1688858 Phoenix Contact Data & Networking Devices

Weight-

ECLASS 4.027040700

Overvoltage category-

Height130 mm

Contact material-

Number of positions-

ECLASS 9.027040701

Rated current-

Connection methodScrew connection

Housing materialSteel sheet, zinc-plated

Test voltage-

ECLASS 11.027040701

ECLASS 5.127242200

ETIM 3.0EC001039

Safety note-

ETIM 2.0-

Degree of pollution2

Flammability rating according to UL 94-

Length-

ECLASS 4.127040700

ETIM 7.0EC002540

UNSPSC 20.039121004

Mounting type-

Contact carrier material-

China RoHSEnvironmentally Friendly Use...

ECLASS 5.027242200

ETIM 6.0EC002540

UNSPSC 21.039121004

ECLASS 7.027049002

Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C De...

Width96 mm

Rated voltage (III/3)-

ECLASS 10.0.127040701

UNSPSC 6.0130211502

UNSPSC 13.239121004

ECLASS 6.027049000

UNSPSC 12.0139121004

UNSPSC 19.039121004

UNSPSC 18.039121004

ETIM 4.0EC002540

UNSPSC 7.090139121004

UNSPSC 1139121004

Degree of protectionIP20

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Nominal power consumption1386 VA

Mains buffering timetyp. 25 ms (400 V AC)

Protective circuit/componentVaristor

Feedback voltage resistancemax. 60 V DC

Output power960 W

Depth179 mm

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class3K3 (in acc. with EN 60721)

Input voltage range3x 320 V AC ... 575 V AC

Inrush current< 20 A (typical)

Type of protectionTransient surge protection

Installation distance top/bottom-

Ambient temperature (storage/transport)-40 °C ... 85 °C

Nominal input voltage range3x 400 V AC ... 500 V AC

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallelYes, for redundancy and incr...

Residual ripple< 50 mVPP (with nominal valu...

Control deviation< 1 % (change in load, stati...

Efficiency> 93 % (at 400 V AC and nomi...

Standard – Safety extra-low voltageIEC 60950-1 (SELV) and EN 60...

Discharge in air15 kV (Test Level 4)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dips-

Installation distance right/left-

Current consumption3x 2.1 A (400 V AC)

Recommended breaker for input protection6 A ... 16 A (AC: Characteri...

Nominal output current (IN)20 A (-25 °C ... 60 °C, UOUT...

Nominal output voltage48 V DC ±1 %

Connection in seriesyes

Net weight2.5 kg

Protection classI

Assembly instructionsalignable: PN ≥50%, 5 mm hor...

Conductor cross section AWG min.18

Screw threadM3

Standard - Safety of transformersIEC 61558-2-17

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directi...

Contact discharge8 kV (Test Level 4)

Input2 kV (Test Level 3 - symmetr...

Criterion ANormal operating behavior wi...

MTBF (IEC 61709, SN 29500)> 890000 h (25 °C)

Foot latch material-

Mounting positionhorizontal DIN rail NS 35, E...

Conductor cross section flexible max.4 mm²

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 2 - symmetr...

Derating60 °C ... 70 °C (2.5%/K)

Typical response time< 1 s

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationDIN VDE 0100-410

Criterion BTemporary impairment to oper...

Power loss nominal load max.70 W

Conductor cross section solid min.0.2 mm²

Stripping length10 mm

Low Voltage DirectiveConformance with Low Voltage...

Test field strength10 V/m (Test Level 3)

Voltage10 V (Test Level 3)

Conducted interferenceEN 61000-4-6

Insulation voltage input/output4 kV AC (type test)

Conductor cross section flexible min.0.2 mm²

Standard - Electrical safetyIEC 60950-1/VDE 0805 (SELV)

Frequency range0.15 MHz ... 80 MHz

Protection against overvoltage at the output (OVP)< 60 V DC

Maximum power dissipation in no-load condition24 W

Conductor cross section solid max.6 mm²

Conductor cross section AWG max.10

Mains variation/undervoltage-

UL approvalsUL Listed UL 508

Electrostatic dischargeEN 61000-4-2

Ambient temperature (start-up type tested)-40 °C

Discharge current to PE< 3.5 mA

Insulation voltage output / PE500 V DC (routine test)

AC frequency range45 Hz ... 65 Hz

REACh SVHCLead 7439-92-1

POWER BOOST (IBoost)22.5 A (-25 °C ... 40 °C per...

