1688201 Phoenix Contact Electrical Connectors

Weight-

Contact surface material-

Height130 mm

China RoHSEnvironmentally Friendly Use...

ECLASS 4.127040700

ETIM 6.0EC002540

ETIM 3.0EC001039

UNSPSC 18.039121004

Contact material-

Housing materialSteel sheet, zinc-plated

Number of positions-

ECLASS 10.0.127040701

ECLASS 5.127242200

ETIM 4.0EC002540

UNSPSC 1139121004

UNSPSC 21.039121004

Width96 mm

Mounting type-

ECLASS 4.027040700

ECLASS 6.027049000

ETIM 2.0-

UNSPSC 12.0139121004

UNSPSC 20.039121004

Connection methodScrew connection

Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C De...

Length-

ECLASS 11.027040701

ECLASS 7.027049002

UNSPSC 7.090139121004

UNSPSC 19.039121004

Flammability rating according to UL 94-

Contact carrier material-

Safety note-

ECLASS 5.027242200

ECLASS 9.027040701

UNSPSC 6.0130211502

ETIM 7.0EC002540

UNSPSC 13.239121004

Degree of protectionIP20

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Nominal power consumption1386 VA

Mains buffering timetyp. 25 ms (400 V AC)

Protective circuit/componentVaristor

Feedback voltage resistancemax. 60 V DC

Output power960 W

Depth179 mm

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class3K3 (in acc. with EN 60721)

Input voltage range3x 320 V AC ... 575 V AC

Inrush current< 20 A (typical)

Type of protectionTransient surge protection

Installation distance top/bottom-

Ambient temperature (storage/transport)-40 °C ... 85 °C

Nominal input voltage range3x 400 V AC ... 500 V AC

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallelYes, for redundancy and incr...

Residual ripple< 50 mVPP (with nominal valu...

Control deviation< 1 % (change in load, stati...

Efficiency> 93 % (at 400 V AC and nomi...

Standard – Safety extra-low voltageIEC 60950-1 (SELV) and EN 60...

Discharge in air15 kV (Test Level 4)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dips-

Installation distance right/left-

Degree of pollution2

Current consumption3x 2.1 A (400 V AC)

Recommended breaker for input protection6 A ... 16 A (AC: Characteri...

Nominal output current (IN)20 A (-25 °C ... 60 °C, UOUT...

Nominal output voltage48 V DC ±1 %

Connection in seriesyes

Net weight2.5 kg

Protection classI

Assembly instructionsalignable: PN ≥50%, 5 mm hor...

Conductor cross section AWG min.18

Screw threadM3

Standard - Safety of transformersIEC 61558-2-17

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directi...

Contact discharge8 kV (Test Level 4)

Input2 kV (Test Level 3 - symmetr...

Criterion ANormal operating behavior wi...

MTBF (IEC 61709, SN 29500)> 890000 h (25 °C)

Foot latch material-

Mounting positionhorizontal DIN rail NS 35, E...

Conductor cross section flexible max.4 mm²

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 2 - symmetr...

Derating60 °C ... 70 °C (2.5%/K)

Typical response time< 1 s

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationDIN VDE 0100-410

Criterion BTemporary impairment to oper...

Power loss nominal load max.70 W

Conductor cross section solid min.0.2 mm²

Stripping length10 mm

Low Voltage DirectiveConformance with Low Voltage...

Test field strength10 V/m (Test Level 3)

Voltage10 V (Test Level 3)

Conducted interferenceEN 61000-4-6

Insulation voltage input/output4 kV AC (type test)

Conductor cross section flexible min.0.2 mm²

Standard - Electrical safetyIEC 60950-1/VDE 0805 (SELV)

Frequency range0.15 MHz ... 80 MHz

Protection against overvoltage at the output (OVP)< 60 V DC

Maximum power dissipation in no-load condition24 W

Conductor cross section solid max.6 mm²

Conductor cross section AWG max.10

Mains variation/undervoltage-

UL approvalsUL Listed UL 508

Electrostatic dischargeEN 61000-4-2

Ambient temperature (start-up type tested)-40 °C

Discharge current to PE< 3.5 mA

Insulation voltage output / PE500 V DC (routine test)

AC frequency range45 Hz ... 65 Hz

REACh SVHCLead 7439-92-1

POWER BOOST (IBoost)22.5 A (-25 °C ... 40 °C per...

Active current limitationApprox. IBOOST = 22.5 A (for...

Signal1 kV (Test Level 2 - asymmet...

