1088742 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Conductor cross section tensile test
  6 mm²
• Result of temperature-rise test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  6.2 mm
• Height NS 35/15
  72.3 mm
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Conductor cross section flexible max.
  6 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• Internal cylindrical gage
  A4
• ECLASS 4.1
  27141100
• ECLASS 7.0
  27141116
• ETIM 4.0
  EC000899
• UNSPSC 12.01
  39121410
UNSPSC 18.0
39121410
Number of levels
1
Insulating material
PA
Flammability rating according to UL 94
V0
Rated operating voltage
250 V
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Nominal current IN
6.3 A (the current is determined by the fuse used)
Fuse type
Glass / ceramics / ...
Back of the hand protection
guaranteed
Surge voltage test setpoint
4.8 kV
Contact resistance
Test passed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Tractive force setpoint
80 N
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Stripping length
9 mm ... 11 mm
ECLASS 11.0
27141116
ECLASS 6.0
27141100
ETIM 3.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
ETIM 7.0
EC000899
UNSPSC 20.0
39121410
Note
Swing the locking lever to its final position before replacing the fuse.
Color
black
Maximum power dissipation for nominal condition
1.02 W
Rated surge voltage
6 kV
Insulating material group
I
Maximum load current
6.3 A (with 6 mm² conductor cross section, rigid)
Nominal voltage UN
500 V
Open side panel
Yes
Finger protection
guaranteed
Inscriptions
Test passed
Power frequency withstand voltage setpoint
1.5 kV
Result of tight fit on support
Test passed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Result service life test
Test passed
Temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
63.4 mm
Height NS 35/7,5
64.8 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141116
ECLASS 5.1
27141100
ECLASS 9.0
27141116
ETIM 6.0
EC000899
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Area of application
Railway industry
Degree of pollution
3
Overvoltage category
III
Connection in acc. with standard
IEC 60947-7-3
Fuse
G / 5 x 20
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
57.3 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
10
Connection method
Push-in connection
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410