Active current limitationApprox. IBOOST = 22.5 A (for...

Signal1 kV (Test Level 2 - asymmet...

Width with alternative assembly176 mm

Installation height4000 m

Selective Fuse Breaking (ISFB)100 A (12 ms)

Insulation voltage input / PE3.5 kV AC (type test)

Standard - Approval for medical useIEC 60601-1, 2 x MOOP

Height with alternative assembly130 mm

Setting range of the output voltage (USet)30 V DC ... 56 V DC (> 48 V ...

Standard - Equipment safetyBG (design tested)

Depth with alternative assembly99 mm

Frequency range DC0 Hz

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipmentEN 50178

Rail applicationsEN 50121-4

I/O/Sasymmetrical

Weight10.25 g

ECLASS 4.027260700

Overvoltage categoryIII

Height12.93 mm

Contact materialCopper alloy

Number of positions9

ECLASS 9.027440205

Rated current5 A (at 20 °C)

Connection methodCrimp connection

Housing materialSteel, tin-plated

Test voltage1500 V

ECLASS 11.027440223

ECLASS 5.127260700

ETIM 3.0EC000438

Safety noteWARNING: The connectors may ...

ETIM 2.0EC000438

Degree of pollution2

Flammability rating according to UL 94V0

Length31.2 mm

ECLASS 4.127260700

ETIM 7.0EC000438

UNSPSC 20.039121522

Mounting typeHole

Contact carrier materialGlass-fiber reinforced therm...

China RoHSEnvironmentally friendly use...

ECLASS 5.027260700

ETIM 6.0EC000438

UNSPSC 21.039121522

ECLASS 7.027440302

Ambient temperature (operation)-55 °C ... 130 °C

Width18 mm

Rated voltage (III/3)125 V

ECLASS 10.0.127440205

UNSPSC 6.0130211923

UNSPSC 13.239121522

ECLASS 6.027260700

UNSPSC 12.0139121522

UNSPSC 19.039121522

UNSPSC 18.039121522

ETIM 4.0EC000438

UNSPSC 7.090139121522

UNSPSC 1139121522

Degree of protection-

Max. permissible relative humidity (operation)-

Nominal power consumption-

Mains buffering time-

Protective circuit/component-

Feedback voltage resistance-

Output power-

Depth-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class-

Input voltage range-

Inrush current-

Type of protection-

Installation distance top/bottom-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallel-

Residual ripple-

Control deviation-

Efficiency-

Standard – Safety extra-low voltage-

Discharge in air-

Comments-

Surge voltage load (surge)-

Voltage dips-

Installation distance right/left-

Current consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Nominal output voltage-

Connection in series-

Net weight-

Protection class-

Assembly instructions-

Conductor cross section AWG min.-

Screw thread-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic compatibility-

Contact discharge-

Input-

Criterion A-

MTBF (IEC 61709, SN 29500)-

Foot latch material-

Mounting position-

Conductor cross section flexible max.-

EMC requirements for noise immunity-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSA-

Fast transients (burst)-

Electromagnetic HF field-

Output-

Derating-

Typical response time-

EMC requirements for noise emission-

Standard - Safe isolation-

Criterion B-

Power loss nominal load max.-

Conductor cross section solid min.-

Stripping length-

Low Voltage Directive-

Test field strength-

Voltage-

Conducted interference-

Insulation voltage input/output-

Conductor cross section flexible min.-

Standard - Electrical safety-

Frequency range-

Protection against overvoltage at the output (OVP)-

Maximum power dissipation in no-load condition-

Conductor cross section solid max.-

Conductor cross section AWG max.-

Mains variation/undervoltage-

UL approvals-

Electrostatic discharge-

Ambient temperature (start-up type tested)-

Discharge current to PE-

Insulation voltage output / PE-

AC frequency range-

REACh SVHC-

POWER BOOST (IBoost)-

Active current limitation-

Signal-

Width with alternative assembly-

Installation height-

Selective Fuse Breaking (ISFB)-

Insulation voltage input / PE-

Standard - Approval for medical use-

Height with alternative assembly-

Setting range of the output voltage (USet)-

Standard - Equipment safety-

Depth with alternative assembly-

Frequency range DC-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Rail applications-

I/O/S-

Weight-

ECLASS 4.027040700

Overvoltage category-

Height90 mm

Contact material-

Number of positions-

ECLASS 9.027040701

Rated current-

Connection methodScrew connection

Housing materialPolycarbonate

Test voltage-

ECLASS 11.027040701

ECLASS 5.127049000

ETIM 3.0EC001039

Safety note-

ETIM 2.0-

Degree of pollution2

Flammability rating according to UL 94-

Length-

ECLASS 4.127040700

ETIM 7.0EC002540

UNSPSC 20.039121004

Mounting type-

Contact carrier material-

China RoHSEnvironmentally Friendly Use...

