2903341 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Mains frequency
  50/60 Hz
• Coil voltage
  24 V AC
• Operating voltage display
  Yellow LED
• Type of switch contact
  Single contact
• Maximum inrush current
  25 A (20 ms, N/O contacts)
• Flammability rating according to UL 94
  V2 (Housing)
• Stripping length
  8 mm
• Conductor cross section AWG
  26 ... 16 (solid)
• Overvoltage category
  III
• ECLASS 11.0
  27371601
• ECLASS 5.0
  27371600
• ETIM 3.0
  EC001437
• UNSPSC 6.01
  30211917
• UNSPSC 19.0
  39122334
• Height
  93 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Protective circuit
  Varistor
• Maximum switching voltage
  250 V AC/DC
Min. switching current
10 mA (at 12 V)
Operating mode
100% operating factor
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Standards/regulations
DIN EN 50178
Rated surge voltage
6 kV
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27371600
ETIM 2.0
EC001437
UNSPSC 7.0901
39121516
Input voltage range in reference to UN
see diagram
Power dissipation for nominal condition
0.79 W
Minimum switching voltage
12 V (at 10 mA)
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
approx. 107 cycles
Assembly instructions
In rows with zero spacing
Rated insulation voltage
250 V AC
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
ETIM 6.0
EC001437
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Type of note
Notes on operation
Depth
75 mm
Degree of protection
IP20 (Relay base)
Nominal input voltage UN
24 V AC
Typical release time range
3 ms ... 20 ms
Typical response time
3 ms ... 12 ms
Contact material
AgNi
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Connection name
Contact side
Mounting position
any
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.0
27371100
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334
Note
FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
Width
16 mm
Typical input current at UN
33 mA
Contact type
1 changeover contact
Limiting continuous current
10 A (see diagram)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Service life, electrical
see diagram
Connection method
Push-in connection
Insulation
safe isolation
Designation
Corrosive gas test
ECLASS 4.1
27371100
ECLASS 6.0
27371600
ETIM 4.0
EC001437
UNSPSC 11
39121516
UNSPSC 12.01
39121516