

Signals (test level 2)-

Height with alternative assembly-

Discharge current to PE-

Static Boost (IStat.Boost)-

Insulation voltage input / PE-

EMC requirements, power plant-

Standard - power supply devices for low voltage with DC output-

Conducted noise emission-

DNV GL conducted interference-

Pulse-shape magnetic field-

Asymmetrical conducted disturbance variables-

Test level 6-

Signals (test level 1)-

Ambient temperature (start-up type tested)-

Setting range of the output voltage (USet)-

Insulation voltage output / PE-

HART FSK Physical Layer Test Specification Compliance-

Rail applications-

Noise emission-

Additional text-

Signal-

Frequency-

Number of periods-

Test level 3-

Input, output (test level 3)-

Power frequency magnetic field-

Damped oscillating magnetic field-

Test level 2-

Input, output (test level 1)-

Criterion C-

Height130 mm

Net weight1.1 kg

Conductor cross section flexible max.1.5 mm²

Permissible humidity (operation)-

UL, USA/Canada-

Conductor cross section solid min.0.2 mm²

Standards/regulations-

ECLASS 10.0.127040701

UNSPSC 19.039121004

Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C De...

Mounting type-

Color-

Max. current consumption-

Conductor cross section flexible min.0.2 mm²

No. of ports-

Designation-

ECLASS 7.027049002

ECLASS 5.127242200

UNSPSC 13.239121004

UNSPSC 21.039121004

Depth125 mm

Permissible humidity (storage/transport)-

UL, Canada-

Conductor cross section solid max.1 mm²

Conductor cross section AWG min.24

China RoHSEnvironmentally Friendly Use...

ECLASS 5.027242200

ECLASS 9.027040701

UNSPSC 18.039121004

Ambient temperature (storage/transport)-40 °C ... 85 °C

Degree of protectionIP20

Supply voltage range-

Conductor cross section AWG max.16

Interface-

Connection methodPush-in connection

ECLASS 6.027049000

ETIM 7.0EC002540

Width70 mm

UNSPSC 20.039121004

Interface 1-

ECLASS 11.027040701

ETIM 6.0EC002540

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Nominal power consumption541 VA

Mains buffering timetyp. 33 ms (3x 400 V AC)

Protective circuit/componentVaristor, gas-filled surge a...

Feedback voltage resistance≤ 35 V DC

Output power480 W

Inflammability class in acc. with UL 94 (housing / terminal blocks)V0

Climatic class3K3 (in acc. with EN 60721)

Input voltage range3x 400 V AC ... 500 V AC -20...

Inrush currenttyp. 2 A (at 25 °C)

Type of protectionTransient surge protection

Installation distance top/bottom50 mm / 50 mm

Nominal input voltage range3x 400 V AC ... 500 V AC

Frequency range (fN)50 Hz ... 60 Hz -10 % ... +1...

Input fuse-

Power factor (cos phi)0.94

Connection in parallelYes, for redundancy and incr...

Residual ripple< 60 mVPP (with nominal valu...

Control deviation< 0.5 % (Static load change ...

Efficiencytyp. 93.9 % (400 V AC)

Standard – Safety extra-low voltageIEC 61010-1 (SELV)

Discharge in air15 kV (Test Level 4)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dipsEN 61000-4-11

UNSPSC 11-

Installation distance right/left5 mm / 5 mm

Degree of pollution2

Current consumption3x 0.99 A (400 V AC)

Recommended breaker for input protection3x 4 A ... 20 A (Characteris...

Nominal output current (IN)20 A

Nominal output voltage24 V DC

Connection in seriesyes

Protection classI

Assembly instructionsalignable: PN ≥50%, 5 mm hor...

Screw thread-

Standard - Safety of transformersIEC 61558-2-16 pending

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directi...

Contact discharge8 kV (Test Level 4)

Input2 kV (Test Level 4 - symmetr...

Criterion ANormal operating behavior wi...

ECLASS 4.0-

ETIM 3.0-

UNSPSC 12.01-

MTBF (IEC 61709, SN 29500)> 985000 h (25 °C)

Foot latch material-

Mounting positionhorizontal DIN rail NS 35, E...

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 3 - symmetr...

