3273438 Phoenix Contact Terminal Blocks
Part#:3273438
Manufacturer:Phoenix Contact
Category:Terminal Blocks
Product Lifecycle:Active
Get a quick Quote!
Distribution block, Basic terminal block, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 24 A, connection method: Push-in connection, number of
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273438 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
- Potentials 1
- Rated surge voltage 6 kV
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Flammability rating according to UL 94 V0
- Maximum total current 48 A
- Oscillation, broadband noise test result Test passed
- Shock test result Test passed
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Nominal cross section 2.5 mm²
- Overvoltage category III
- Open side panel No
- Number of levels 1
- Insulating material PA
- Number of connections 18
- Nominal current IN 24 A
- Nominal voltage UN 450 V
- Test spectrum Service life test category 2, bogie-mounted
- Acceleration 30g
- Shock form Half-sine
- Surface flammability NFPA 130 (ASTM E 162) passed
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Length 28.6 mm
- Height 22.7 mm
- Conductor cross section flexible min. 0.14 mm²
- Min. AWG conductor cross section, flexible 26
- Connection cross sections directly pluggable 0.34 mm² 4 mm² 24 12
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 11.0 27141120
- ECLASS 6.0 27141100
- ETIM 3.0 EC000897
- Degree of pollution 3
- Finger protection guaranteed
- ASD level 6.12 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock duration 18 ms
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section AWG min. 26
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 4.1 27141121
- ECLASS 7.0 27141120
- UNSPSC 11 39121410
- Maximum power dissipation for nominal condition 0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Back of the hand protection guaranteed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Number of shocks per direction 3
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Connection method Push-in connection
- Conductor cross section solid min. 0.34 mm²
- Conductor cross section AWG max. 12
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- Operating temperature -35 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 4.0 27141121
- ECLASS 5.0 27141120
- ETIM 7.0 EC000897
- ETIM 6.0 EC000897
- UNSPSC 13.2 39121410
- Color gray
- Insulating material group I
- Maximum load current 32 A
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test duration per axis 5 h
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Stripping length 8 mm ... 10 mm
- Connection in acc. with standard IEC 60998-2-2
- Conductor cross section flexible max. 2.5 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 10.0.1 27141120
- ETIM 4.0 EC000897
- UNSPSC 12.01 39121410
- UNSPSC 20.0 39121410
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 46.9 mm
- Conductor cross section solid max. 4 mm²
- Max. AWG conductor cross section, flexible 12
- Internal cylindrical gage A3
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.1 27141120
- ECLASS 9.0 27141120
- UNSPSC 7.0901 39121410
- UNSPSC 21.0 39121410
- UNSPSC 6.01 30211811
- UNSPSC 18.0 39121410
- UNSPSC 19.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Need more details?
Feel free to chat with us
What can I help you find today?