3969915 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  gray
• Overvoltage category
  III
• Open side panel
  No
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Potentials
  11
• Rated surge voltage
  4 kV
• Maximum power dissipation for nominal condition
  1.31 W
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Width
  122.3 mm
• Nominal cross section
  6 mm²
• Test surge voltage
  5 kV
• Nominal voltage UN
  400 V AC/DC
Terminal block mounting
0.8 Nm ... 1 Nm
Result of power-frequency withstand voltage test
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Short-time current
1250 A
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of positions
11
Flammability rating according to UL 94
V0
Insulating material group
I
Result of surge voltage test
Test passed
Setpoint
5 N
Conductor cross section short circuit testing
4 mm²
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
70.1 mm
Stripping length
12 mm
Number of connections
22
Insulating material
PA
Maximum load current
30 A (with 10 mm² conductor cross section)
Note regarding shock protection
Back of hand protection without cable lug, as well as with insulated and uninsulated cable lugs with shrink sleeve with tightened clamping screw.
Result of tight fit on support
Test passed
Note
Test with 4 mm² / 500 A / 1 s includes test with 4 mm² / 480 A / 1 s in accordance with IEC 60947-7-1:2009-04.
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Pitch
8.2 mm
Test directions
X-, Y- and Z-axis (pos. and neg.)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Ring cable lug
Conductor cross section flexible max.
10 mm²
2 conductors with same cross section, solid min.
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Acceleration
30g
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible min.
0.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Hole diameter, min.
4.3 mm
Mounting type
Wall mounting
Max. tightening torque of the mounting screw:
1 Nm
ECLASS 4.0
27141100
Internal cylindrical gage
A5
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Plate thickness
1 mm ... 4 mm
Screw thread
No 8 UNC
Tightening torque, min
1.5 Nm
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, solid max.
6 mm²
Max. cross section for cable lug connection
10 mm²
Min. cross section for cable lug connection
0.5 mm²
2 conductors with same cross section, stranded max.
6 mm²
Cable lug width, max.
8 mm
Min. tightening torque of the mounting screw:
0.8 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
Length
81 mm
Connection
1 level
Max. AWG conductor cross section, flexible
8
ECLASS 4.1
27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Tightening torque max
1.8 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141126
ECLASS 5.0
27141100
ECLASS 5.1
27141100
UNSPSC 18.0
39121410
ETIM 4.0
EC000897
UNSPSC 20.0
39121410
Bolt diameter
4.1 mm
UNSPSC 6.01
30211811
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
Cable lug connection according to standard
DIN 46237:1970-07
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27141126
ETIM 7.0
EC000902
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410