UNSPSC 7.0901-

Derating> 60 °C ... 70 °C (2.5%/K)

Typical response time300 ms (from SLEEP MODE)

Housing material-

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationIEC 61558-2-16 pending

Criterion BTemporary impairment to oper...

ECLASS 4.1-

ETIM 4.0-

Power loss nominal load max.< 32 W (400 V AC)

Stripping length8 mm

Low Voltage DirectiveConformance with Low Voltage...

Test field strength110 A/m

Voltage2.5 kV

Conducted interferenceEN 61000-4-6

UNSPSC 6.01-

Insulation voltage input/output4 kV AC (type test)

Standard - Electrical safetyIEC 61010-2-201 (SELV)

Frequency range50 Hz ... 60 Hz

Protection against overvoltage at the output (OVP)≤ 32 V DC

Maximum power dissipation in no-load condition< 7 W (400 V AC)

Mains variation/undervoltageSEMI F47-0706, EN 61000-4-11

UL approvalsUL Listed UL 508

Electrostatic dischargeEN 61000-4-2

Width with alternative assembly122 mm

AC frequency range50 Hz ... 60 Hz -10 % ... +1...

Environmental protection directiveRoHS Directive 2011/65/EU

FlickerEN 61000-3-3

I/O/Sasymmetrical

Dynamic Boost (IDyn.Boost)30 A (5 s)

Selective Fuse Breaking (ISFB)120 A (15 ms)

Standard - safety for equipment for measurement, control, and laboratory useIEC 61010-1

SIQBG (type approved)

DNV GL noise radiationClass B

Attenuated sinusoidal oscillations (ring wave)EN 61000-4-12

Test level 415 kHz 150 kHz (Test Level 4...

Attenuated oscillating waveEN 61000-4-18

REACh SVHCLead 7439-92-1

Depth with alternative assembly73 mm

Installation height≤ 5000 m (> 2000 m, observe ...

Shipbuilding approvalDNV GL, PRS, BV, LR, ABS

Harmonic currentsEN 61000-3-2

Voltage dip0 %

Test level 115 Hz 150 Hz (Test Level 4)

Test level 516.7 Hz 50 Hz 60 Hz (Test Le...

Input, output (test level 2)10 MHz

Signals (test level 2)100 kHz 1 MHz (Test Level 3 ...

Height with alternative assembly130 mm

Discharge current to PE< 3.5 mA

Static Boost (IStat.Boost)25 A

Insulation voltage input / PE3.5 kV AC (type test)

EMC requirements, power plantIEC 61850-3

Standard - power supply devices for low voltage with DC outputEN 61204-3

Conducted noise emissionEN 55016

DNV GL conducted interferenceClass A

Pulse-shape magnetic fieldEN 61000-4-9

Asymmetrical conducted disturbance variablesEN 61000-4-16

Test level 616.7 Hz 50 Hz 60 Hz (Test Le...

Signals (test level 1)100 kHz 1 MHz (Test Level 3 ...

Ambient temperature (start-up type tested)-40 °C

Setting range of the output voltage (USet)24 V DC ... 29.5 V DC (const...

Insulation voltage output / PE0.5 kV DC (type test)

HART FSK Physical Layer Test Specification ComplianceOutput voltage UOut complian...

Rail applicationsEN 50121-3-2

Noise emissionEN 55016

Additional textTest Level 2

Signal1 kV (Test Level 2 - asymmet...

Frequency50 Hz

Number of periods0,5 / 1 / 5 / 50 / 250 perio...

Test level 31.5 kHz 15 kHz (Test Level 4...

Input, output (test level 3)100 kHz 1 MHz (Test Level 3 ...

Power frequency magnetic fieldEN 61000-4-8

Damped oscillating magnetic fieldEN 61000-4-10

Test level 2150 Hz 1.5 kHz (Test Level 4...

Input, output (test level 1)100 kHz 1 MHz (Test Level 3 ...

Criterion CTemporary adverse effects on...

Height100 mm

Net weight222 g

Conductor cross section flexible max.2.5 mm²

Permissible humidity (operation)5 % ... 95 % (non-condensing...

