5603593 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  94 mm
• Typical input current at UN
  7 mA (50 Hz)
• Protective circuit
  Bridge rectifier
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Connection name
  Contact side
• Note
  Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
• Height
  80 mm
• Maximum altitude
  ≤ 2000 m
• Typical response time
  7 ms
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Min. switching current
  10 mA (at 12 V)
• Switching capacity
  2 A (at 24 V, DC13)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Mains frequency
  50/60 Hz
• Typical release time
  20 ms
• Status display
  Yellow LED
• Contact material
  AgSnO
• Limiting continuous current
  6 A
• Assembly instructions
  In rows with zero spacing
Stripping length
8 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Designation
Corrosive gas test
Rated surge voltage
6 kV
Overvoltage category
III
ECLASS 4.0
27371100
ECLASS 4.1
27371100
ECLASS 9.0
27371601
ETIM 3.0
EC001456
UNSPSC 6.01
30211917
UNSPSC 11
39121516
Ambient temperature (operation)
-40 °C ... 55 °C
Degree of protection
RT III (Relay)
Coil voltage
60 V DC
Contact type
1 changeover contact
Minimum switching voltage
5 V (at 100 mA)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Flammability rating according to UL 94
V0 (Housing)
Connection method
Screw connection
Screw thread
M 3
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Insulation
Safe isolation, reinforced insulation
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27371601
ECLASS 11.0
27371601
ECLASS 7.0
27371601
ETIM 4.0
EC001504
ETIM 6.0
EC001437
UNSPSC 13.2
39122326
UNSPSC 12.01
39121516
Width
6.2 mm
Nominal input voltage UN
120 V AC
Typical release voltage
50 V AC
Type of switch contact
Single contact
Operating mode
100% operating factor
Mechanical service life
2x 107 cycles
Mounting position
any
Conductor cross section AWG
26 ... 14
Standards/regulations
DIN EN 50178
Pollution degree
2
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ECLASS 6.0
27371600
ECLASS 5.0
27371600
ETIM 7.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 19.0
39122326