3273395 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Insulating material
  PA
• Maximum load current
  32 A
• Back of the hand protection
  guaranteed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  28.6 mm
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 4.0
  27141121
• ECLASS 4.1
  27141121
• ECLASS 7.0
  27141120
• ETIM 3.0
  EC000897
• UNSPSC 7.0901
  39121410
• UNSPSC 20.0
  39121410
• Color
  gray
• Degree of pollution
  3
Maximum total current
48 A
Finger protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
22.7 mm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of connections
6
Overvoltage category
III
Open side panel
No
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Potentials
1
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
450 V
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal current IN
24 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Width
16 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
12
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²