2903374 Phoenix Contact Control Relays

Product Details

• Depth
  82 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 60 °C
• Typical input current at UN
  9 mA
• Coil voltage
  24 V DC
• Type of switch contact
  Single contact
• Maximum switching voltage
  250 V AC/DC
• Limiting continuous current
  6 A
• Switching capacity
  2 A (24 V (DC13))
• Mechanical service life
  approx. 2x 107 cycles
• Assembly instructions
  In rows with zero spacing
• Connection name
  Contact side
• Conductor cross section flexible (2 conductors with same cross section)
  0.5 mm² ... 1.5 mm²
• Conductor cross section AWG
  20 ... 12 (solid)
• Pollution degree
  2
• Overvoltage category
  III
• REACh SVHC
  Lead 7439-92-1
• ECLASS 4.0
  27371100
• ECLASS 5.1
  27371600
ECLASS 6.0
27371600
Height
84 mm
Input voltage range in reference to UN
see diagram
Nominal input voltage UN
24 V DC
Typical release time
8 ms
Power dissipation for nominal condition
0.22 W
Contact material
AgSnO
Minimum switching voltage
5 V (at 100 mA)
Maximum inrush current
10 A (4 s)
Operating mode
100% operating factor
Flammability rating according to UL 94
V2 (Housing)
Service life, electrical
see diagram
Stripping length
7 mm
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 1.5 mm²
Standards/regulations
DIN EN 50178
Insulation
safe isolation
China RoHS
Environmentally Friendly Use Period = 50 years
Designation
Corrosive gas test
ECLASS 10.0.1
27371601
ECLASS 4.1
27371100
ECLASS 7.0
27371601
Width
6.2 mm
Degree of protection
IP20 (Relay base)
Typical response time
5 ms
Protective circuit
Damping diode
Operating voltage display
Yellow LED
Contact type
1 changeover contact
Min. switching current
10 mA (at 12 V)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Connection method
Screw connection
Conductor cross section solid
0.5 mm² ... 4 mm²
Conductor cross section flexible
0.5 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Rated insulation voltage
250 V AC
Rated surge voltage
6 kV
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ECLASS 5.0
27371600
ECLASS 9.0
27371601
ETIM 2.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 11
39121516
UNSPSC 18.0
39122334
UNSPSC 20.0
39122334
ETIM 6.0
EC001437
ETIM 4.0
EC001437
UNSPSC 6.01
30211917
UNSPSC 13.2
39122334
ETIM 7.0
EC001437
ETIM 3.0
EC001437
UNSPSC 12.01
39121516
UNSPSC 19.0
39122334
UNSPSC 21.0
39122334