3274183 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  7
• Potentials
  1
• Rated surge voltage
  8 kV
• Nominal voltage UN
  690 V
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test rotation speed
  10 rpm
• Setpoint
  5 N
• Conductor cross section short circuit testing
  10 mm²
• Result of aging test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Width
  25.6 mm
• Conductor cross section solid max.
  10 mm²
• Conductor cross section flexible max.
  10 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Connection
  Feed-in stage
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ETIM 7.0
EC000897
ETIM 6.0
EC000897
Nominal cross section feed-in
6 mm²
Overvoltage category
III
Maximum total current
57 A (with 10 mm² conductor cross section)
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
28.6 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal current IN
41 A (with 6 mm² conductor cross section)
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Short-time current
1.2 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of thermal test
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Number of levels
1
Degree of pollution
3
Maximum load current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Color
pink
Insulating material
PA
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 15
31.4 mm
Conductor cross section AWG max.
8
Connection in acc. with standard
IEC 60947-7-1
Max. AWG conductor cross section, flexible
10
Value
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 4.0
27141121
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
UNSPSC 12.01
39121410