3273482 Phoenix Contact Terminal Blocks

Product Details

• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Number of connections
  13
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Back of the hand protection
  guaranteed
• Open side panel
  No
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height
  22.7 mm
• Potentials
  1
• Insulating material
  PA
• Overvoltage category
  III
• Nominal voltage UN
  450 V
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Width
  41 mm
• Stripping length
  10 mm ... 12 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Min. AWG conductor cross section, flexible
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
Number of levels
1
Flammability rating according to UL 94
V0
Maximum total current
57 A (with 10 mm² conductor cross section)
Finger protection
guaranteed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
1 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141121
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Color
gray
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible min.
0.5 mm²
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection
Feed-in stage
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
28.6 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
10
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 6.0
27141100
Degree of pollution
3
Result of thermal test
Test passed
Shock test result
Test passed
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Nominal cross section feed-in
6 mm²
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Maximum load current
57 A (with 10 mm² conductor cross section)
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141120
UNSPSC 21.0
39121410
Nominal current IN
41 A (with 6 mm² conductor cross section)
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Value
1 mm²
UNSPSC 13.2
39121410