2903687 Phoenix Contact Control Relays

Product Details

• Rated surge voltage
  2.5 kV
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Mains frequency
  50/60 Hz
• Status display
  Yellow LED
• Min. switching current
  5 mA (at 24 V)
• Mechanical service life
  approx. 2x 107 cycles
• Connection in acc. with standard
  CSA
• Ambient temperature (operation)
  -40 °C ... 55 °C
• Typical response time
  5 ms ... 15 ms (depending on phase relation)
• Type of switch contact
  Single contact
• Contact material
  AgNi
• Switching capacity
  2 A (at 24 V, DC13)
• Operating mode
  100% operating factor
• Insulation
  Basic insulation
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 10.0.1
  27371601
• ECLASS 7.0
  27371601
• UNSPSC 7.0901
  39121515
• UNSPSC 19.0
  39122334
• Nominal input voltage UN
  120 V AC
Minimum switching voltage
5 V (At 24 mA)
Interrupting rating (ohmic load) max.
144 W (at 24 V DC)
Connection method
Plug connection
Rated insulation voltage
250 V AC
Overvoltage category
II
ECLASS 11.0
27371601
ETIM 7.0
EC001437
UNSPSC 11
39121515
UNSPSC 20.0
39122334
Typical release time range
5 ms ... 20 ms (depending on phase relation)
Maximum inrush current
16 A (20 ms, N/O contacts)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Standards/regulations
IEC 60664
Mounting position
any
ECLASS 4.0
27371100
ECLASS 5.0
27371600
ETIM 6.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 21.0
39122334
Power dissipation for nominal condition
1.56 W
Maximum switching voltage
250 V AC/DC
Limiting continuous current
6 A
Switching capacity min.
0.12 W
Service life, electrical
see diagram
Pollution degree
2
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.1
27371100
ECLASS 6.0
27371600
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
ETIM 3.0
EC001437
ECLASS 5.1
27371600
UNSPSC 12.01
39121515
UNSPSC 18.0
39122334
Depth
35.6 mm
Input voltage range in reference to UN
see diagram
Designation
Corrosive gas test
Height
27.5 mm
Degree of protection
RT I
Typical input current at UN
13 mA
Motor load according to UL 508
1/3 HP, 240 V AC
ETIM 2.0
EC001437
Width
21.2 mm
Contact type
4 changeover contacts
ECLASS 9.0
27371601