3274200 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Color
  white
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Nominal voltage UN
  690 V
• Back of the hand protection
  guaranteed
• Potentials
  1
• Degree of pollution
  3
• Rated surge voltage
  8 kV
• Maximum total current
  57 A (with 10 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
Number of levels
1
Nominal cross section feed-in
6 mm²
Overvoltage category
III
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 15
31.4 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible max.
10 mm²
Connection
Feed-in stage
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Number of connections
13
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal current IN
41 A (with 6 mm² conductor cross section)
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Setpoint
5 N
Conductor cross section short circuit testing
10 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
28.6 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section solid max.
10 mm²
Max. AWG conductor cross section, flexible
10
Internal cylindrical gage
A3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Short-time current
1.2 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Connection method
Push-in connection
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Value
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Width
41 mm
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Bending test rotation speed
10 rpm
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.0
27141121
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 18.0
39121410