Width with alternative assembly176 mm

Installation height4000 m

Selective Fuse Breaking (ISFB)100 A (12 ms)

Insulation voltage input / PE3.5 kV AC (type test)

Standard - Approval for medical useIEC 60601-1, 2 x MOOP

Height with alternative assembly130 mm

Setting range of the output voltage (USet)30 V DC ... 56 V DC (> 48 V ...

Standard - Equipment safetyBG (design tested)

Depth with alternative assembly99 mm

Frequency range DC0 Hz

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipmentEN 50178

Rail applicationsEN 50121-4

I/O/Sasymmetrical

Weight5.61 g

Contact surface materialGold over nickel

Height12.93 mm

China RoHSEnvironmentally friendly use...

ECLASS 4.127260700

ETIM 6.0EC000438

ETIM 3.0EC000438

UNSPSC 18.039121522

Contact materialCopper alloy

Housing materialSteel, yellow chromated

Number of positions3

ECLASS 10.0.127440205

ECLASS 5.127260700

ETIM 4.0EC000438

UNSPSC 1139121522

UNSPSC 21.039121522

Width12.4 mm

Mounting typeHole

ECLASS 4.027260700

ECLASS 6.027260700

ETIM 2.0EC000438

UNSPSC 12.0139121522

UNSPSC 20.039121522

Connection methodFitting to accept combined c...

Ambient temperature (operation)-55 °C ... 125 °C

Length39.52 mm

ECLASS 11.027440223

ECLASS 7.027440302

UNSPSC 7.090139121522

UNSPSC 19.039121522

Flammability rating according to UL 94V0

Contact carrier materialPBTP

Safety noteWARNING: The connectors may ...

ECLASS 5.027260700

ECLASS 9.027440205

UNSPSC 6.0130211923

ETIM 7.0EC000438

UNSPSC 13.239121522

Degree of protection-

Max. permissible relative humidity (operation)-

Nominal power consumption-

Mains buffering time-

Protective circuit/component-

Feedback voltage resistance-

Output power-

Depth-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class-

Input voltage range-

Inrush current-

Type of protection-

Installation distance top/bottom-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallel-

Residual ripple-

Control deviation-

Efficiency-

Standard – Safety extra-low voltage-

Discharge in air-

Comments-

Surge voltage load (surge)-

Voltage dips-

Installation distance right/left-

Degree of pollution-

Current consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Nominal output voltage-

Connection in series-

Net weight-

Protection class-

Assembly instructions-

Conductor cross section AWG min.-

Screw thread-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic compatibility-

Contact discharge-

Input-

Criterion A-

MTBF (IEC 61709, SN 29500)-

Foot latch material-

Mounting position-

Conductor cross section flexible max.-

EMC requirements for noise immunity-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSA-

Fast transients (burst)-

Electromagnetic HF field-

Output-

Derating-

Typical response time-

EMC requirements for noise emission-

Standard - Safe isolation-

Criterion B-

Power loss nominal load max.-

Conductor cross section solid min.-

Stripping length-

Low Voltage Directive-

Test field strength-

Voltage-

Conducted interference-

Insulation voltage input/output-

Conductor cross section flexible min.-

Standard - Electrical safety-

Frequency range-

Protection against overvoltage at the output (OVP)-

Maximum power dissipation in no-load condition-

Conductor cross section solid max.-

Conductor cross section AWG max.-

Mains variation/undervoltage-

UL approvals-

Electrostatic discharge-

Ambient temperature (start-up type tested)-

Discharge current to PE-

Insulation voltage output / PE-

AC frequency range-

REACh SVHC-

POWER BOOST (IBoost)-

Active current limitation-

Signal-

Width with alternative assembly-

Installation height-

Selective Fuse Breaking (ISFB)-

Insulation voltage input / PE-

Standard - Approval for medical use-

Height with alternative assembly-

Setting range of the output voltage (USet)-

Standard - Equipment safety-

Depth with alternative assembly-

Frequency range DC-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Rail applications-

I/O/S-

Weight-

Contact surface material-

Height90 mm

China RoHSEnvironmentally Friendly Use...

ECLASS 4.127040700

ETIM 6.0EC002540

ETIM 3.0EC001039

UNSPSC 18.039121004

Contact material-

Housing materialPolycarbonate

Number of positions-

ECLASS 10.0.127040701

ECLASS 5.127049000

ETIM 4.0EC000599

UNSPSC 1139121004

UNSPSC 21.039121004

Width55 mm

Mounting type-

ECLASS 4.027040700

ECLASS 6.027049000

ETIM 2.0-

UNSPSC 12.0139121004

UNSPSC 20.039121004

Connection methodScrew connection

Ambient temperature (operation)-25 °C ... 70 °C (> 55 °C De...

