3969927 Phoenix Contact Terminal Blocks

Product Details

• Result of temperature-rise test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• ECLASS 5.1
  27141100
• Conductor cross section short circuit testing
  4 mm²
• Oscillation, broadband noise test result
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• ECLASS 4.1
  27141100
• ECLASS 5.0
  27141100
• Setpoint
  5 N
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Width
  130.4 mm
• Screw thread
  No 8 UNC
• Proof of thermal characteristics (needle flame) effective duration
  30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 9.0
27141126
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Number of connections
24
Insulating material
PA
Maximum load current
30 A (with 10 mm² conductor cross section)
Terminal block mounting
0.8 Nm ... 1 Nm
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Tightening torque, min
1.5 Nm
2 conductors with same cross section, solid max.
6 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
Number of levels
1
Color
gray
Potentials
12
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Number of positions
12
Test surge voltage
5 kV
Nominal cross section
6 mm²
Note regarding shock protection
Back of hand protection without cable lug, as well as with insulated and uninsulated cable lugs with shrink sleeve with tightened clamping screw.
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Nominal voltage UN
400 V AC/DC
Back of the hand protection
guaranteed
Rated surge voltage
4 kV
Insulating material group
I
Acceleration
30g
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Short-time current
1250 A
Overvoltage category
III
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Note
Test with 4 mm² / 500 A / 1 s includes test with 4 mm² / 480 A / 1 s in accordance with IEC 60947-7-1:2009-04.
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Pitch
8.2 mm
Stripping length
12 mm
Conductor cross section flexible max.
10 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Max. cross section for cable lug connection
10 mm²
Max. tightening torque of the mounting screw:
1 Nm
Internal cylindrical gage
A5
Height
70.1 mm
Connection
1 level
Min. AWG conductor cross section, flexible
24
Cable lug connection according to standard
DIN 46237:1970-07
Min. cross section for cable lug connection
0.5 mm²
Bolt diameter
4.1 mm
Result of voltage-drop test
Test passed
ASD level
6.12 (m/s2)2/Hz
Connection method
Ring cable lug
Tightening torque max
1.8 Nm
2 conductors with same cross section, stranded max.
6 mm²
Hole diameter, min.
4.3 mm
2 conductors with same cross section, solid min.
0.5 mm²
REACh SVHC
Lead 7439-92-1
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Plate thickness
1 mm ... 4 mm
Connection in acc. with standard
IEC 60947-7-1
Max. AWG conductor cross section, flexible
8
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
ETIM 7.0
EC000902
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
81 mm
Cable lug width, max.
8 mm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
Test duration per axis
5 h
Mounting type
Wall mounting
ECLASS 11.0
27141126
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Short circuit stability result
Test passed
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section flexible min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 6.0
EC000902
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 12.01
39121410