3273220 Phoenix Contact Terminal Blocks

Product Details

• Rated surge voltage
  8 kV
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• ETIM 6.0
  EC000897
• Nominal cross section
  2.5 mm²
• Color
  gray
• Maximum total current
  57 A (with 10 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Ageing test for screwless modular terminal block temperature cycles
  192
• ASD level
  6.12 (m/s2)2/Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Connection in acc. with standard
  IEC 60947-7-1
• Conductor cross section AWG max.
  8
• Min. AWG conductor cross section, flexible
  20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 4.1
27141121
ECLASS 7.0
27141120
Number of levels
1
Insulating material
PA
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Short-time current
1.2 kA
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Conductor cross section AWG min.
20
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection
Feed-in stage
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Number of connections
13
Nominal cross section feed-in
6 mm²
Degree of pollution
3
Maximum load current
57 A (with 10 mm² conductor cross section)
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Setpoint
5 N
Conductor cross section short circuit testing
10 mm²
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Potentials
1
Flammability rating according to UL 94
V0
Insulating material group
I
Overvoltage category
III
Nominal voltage UN
690 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
45.7 mm
Conductor cross section solid min.
1 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Value
1 mm²
Internal cylindrical gage
A3
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Width
41 mm
Stripping length
10 mm ... 12 mm
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)