3969921 Phoenix Contact Terminal Blocks

Product Details

• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Number of positions
  5
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of voltage-drop test
  Test passed
• Result of tight fit on support
  Test passed
• Short-time current
  1250 A
• Conductor cross section short circuit testing
  4 mm²
• Potentials
  5
• Flammability rating according to UL 94
  V0
• Maximum load current
  30 A (with 10 mm² conductor cross section)
• Open side panel
  No
• Note regarding shock protection
  Back of hand protection without cable lug, as well as with insulated and uninsulated cable lugs with shrink sleeve with tightened clamping screw.
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of temperature-rise test
  Test passed
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
73.4 mm
Nominal cross section
6 mm²
Insulating material
PA
Overvoltage category
III
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Result of power-frequency withstand voltage test
Test passed
Note
Test with 4 mm² / 500 A / 1 s includes test with 4 mm² / 480 A / 1 s in accordance with IEC 60947-7-1:2009-04.
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock form
Half-sine
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
81 mm
Number of connections
10
Rated surge voltage
4 kV
Maximum power dissipation for nominal condition
1.31 W
Nominal voltage UN
400 V AC/DC
Setpoint
5 N
Number of levels
1
Color
gray
Test surge voltage
5 kV
Insulating material group
I
Terminal block mounting
0.8 Nm ... 1 Nm
ECLASS 4.0
27141100
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Pitch
8.2 mm
Tightening torque, min
1.5 Nm
Max. AWG conductor cross section, flexible
8
Cable lug connection according to standard
DIN 46237:1970-07
Hole diameter, min.
4.3 mm
Mounting type
Wall mounting
ECLASS 11.0
27141126
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Connection in acc. with standard
IEC 60947-7-1
2 conductors with same cross section, solid min.
0.5 mm²
Min. cross section for cable lug connection
0.5 mm²
Max. cross section for cable lug connection
10 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection method
Ring cable lug
2 conductors with same cross section, stranded max.
6 mm²
Cable lug width, max.
8 mm
Max. tightening torque of the mounting screw:
1 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Tightening torque max
1.8 Nm
2 conductors with same cross section, stranded min.
0.5 mm²
Internal cylindrical gage
A5
ECLASS 10.0.1
27141126
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27141100
ECLASS 9.0
27141126
UNSPSC 13.2
39121410
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Plate thickness
1 mm ... 4 mm
Connection
1 level
Screw thread
No 8 UNC
Conductor cross section flexible max.
10 mm²
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, solid max.
6 mm²
Bolt diameter
4.1 mm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Height
70.1 mm
ECLASS 7.0
27141126
UNSPSC 11
39121410
Stripping length
12 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 7.0
EC000902
UNSPSC 20.0
39121410
Conductor cross section flexible min.
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ETIM 4.0
EC000897
ETIM 6.0
EC000902
UNSPSC 18.0
39121410
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
UNSPSC 6.01
30211811