3273760 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  black
• Insulating material
  PA
• Overvoltage category
  III
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Height NS 35/7,5
  30.9 mm
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section AWG min.
  20
• Potentials
  1
• Insulating material group
  I
Nominal voltage UN
800 V
Result of power-frequency withstand voltage test
Test passed
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Setpoint
5 N
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
10 mm²
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Nominal cross section
4 mm²
Degree of pollution
3
Maximum total current
63 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
2 kV
Tensile test result
Test passed
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Short-time current
1.2 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
46.3 mm
Conductor cross section solid max.
16 mm²
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
0.5 mm² 16 mm²
Connection
Feed-in stage
Internal cylindrical gage
A4
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ETIM 3.0
EC000897
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Number of connections
13
Rated surge voltage
6 kV
Maximum load current
63 A
Open side panel
No
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
45.7 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Nominal cross section feed-in
10 mm²
Flammability rating according to UL 94
V0
Nominal current IN
32 A
Result of surge voltage test
Test passed
UNSPSC 18.0
39121410
Connection in acc. with standard
IEC 60947-7-1
Stripping length
12 mm ... 14 mm
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Max. AWG conductor cross section, flexible
8
Value
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410