ECLASS 5.027049000

ETIM 6.0EC002540

UNSPSC 21.039121004

ECLASS 7.027049002

Ambient temperature (operation)-25 °C ... 70 °C (> 55 °C De...

Width55 mm

Rated voltage (III/3)-

ECLASS 10.0.127040701

UNSPSC 6.0130211502

UNSPSC 13.239121004

ECLASS 6.027049000

UNSPSC 12.0139121004

UNSPSC 19.039121004

UNSPSC 18.039121004

ETIM 4.0EC000599

UNSPSC 7.090139121004

UNSPSC 1139121004

Degree of protectionIP20

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Nominal power consumption206.3 VA

Mains buffering time> 20 ms (120 V AC)

Protective circuit/componentVaristor

Feedback voltage resistance< 25 V DC

Output power100 W

Depth84 mm

Inflammability class in acc. with UL 94 (housing / terminal blocks)V0

Climatic class3K3 (in acc. with EN 60721)

Input voltage range85 V AC ... 264 V AC

Inrush current< 30 A (typical)

Type of protectionTransient surge protection

Installation distance top/bottom30 mm / 30 mm

Ambient temperature (storage/transport)-40 °C ... 85 °C

Nominal input voltage range100 V AC ... 240 V AC

Frequency range (fN)50 Hz ... 60 Hz 10 %

Input fuse4 A (slow-blow, internal)

Power factor (cos phi)0.54

Connection in parallelYes, for redundancy and incr...

Residual ripple< 75 mVPP (with nominal valu...

Control deviation< 1 % (change in load, stati...

Efficiencytyp. 89 % (120 V AC)

Standard – Safety extra-low voltageIEC 62368-1 (SELV) und EN 60...

Discharge in air8 kV (Test Level 3)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dipsEN 61000-4-11

Installation distance right/left0 mm / 0 mm

Current consumption2.19 A (100 V AC)

Recommended breaker for input protection6 A ... 16 A (Characteristic...

Nominal output current (IN)6.67 A (-25 °C ... 55 °C)

Nominal output voltage15 V DC ±1 %

Connection in seriesyes

Net weight0.34 kg

Protection classII (in closed control cabine...

Assembly instructionsalignable: 0 mm horizontally...

Conductor cross section AWG min.24

Screw threadM3

Standard - Safety of transformersEN 61558-2-16

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directi...

Contact discharge6 kV (Test Level 3)

Input2 kV (Test Level 3 - symmetr...

Criterion ANormal operating behavior wi...

MTBF (IEC 61709, SN 29500)> 727000 h (40 °C)

Foot latch materialPOM (Polyoxymethylen)

Mounting positionhorizontal DIN rail NS 35, E...

Conductor cross section flexible max.2.5 mm²

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 2 - symmetr...

Derating55 °C ... 70 °C (2.5%/K)

Typical response time< 1 s

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationDIN VDE 0100-410

Criterion BTemporary impairment to oper...

Power loss nominal load max.< 12 W

Conductor cross section solid min.0.2 mm²

Stripping length8 mm

Low Voltage DirectiveConformance with Low Voltage...

Test field strength10 V/m

Voltage10 V (Test Level 3)

Conducted interferenceEN 61000-4-6

Insulation voltage input/output4 kV AC (type test)

Conductor cross section flexible min.0.2 mm²

Standard - Electrical safetyIEC 62368-1/VDE 0805 (SELV)

Frequency range10 kHz ... 80 MHz

Protection against overvoltage at the output (OVP)≤ 25 V DC

Maximum power dissipation in no-load condition< 0.4 W

Conductor cross section solid max.2.5 mm²

Conductor cross section AWG max.14

Mains variation/undervoltageEN 61000-4-11

UL approvalsUL/C-UL listed UL 508

Electrostatic dischargeEN 61000-4-2

Ambient temperature (start-up type tested)-

Discharge current to PE-

Insulation voltage output / PE-

AC frequency range-

REACh SVHC-

POWER BOOST (IBoost)-

Active current limitation-

Signal-

Width with alternative assembly-

Installation height-

Selective Fuse Breaking (ISFB)-

Insulation voltage input / PE-

Standard - Approval for medical use-

Height with alternative assembly-

Setting range of the output voltage (USet)-

Standard - Equipment safety-

Depth with alternative assembly-

Frequency range DC-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Rail applications-

