2903326 Phoenix Contact Control Relays

Product Details

• Width
  27 mm
• Ambient temperature (operation)
  -40 °C ... 60 °C
• ECLASS 9.0
  27371601
• UNSPSC 11
  39121515
• Depth
  75 mm
• Input voltage range in reference to UN
  see diagram
• Typical release time
  14 ms
• Contact material
  AgNi
• Minimum switching voltage
  5 V (At 24 mA)
• Maximum inrush current
  30 A (20 ms, N/O contacts)
• Flammability rating according to UL 94
  V2 (Housing)
• Assembly instructions
  In rows with zero spacing
• Conductor cross section flexible
  0.5 mm² ... 4 mm²
• Conductor cross section AWG
  20 ... 10 (solid)
• Insulation
  Basic insulation
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 4.1
  27371100
• ECLASS 10.0.1
  27371601
• ETIM 2.0
  EC001437
• ETIM 7.0
  EC001437
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334
Height
89 mm
Degree of protection
IP20 (Relay base)
Typical input current at UN
42 mA
Protective circuit
Damping diode
Type of switch contact
Single contact
Maximum switching voltage
250 V AC/DC
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
approx. 2x 107 cycles
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Stripping length
8 mm
Torque
0.5 Nm ... 0.6 Nm
Pollution degree
2 (Rated voltage of 230/400 V)
ECLASS 4.0
27371100
ECLASS 6.0
27371600
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical response time
13 ms
Power dissipation for nominal condition
1.01 W
Limiting continuous current
10 A (see diagram)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Connection name
Contact side
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Standards/regulations
DIN EN 50178
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334
Nominal input voltage UN
24 V DC
Coil voltage
24 V DC
Contact type
2 changeover contacts
Operating voltage display
Yellow LED
Min. switching current
5 mA (at 24 V)
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Operating mode
100% operating factor
Conductor cross section solid
0.5 mm² ... 4 mm²
Connection method
Screw connection
Rated surge voltage
4 kV
Overvoltage category
III
Designation
Corrosive gas test
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334