3273192 Phoenix Contact Terminal Blocks

Product Details

• Insulating material group
  I
• Open side panel
  No
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Insulating material
  PA
• Number of levels
  1
• Rated surge voltage
  8 kV
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Maximum total current
  48 A
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Setpoint
  1 N
• Short circuit stability result
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  30g
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
Potentials
1
Flammability rating according to UL 94
V0
Maximum load current
32 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
46.9 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
26
Nominal cross section
2.5 mm²
Degree of pollution
3
Nominal current IN
24 A
Finger protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Number of connections
18
Color
violet
Overvoltage category
III
Nominal voltage UN
690 V
Back of the hand protection
guaranteed
Tensile test result
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
45.7 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
UNSPSC 18.0
39121410
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
Number of shocks per direction
3
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection method
Push-in connection
Height NS 35/7,5
30.9 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141121
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 5.0
27141120
UNSPSC 6.01
30211811
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Result of surge voltage test
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 4.1
27141121
Result of thermal test
Test passed
Conductor cross section flexible max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Test directions
X-, Y- and Z-axis (pos. and neg.)