I/O/S-

Weight-

ECLASS 4.027040700

Overvoltage category-

Height130 mm

Contact material-

Number of positions-

ECLASS 9.027040701

Rated current-

Connection methodScrew connection

Housing materialSteel sheet, zinc-plated

Test voltage-

ECLASS 11.027040701

ECLASS 5.127242200

ETIM 3.0EC001039

Safety note-

ETIM 2.0-

Degree of pollution2

Flammability rating according to UL 94-

Length-

ECLASS 4.127040700

ETIM 7.0EC002540

UNSPSC 20.039121004

Mounting type-

Contact carrier material-

China RoHSEnvironmentally Friendly Use...

ECLASS 5.027242200

ETIM 6.0EC002540

UNSPSC 21.039121004

ECLASS 7.027049002

Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C De...

Width96 mm

Rated voltage (III/3)-

ECLASS 10.0.127040701

UNSPSC 6.0130211502

UNSPSC 13.239121004

ECLASS 6.027049000

UNSPSC 12.0139121004

UNSPSC 19.039121004

UNSPSC 18.039121004

ETIM 4.0EC002540

UNSPSC 7.090139121004

UNSPSC 1139121004

Degree of protectionIP20

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Nominal power consumption1386 VA

Mains buffering timetyp. 25 ms (400 V AC)

Protective circuit/componentVaristor

Feedback voltage resistancemax. 60 V DC

Output power960 W

Depth179 mm

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class3K3 (in acc. with EN 60721)

Input voltage range3x 320 V AC ... 575 V AC

Inrush current< 20 A (typical)

Type of protectionTransient surge protection

Installation distance top/bottom-

Ambient temperature (storage/transport)-40 °C ... 85 °C

Nominal input voltage range3x 400 V AC ... 500 V AC

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallelYes, for redundancy and incr...

Residual ripple< 50 mVPP (with nominal valu...

Control deviation< 1 % (change in load, stati...

Efficiency> 93 % (at 400 V AC and nomi...

Standard – Safety extra-low voltageIEC 60950-1 (SELV) and EN 60...

Discharge in air15 kV (Test Level 4)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dips-

Installation distance right/left-

Current consumption3x 2.1 A (400 V AC)

Recommended breaker for input protection6 A ... 16 A (AC: Characteri...

Nominal output current (IN)20 A (-25 °C ... 60 °C, UOUT...

Nominal output voltage48 V DC ±1 %

Connection in seriesyes

Net weight2.5 kg

Protection classI

Assembly instructionsalignable: PN ≥50%, 5 mm hor...

Conductor cross section AWG min.18

Screw threadM3

Standard - Safety of transformersIEC 61558-2-17

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directi...

Contact discharge8 kV (Test Level 4)

Input2 kV (Test Level 3 - symmetr...

Criterion ANormal operating behavior wi...

MTBF (IEC 61709, SN 29500)> 890000 h (25 °C)

Foot latch material-

Mounting positionhorizontal DIN rail NS 35, E...

Conductor cross section flexible max.4 mm²

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 2 - symmetr...

Derating60 °C ... 70 °C (2.5%/K)

Typical response time< 1 s

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationDIN VDE 0100-410

Criterion BTemporary impairment to oper...

Power loss nominal load max.70 W

Conductor cross section solid min.0.2 mm²

Stripping length10 mm

Low Voltage DirectiveConformance with Low Voltage...

Test field strength10 V/m (Test Level 3)

Voltage10 V (Test Level 3)

Conducted interferenceEN 61000-4-6

Insulation voltage input/output4 kV AC (type test)

Conductor cross section flexible min.0.2 mm²

Standard - Electrical safetyIEC 60950-1/VDE 0805 (SELV)

Frequency range0.15 MHz ... 80 MHz

Protection against overvoltage at the output (OVP)< 60 V DC

Maximum power dissipation in no-load condition24 W

Conductor cross section solid max.6 mm²

Conductor cross section AWG max.10

Mains variation/undervoltage-

UL approvalsUL Listed UL 508

Electrostatic dischargeEN 61000-4-2

Ambient temperature (start-up type tested)-40 °C

Discharge current to PE< 3.5 mA

Insulation voltage output / PE500 V DC (routine test)

AC frequency range45 Hz ... 65 Hz

REACh SVHCLead 7439-92-1

POWER BOOST (IBoost)22.5 A (-25 °C ... 40 °C per...