Length-

ECLASS 11.027040701

ECLASS 7.027049002

UNSPSC 7.090139121004

UNSPSC 19.039121004

Flammability rating according to UL 94-

Contact carrier material-

Safety note-

ECLASS 5.027049000

ECLASS 9.027040701

UNSPSC 6.0130211502

ETIM 7.0EC002540

UNSPSC 13.239121004

Degree of protectionIP20

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Nominal power consumption206.3 VA

Mains buffering time> 20 ms (120 V AC)

Protective circuit/componentVaristor

Feedback voltage resistance< 25 V DC

Output power100 W

Depth84 mm

Inflammability class in acc. with UL 94 (housing / terminal blocks)V0

Climatic class3K3 (in acc. with EN 60721)

Input voltage range85 V AC ... 264 V AC

Inrush current< 30 A (typical)

Type of protectionTransient surge protection

Installation distance top/bottom30 mm / 30 mm

Ambient temperature (storage/transport)-40 °C ... 85 °C

Nominal input voltage range100 V AC ... 240 V AC

Frequency range (fN)50 Hz ... 60 Hz 10 %

Input fuse4 A (slow-blow, internal)

Power factor (cos phi)0.54

Connection in parallelYes, for redundancy and incr...

Residual ripple< 75 mVPP (with nominal valu...

Control deviation< 1 % (change in load, stati...

Efficiencytyp. 89 % (120 V AC)

Standard – Safety extra-low voltageIEC 62368-1 (SELV) und EN 60...

Discharge in air8 kV (Test Level 3)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dipsEN 61000-4-11

Installation distance right/left0 mm / 0 mm

Degree of pollution2

Current consumption2.19 A (100 V AC)

Recommended breaker for input protection6 A ... 16 A (Characteristic...

Nominal output current (IN)6.67 A (-25 °C ... 55 °C)

Nominal output voltage15 V DC ±1 %

Connection in seriesyes

Net weight0.34 kg

Protection classII (in closed control cabine...

Assembly instructionsalignable: 0 mm horizontally...

Conductor cross section AWG min.24

Screw threadM3

Standard - Safety of transformersEN 61558-2-16

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directi...

Contact discharge6 kV (Test Level 3)

Input2 kV (Test Level 3 - symmetr...

Criterion ANormal operating behavior wi...

MTBF (IEC 61709, SN 29500)> 727000 h (40 °C)

Foot latch materialPOM (Polyoxymethylen)

Mounting positionhorizontal DIN rail NS 35, E...

Conductor cross section flexible max.2.5 mm²

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 2 - symmetr...

Derating55 °C ... 70 °C (2.5%/K)

Typical response time< 1 s

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationDIN VDE 0100-410

Criterion BTemporary impairment to oper...

Power loss nominal load max.< 12 W

Conductor cross section solid min.0.2 mm²

Stripping length8 mm

Low Voltage DirectiveConformance with Low Voltage...

Test field strength10 V/m

Voltage10 V (Test Level 3)

Conducted interferenceEN 61000-4-6

Insulation voltage input/output4 kV AC (type test)

Conductor cross section flexible min.0.2 mm²

Standard - Electrical safetyIEC 62368-1/VDE 0805 (SELV)

Frequency range10 kHz ... 80 MHz

Protection against overvoltage at the output (OVP)≤ 25 V DC

Maximum power dissipation in no-load condition< 0.4 W

Conductor cross section solid max.2.5 mm²

Conductor cross section AWG max.14

Mains variation/undervoltageEN 61000-4-11

UL approvalsUL/C-UL listed UL 508

Electrostatic dischargeEN 61000-4-2

Ambient temperature (start-up type tested)-

Discharge current to PE-

Insulation voltage output / PE-

AC frequency range-

REACh SVHC-

POWER BOOST (IBoost)-

Active current limitation-

Signal-

Width with alternative assembly-

Installation height-

Selective Fuse Breaking (ISFB)-

Insulation voltage input / PE-

Standard - Approval for medical use-

Height with alternative assembly-

Setting range of the output voltage (USet)-

Standard - Equipment safety-

Depth with alternative assembly-

Frequency range DC-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Rail applications-

I/O/S-

Weight-

Contact surface material-

Height130 mm

China RoHSEnvironmentally Friendly Use...

