2900299 Phoenix Contact Control Relays

Product Details

• Contact material
  AgSnO
• Min. switching current
  10 mA (at 12 V)
• Maximum inrush current
  10 A (4 s)
• Depth
  94 mm
• Mechanical service life
  2x 107 cycles
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Designation
  Corrosive gas test
• Typical input current at UN
  9 mA
• Standards/regulations
  IEC 60664
• ECLASS 11.0
  27371601
• Degree of protection
  RT III (Relay)
• Power dissipation for nominal condition
  0.22 W
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Mounting position
  any
• ECLASS 4.0
  27371000
• Height
  80 mm
• Stripping length
  8 mm
• ETIM 3.0
  EC001437
• ETIM 7.0
  EC001437
UNSPSC 21.0
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical response time
5 ms
Contact type
1 changeover contact
Limiting continuous current
6 A
Type of note
Notes on operation
Note
Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Ambient temperature (operation)
-40 °C ... 60 °C
Nominal input voltage UN
24 V DC
Typical release time
8 ms
Operating voltage display
Yellow LED
Type of switch contact
Single contact
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Flammability rating according to UL 94
V0 (Housing)
Connection name
Contact side
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
UNSPSC 11
39121515
UNSPSC 13.2
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Width
6.2 mm
Protective circuit
Reverse polarity protection Polarity protection diode
Operating mode
100% operating factor
Connection method
Push-in connection
Conductor cross section AWG
26 ... 14
Pollution degree
3
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27371000
ECLASS 5.1
27371600
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371601
ETIM 2.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 12.01
39121515
UNSPSC 20.0
39122334
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
Connection in acc. with standard
CUL
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.0
27371600
ETIM 4.0
EC001437
Minimum switching voltage
5 V (at 100 mA)
Switching capacity
2 A (at 24 V, DC13)
Assembly instructions
In rows with zero spacing