1424661 Phoenix Contact Electrical Wires & Cables

Product Details

• Stripping length of the sheath
  31 mm
• Rated current at 40°C
  4 A (2 A when using 0.14 mm² conductors)
• Status display
  No
• Connection method
  Push-in connection
• Assembly instructions
  The connector pin assignment can be rotated 45° to the cable outlet
• Contact material
  CuSn
• Material of grip body
  Zinc die-cast, nickel-plated
• ECLASS 10.0.1
  27440102
• Conductor cross section
  0.14 mm² ... 0.75 mm² (without ferrule)
• Contact surface material
  Ni/Au
• Material, knurls
  Zinc die-cast, nickel-plated
• ECLASS 11.0
  27440102
• ETIM 7.0
  EC002635
• External cable diameter
  4 mm ... 8 mm
• Stripping length of the individual wire
  7 mm
• Number of positions
  5
• Signal type/category
  Universal
• Degree of pollution
  3
• Torque
  0.4 Nm (M12 knurl)
• Contact carrier material
  PA 6.6
Diameter housing
19 mm
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Note
NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Overvoltage category
II
Standards/regulations
acc. to DIN EN 45545-2
Conductor cross section AWG
26 ... 18 (without ferrule)
Sealing material
NBR
Standards/specifications
M12 connector IEC 61076-2-101
ECLASS 9.0
27440102
Length
48 mm
Rated voltage
48 V AC
Degree of protection
IP65
Insulation resistance
≥ 100 MΩ
Coding
A - standard
Insertion/withdrawal cycles
≥ 100
Flammability rating according to UL 94
V0
Additional material specifications
TPE-U (Clamping cage, weight: 1.1 g)
ETIM 6.0
EC002635
ECLASS 7.0
27440104
ECLASS 5.1
27143423
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27279200