ECLASS 4.127040700

ETIM 6.0EC002540

ETIM 3.0EC001039

UNSPSC 18.039121004

Contact material-

Housing materialSteel sheet, zinc-plated

Number of positions-

ECLASS 10.0.127040701

ECLASS 5.127242200

ETIM 4.0EC002540

UNSPSC 1139121004

UNSPSC 21.039121004

Width96 mm

Mounting type-

ECLASS 4.027040700

ECLASS 6.027049000

ETIM 2.0-

UNSPSC 12.0139121004

UNSPSC 20.039121004

Connection methodScrew connection

Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C De...

Length-

ECLASS 11.027040701

ECLASS 7.027049002

UNSPSC 7.090139121004

UNSPSC 19.039121004

Flammability rating according to UL 94-

Contact carrier material-

Safety note-

ECLASS 5.027242200

ECLASS 9.027040701

UNSPSC 6.0130211502

ETIM 7.0EC002540

UNSPSC 13.239121004

Degree of protectionIP20

Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-conden...

Nominal power consumption1386 VA

Mains buffering timetyp. 25 ms (400 V AC)

Protective circuit/componentVaristor

Feedback voltage resistancemax. 60 V DC

Output power960 W

Depth179 mm

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class3K3 (in acc. with EN 60721)

Input voltage range3x 320 V AC ... 575 V AC

Inrush current< 20 A (typical)

Type of protectionTransient surge protection

Installation distance top/bottom-

Ambient temperature (storage/transport)-40 °C ... 85 °C

Nominal input voltage range3x 400 V AC ... 500 V AC

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallelYes, for redundancy and incr...

Residual ripple< 50 mVPP (with nominal valu...

Control deviation< 1 % (change in load, stati...

Efficiency> 93 % (at 400 V AC and nomi...

Standard – Safety extra-low voltageIEC 60950-1 (SELV) and EN 60...

Discharge in air15 kV (Test Level 4)

CommentsCriterion A

Surge voltage load (surge)EN 61000-4-5

Voltage dips-

Installation distance right/left-

Degree of pollution2

Current consumption3x 2.1 A (400 V AC)

Recommended breaker for input protection6 A ... 16 A (AC: Characteri...

Nominal output current (IN)20 A (-25 °C ... 60 °C, UOUT...

Nominal output voltage48 V DC ±1 %

Connection in seriesyes

Net weight2.5 kg

Protection classI

Assembly instructionsalignable: PN ≥50%, 5 mm hor...

Conductor cross section AWG min.18

Screw threadM3

Standard - Safety of transformersIEC 61558-2-17

Standard – Limitation of mains harmonic currentsEN 61000-3-2

Electromagnetic compatibilityConformance with EMC Directi...

Contact discharge8 kV (Test Level 4)

Input2 kV (Test Level 3 - symmetr...

Criterion ANormal operating behavior wi...

MTBF (IEC 61709, SN 29500)> 890000 h (25 °C)

Foot latch material-

Mounting positionhorizontal DIN rail NS 35, E...

Conductor cross section flexible max.4 mm²

EMC requirements for noise immunityEN 61000-6-1

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)

CSACAN/CSA-C22.2 No. 60950-1-07

Fast transients (burst)EN 61000-4-4

Electromagnetic HF fieldEN 61000-4-3

Output1 kV (Test Level 2 - symmetr...

Derating60 °C ... 70 °C (2.5%/K)

Typical response time< 1 s

EMC requirements for noise emissionEN 61000-6-3

Standard - Safe isolationDIN VDE 0100-410

Criterion BTemporary impairment to oper...

Power loss nominal load max.70 W

Conductor cross section solid min.0.2 mm²

Stripping length10 mm

Low Voltage DirectiveConformance with Low Voltage...

Test field strength10 V/m (Test Level 3)

Voltage10 V (Test Level 3)

Conducted interferenceEN 61000-4-6

Insulation voltage input/output4 kV AC (type test)

Conductor cross section flexible min.0.2 mm²

Standard - Electrical safetyIEC 60950-1/VDE 0805 (SELV)

Frequency range0.15 MHz ... 80 MHz

Protection against overvoltage at the output (OVP)< 60 V DC

Maximum power dissipation in no-load condition24 W

Conductor cross section solid max.6 mm²

Conductor cross section AWG max.10

Mains variation/undervoltage-

UL approvalsUL Listed UL 508

Electrostatic dischargeEN 61000-4-2

Ambient temperature (start-up type tested)-40 °C

Discharge current to PE< 3.5 mA

Insulation voltage output / PE500 V DC (routine test)

AC frequency range45 Hz ... 65 Hz

REACh SVHCLead 7439-92-1

POWER BOOST (IBoost)22.5 A (-25 °C ... 40 °C per...