Active current limitationApprox. IBOOST = 22.5 A (for...

Signal1 kV (Test Level 2 - asymmet...

Width with alternative assembly176 mm

Installation height4000 m

Selective Fuse Breaking (ISFB)100 A (12 ms)

Insulation voltage input / PE3.5 kV AC (type test)

Standard - Approval for medical useIEC 60601-1, 2 x MOOP

Height with alternative assembly130 mm

Setting range of the output voltage (USet)30 V DC ... 56 V DC (> 48 V ...

Standard - Equipment safetyBG (design tested)

Depth with alternative assembly99 mm

Frequency range DC0 Hz

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipmentEN 50178

Rail applicationsEN 50121-4

I/O/Sasymmetrical

Weight10.25 g

ECLASS 4.027260700

Overvoltage categoryIII

Height12.93 mm

Contact materialCopper alloy

Number of positions9

ECLASS 9.027440205

Rated current5 A (at 20 °C)

Connection methodCrimp connection

Housing materialSteel, tin-plated

Test voltage1500 V

ECLASS 11.027440223

ECLASS 5.127260700

ETIM 3.0EC000438

Safety noteWARNING: The connectors may ...

ETIM 2.0EC000438

Degree of pollution2

Flammability rating according to UL 94V0

Length31.2 mm

ECLASS 4.127260700

ETIM 7.0EC000438

UNSPSC 20.039121522

Mounting typeHole

Contact carrier materialGlass-fiber reinforced therm...

China RoHSEnvironmentally friendly use...

ECLASS 5.027260700

ETIM 6.0EC000438

UNSPSC 21.039121522

ECLASS 7.027440302

Ambient temperature (operation)-55 °C ... 130 °C

Width18 mm

Rated voltage (III/3)125 V

ECLASS 10.0.127440205

UNSPSC 6.0130211923

UNSPSC 13.239121522

ECLASS 6.027260700

UNSPSC 12.0139121522

UNSPSC 19.039121522

UNSPSC 18.039121522

ETIM 4.0EC000438

UNSPSC 7.090139121522

UNSPSC 1139121522

Degree of protection-

Max. permissible relative humidity (operation)-

Nominal power consumption-

Mains buffering time-

Protective circuit/component-

Feedback voltage resistance-

Output power-

Depth-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class-

Input voltage range-

Inrush current-

Type of protection-

Installation distance top/bottom-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallel-

Residual ripple-

Control deviation-

Efficiency-

Standard – Safety extra-low voltage-

Discharge in air-

Comments-

Surge voltage load (surge)-

Voltage dips-

Installation distance right/left-

Current consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Nominal output voltage-

Connection in series-

Net weight-

Protection class-

Assembly instructions-

Conductor cross section AWG min.-

Screw thread-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic compatibility-

Contact discharge-

Input-

Criterion A-

MTBF (IEC 61709, SN 29500)-

Foot latch material-

Mounting position-

Conductor cross section flexible max.-

EMC requirements for noise immunity-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSA-

Fast transients (burst)-

Electromagnetic HF field-

Output-

Derating-

Typical response time-

EMC requirements for noise emission-

Standard - Safe isolation-

Criterion B-

Power loss nominal load max.-

Conductor cross section solid min.-

Stripping length-

Low Voltage Directive-

Test field strength-

Voltage-

Conducted interference-

Insulation voltage input/output-

Conductor cross section flexible min.-

Standard - Electrical safety-

Frequency range-

Protection against overvoltage at the output (OVP)-

Maximum power dissipation in no-load condition-

Conductor cross section solid max.-

Conductor cross section AWG max.-

Mains variation/undervoltage-

UL approvals-

Electrostatic discharge-

Ambient temperature (start-up type tested)-

Discharge current to PE-

Insulation voltage output / PE-

AC frequency range-

REACh SVHC-

POWER BOOST (IBoost)-

Active current limitation-

Signal-

Width with alternative assembly-

Installation height-

Selective Fuse Breaking (ISFB)-

Insulation voltage input / PE-

Standard - Approval for medical use-

Height with alternative assembly-

Setting range of the output voltage (USet)-

Standard - Equipment safety-

Depth with alternative assembly-

Frequency range DC-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Rail applications-

I/O/S-