3273182 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  18
• Number of levels
  1
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  8 kV
• Maximum total current
  48 A
• Color
  yellow
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Setpoint
  1 N
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/7,5
  30.9 mm
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section AWG max.
  12
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 10.0.1
  27141120
• ECLASS 5.0
  27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
46.9 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Potentials
1
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
45.7 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Degree of pollution
3
Overvoltage category
III
Nominal current IN
24 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
690 V
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Shock test result
Test passed
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Insulating material
PA
Finger protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Flammability rating according to UL 94
V0
Maximum load current
32 A
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Number of shocks per direction
3