3270440 Phoenix Contact Terminal Blocks

Product Details

• Short circuit stability result
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Shock duration
  30 ms
• Shock form
  Half-sine
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Oscillation, broadband noise test result
  Test passed
• Number of shocks per direction
  3
• Result of aging test
  Test passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Max. AWG conductor cross section, flexible
  14
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Acceleration
  5g
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Insulating material
PA
Degree of pollution
3
Maximum power dissipation for nominal condition
0.56 W
Power frequency withstand voltage setpoint
1.89 kV
Color of connection elements
blue
Insulating material group
I
Result of surge voltage test
Test passed
Bending test turns
135
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Nominal cross section
1.5 mm²
Color
gray
Overvoltage category
III
Nominal current IN
17.5 A
Number of connections
6
Rated surge voltage
6 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
ECLASS 9.0
27141120
ETIM 7.0
EC000897
Number of positions
1
Number of levels
1
Flammability rating according to UL 94
V0
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Open side panel
No
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
UNSPSC 20.0
39121410
Nominal voltage UN
500 V
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
ECLASS 6.0
27141100
Shock test result
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
11 mm
Connection method
Push-in connection
Conductor cross section AWG min.
26
ECLASS 7.0
27141120
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
ASD level
0.964 (m/s2)2/Hz
UNSPSC 18.0
39121410
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Back of the hand protection
guaranteed
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section solid max.
2.5 mm²
ECLASS 4.0
27141100
Tight fit on carrier
NS 35
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Setpoint
1 N
Length
12.2 mm
Height
30 mm
Conductor cross section AWG max.
14
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
1.5 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
Conductor cross section short circuit testing
2.5 mm²
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100