Active current limitationApprox. IBOOST = 22.5 A (for...

Signal1 kV (Test Level 2 - asymmet...

Width with alternative assembly176 mm

Installation height4000 m

Selective Fuse Breaking (ISFB)100 A (12 ms)

Insulation voltage input / PE3.5 kV AC (type test)

Standard - Approval for medical useIEC 60601-1, 2 x MOOP

Height with alternative assembly130 mm

Setting range of the output voltage (USet)30 V DC ... 56 V DC (> 48 V ...

Standard - Equipment safetyBG (design tested)

Depth with alternative assembly99 mm

Frequency range DC0 Hz

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipmentEN 50178

Rail applicationsEN 50121-4

I/O/Sasymmetrical

Weight5.61 g

Contact surface materialGold over nickel

Height12.93 mm

China RoHSEnvironmentally friendly use...

ECLASS 4.127260700

ETIM 6.0EC000438

ETIM 3.0EC000438

UNSPSC 18.039121522

Contact materialCopper alloy

Housing materialSteel, yellow chromated

Number of positions3

ECLASS 10.0.127440205

ECLASS 5.127260700

ETIM 4.0EC000438

UNSPSC 1139121522

UNSPSC 21.039121522

Width12.4 mm

Mounting typeHole

ECLASS 4.027260700

ECLASS 6.027260700

ETIM 2.0EC000438

UNSPSC 12.0139121522

UNSPSC 20.039121522

Connection methodFitting to accept combined c...

Ambient temperature (operation)-55 °C ... 125 °C

Length39.52 mm

ECLASS 11.027440223

ECLASS 7.027440302

UNSPSC 7.090139121522

UNSPSC 19.039121522

Flammability rating according to UL 94V0

Contact carrier materialPBTP

Safety noteWARNING: The connectors may ...

ECLASS 5.027260700

ECLASS 9.027440205

UNSPSC 6.0130211923

ETIM 7.0EC000438

UNSPSC 13.239121522

Degree of protection-

Max. permissible relative humidity (operation)-

Nominal power consumption-

Mains buffering time-

Protective circuit/component-

Feedback voltage resistance-

Output power-

Depth-

Inflammability class in acc. with UL 94 (housing / terminal blocks)-

Climatic class-

Input voltage range-

Inrush current-

Type of protection-

Installation distance top/bottom-

Ambient temperature (storage/transport)-

Nominal input voltage range-

Frequency range (fN)-

Input fuse-

Power factor (cos phi)-

Connection in parallel-

Residual ripple-

Control deviation-

Efficiency-

Standard – Safety extra-low voltage-

Discharge in air-

Comments-

Surge voltage load (surge)-

Voltage dips-

Installation distance right/left-

Degree of pollution-

Current consumption-

Recommended breaker for input protection-

Nominal output current (IN)-

Nominal output voltage-

Connection in series-

Net weight-

Protection class-

Assembly instructions-

Conductor cross section AWG min.-

Screw thread-

Standard - Safety of transformers-

Standard – Limitation of mains harmonic currents-

Electromagnetic compatibility-

Contact discharge-

Input-

Criterion A-

MTBF (IEC 61709, SN 29500)-

Foot latch material-

Mounting position-

Conductor cross section flexible max.-

EMC requirements for noise immunity-

Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations-

CSA-

Fast transients (burst)-

Electromagnetic HF field-

Output-

Derating-

Typical response time-

EMC requirements for noise emission-

Standard - Safe isolation-

Criterion B-

Power loss nominal load max.-

Conductor cross section solid min.-

Stripping length-

Low Voltage Directive-

Test field strength-

Voltage-

Conducted interference-

Insulation voltage input/output-

Conductor cross section flexible min.-

Standard - Electrical safety-

Frequency range-

Protection against overvoltage at the output (OVP)-

Maximum power dissipation in no-load condition-

Conductor cross section solid max.-

Conductor cross section AWG max.-

Mains variation/undervoltage-

UL approvals-

Electrostatic discharge-

Ambient temperature (start-up type tested)-

Discharge current to PE-

Insulation voltage output / PE-

AC frequency range-

REACh SVHC-

POWER BOOST (IBoost)-

Active current limitation-

Signal-

Width with alternative assembly-

Installation height-

Selective Fuse Breaking (ISFB)-

Insulation voltage input / PE-

Standard - Approval for medical use-

Height with alternative assembly-

Setting range of the output voltage (USet)-

Standard - Equipment safety-

Depth with alternative assembly-

Frequency range DC-

Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment-

Rail applications-

I/O/S-