1088774 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  4 mm²
• Area of application
  Railway industry
• Insulating material group
  I
• Back of the hand protection
  guaranteed
• Shock test result
  Test passed
• Shock duration
  18 ms
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Connection
  1st and 2nd level
• Connection in acc. with standard
  IEC 60947-7-2
• Conductor cross section AWG min.
  24
• Min. AWG conductor cross section, flexible
  24
• Internal cylindrical gage
  A4
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 6.0
  27141100
• ETIM 4.0
  EC000897
• ETIM 7.0
  EC000897
• UNSPSC 12.01
  39121410
• Number of levels
  2
• Flammability rating according to UL 94
  V0
• Open side panel
  Yes
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/15
65.5 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141141
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of connections
4
Overvoltage category
III
Rated surge voltage
6 kV
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
6 mm²
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Insulating material
PA
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
99.5 mm
Height
56 mm
Conductor cross section solid min.
0.75 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141141
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Potentials
2
Color
green/yellow
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Finger protection
guaranteed
Test duration per axis
5 h
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Height NS 35/7,5
57.5 mm
Stripping length
9 mm ... 11 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Connection cross sections directly pluggable
0.75 mm² 6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410