UL, USA/CanadaUL 508 Listed

Conductor cross section solid min.0.2 mm²

Standards/regulationsIEC 61158-2

ECLASS 10.0.127242610

UNSPSC 19.032151602

Ambient temperature (operation)-20 °C ... 60 °C

Mounting typeDIN rail: 35 mm

Colorgreen

Max. current consumption800 mA

Conductor cross section flexible min.0.2 mm²

No. of ports1

DesignationPROFIBUS standardization

ECLASS 7.027242610

ECLASS 5.127242200

UNSPSC 13.232151602

UNSPSC 21.032151602

Depth132 mm

Permissible humidity (storage/transport)5 % ... 95 % (non-condensing...

UL, CanadaCSA C22.2 No. 142

Conductor cross section solid max.2.5 mm²

Conductor cross section AWG min.24

China RoHSEnvironmentally Friendly Use...

ECLASS 5.027242200

ECLASS 9.027242610

UNSPSC 18.032151602

Ambient temperature (storage/transport)-20 °C ... 60 °C

Degree of protectionIP20

Supply voltage range10.8 V DC ... 26.4 V DC

Conductor cross section AWG max.12

Interface10/100 Mbps Ethernet

Connection methodRJ45

ECLASS 6.027242600

ETIM 7.0EC001600

Width25 mm

UNSPSC 20.032151602

Interface 1Ethernet

ECLASS 11.027242610

ETIM 6.0EC001600

Max. permissible relative humidity (operation)-

Nominal power consumption-

Mains buffering time-

Protective circuit/component-

Feedback voltage resistance-

Output power-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class-

Input voltage range-

Inrush current-

Type of protection-

Installation distance top/bottom-

Nominal input voltage range-

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallel-

Residual ripple-

Control deviation-

Efficiency-

Standard – Safety extra-low voltage-

Discharge in air-

Comments-

Surge voltage load (surge)-

Voltage dips-

UNSPSC 11-

Installation distance right/left-

Degree of pollution-

Current consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Nominal output voltage-

Connection in series-

Protection class-

Assembly instructions-

Screw thread-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic compatibility-

Contact discharge-

Input-

Criterion A-

ECLASS 4.0-

ETIM 3.0-

UNSPSC 12.01-

MTBF (IEC 61709, SN 29500)-

Foot latch material-

Mounting position-

EMC requirements for noise immunity-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSA-

Fast transients (burst)-

Electromagnetic HF field-

Output-

UNSPSC 7.0901-

Derating-

Typical response time-

Housing material-

EMC requirements for noise emission-

Standard - Safe isolation-

Criterion B-

ECLASS 4.1-

ETIM 4.0-

Power loss nominal load max.-

Stripping length-

Low Voltage Directive-

Test field strength-

Voltage-

Conducted interference-

UNSPSC 6.01-

Insulation voltage input/output-

Standard - Electrical safety-

Frequency range-

Protection against overvoltage at the output (OVP)-

Maximum power dissipation in no-load condition-

Mains variation/undervoltage-

UL approvals-

Electrostatic discharge-

Width with alternative assembly-

AC frequency range-

Environmental protection directive-

Flicker-

I/O/S-

Dynamic Boost (IDyn.Boost)-

Selective Fuse Breaking (ISFB)-

Standard - safety for equipment for measurement, control, and laboratory use-

SIQ-

DNV GL noise radiation-

Attenuated sinusoidal oscillations (ring wave)-

Test level 4-

Attenuated oscillating wave-

REACh SVHC-

Depth with alternative assembly-

Installation height-

Shipbuilding approval-

Harmonic currents-

Voltage dip-

Test level 1-

Test level 5-

Input, output (test level 2)-

Signals (test level 2)-

Height with alternative assembly-

Discharge current to PE-

Static Boost (IStat.Boost)-

Insulation voltage input / PE-

EMC requirements, power plant-

Standard - power supply devices for low voltage with DC output-

Conducted noise emission-

DNV GL conducted interference-

Pulse-shape magnetic field-

Asymmetrical conducted disturbance variables-

Test level 6-

Signals (test level 1)-

Ambient temperature (start-up type tested)-

Setting range of the output voltage (USet)-

Insulation voltage output / PE-

HART FSK Physical Layer Test Specification Compliance-

Rail applications-

Noise emission-

Additional text-

Signal-

Frequency-

Number of periods-

Test level 3-

Input, output (test level 3)-

Power frequency magnetic field-

Damped oscillating magnetic field-

Test level 2-

Input, output (test level 1)-

Criterion C-