3281124 Phoenix Contact Terminal Blocks

Product Details

• Result of flexion and pull-out test
  Test passed
• Tight fit on carrier
  NS 35
• Short-time current
  0.42 kA
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test spectrum
  Service life test category 2, bogie-mounted
• Test duration per axis
  5 h
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Width
  10 mm
• Potentials
  1
• Insulating material group
  IIIa
• Nominal current IN
  32 A
• Result of surge voltage test
  Test passed
• ETIM 4.0
  EC000897
• ECLASS 9.0
  27141120
• UNSPSC 13.2
  39121410
• UNSPSC 20.0
  39121410
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Maximum load current
  32 A
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
Conductor cross section short circuit testing
3.5 mm²
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Height NS 35/15
45.7 mm
Nominal cross section
4 mm²
Overvoltage category
III
Nominal voltage UN
690 V
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Number of connections
2
Insulating material
PC
Degree of pollution
3
Bending test turns
135
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Rated surge voltage
6 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Color
black
Maximum power dissipation for nominal condition
1.02 W
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
ETIM 3.0
EC000897
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Bending test rotation speed
10 rpm
Setpoint
1 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Screw thread
M4
Ambient temperature (assembly)
-5 °C ... 70 °C
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
Back of the hand protection
guaranteed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Connection method
Ring cable lug
Min. cross section for cable lug connection
0.5 mm²
Bolt diameter
4 mm
Tightening torque max
2 Nm
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Max. cross section for cable lug connection
3.5 mm²
Cable lug width, max.
8.8 mm
ECLASS 4.0
27141100
ECLASS 6.0
27141100
Shock form
Half-sine
Operating temperature
-60 °C ... 85 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
AWG min
26
AWG max
10
Tightening torque, min
1.4 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
Open side panel
Yes
Shock duration
18 ms
Connection in acc. with standard
IEC 60947-7-1
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
ASD level
6.12 (m/s2)2/Hz
Cable lug connection according to standard
JIS 8207-7-1
Tensile test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
Result of voltage-drop test
Test passed
Shock test result
Test passed
Height NS 35/7,5
38.2 mm
ECLASS 11.0
27141120
ECLASS 5.1
27141100
Length
46 mm
Hole diameter, min.
4.3 mm
Result of power-frequency withstand voltage test
Test passed