3273698 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  12
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Color
  orange
• Insulating material group
  I
• Maximum load current
  41 A
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Tight fit on carrier
  NS 35
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Result of aging test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Maximum power dissipation for nominal condition
  1.02 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Potentials
1
Nominal cross section
4 mm²
Degree of pollution
3
Maximum total current
63 A
Nominal voltage UN
800 V
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Result of temperature-rise test
Test passed
Short-time current
0.72 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
10
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Insulating material
PA
Rated surge voltage
6 kV
Nominal current IN
32 A
Open side panel
No
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Result of tight fit on support
Test passed
Setpoint
5 N
Conductor cross section short circuit testing
6 mm²
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test duration per axis
5 h
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
45.7 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
6 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
36.9 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
ECLASS 10.0.1
27141120
ECLASS 4.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410