3273724 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section feed-in
  10 mm²
• Overvoltage category
  III
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Setpoint
  5 N
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  5 h
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Rated surge voltage
  6 kV
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Result of surge voltage test
  Test passed
• Tight fit on carrier
  NS 35
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Conductor cross section short circuit testing
10 mm²
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
UNSPSC 18.0
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 4.0
27141121
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Number of connections
7
Insulating material
PA
Maximum load current
41 A (with 6 mm² conductor connection)
Nominal current IN
41 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Tensile test result
Test passed
Tractive force setpoint
60 N
Short circuit stability result
Test passed
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
27.9 mm
Connection
Pick-off level
Conductor cross section flexible max.
4 mm²
Min. AWG conductor cross section, flexible
24
Value
0.75 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
Nominal cross section
4 mm²
Insulating material group
I
Maximum total current
63 A
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Note
When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks.
Result of temperature-rise test
Test passed
Short-time current
1.2 kA
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Connection method
Push-in connection
Conductor cross section solid min.
0.5 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible min.
0.2 mm²
Internal cylindrical gage
A4
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
Number of levels
1
Color
gray
Degree of pollution
3
Nominal voltage UN
800 V
Power frequency withstand voltage setpoint
2 kV
Conductor cross section tensile test
4 mm²
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
45.7 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141121
ECLASS 5.1
27141120
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
Result of flexion and pull-out test
Test passed