3270330 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Maximum load current
  24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Flammability rating according to UL 94
  V0
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Finger protection
  guaranteed
• Insulating material group
  I
• Maximum power dissipation for nominal condition
  0.56 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Insulating material
  PA
• Overvoltage category
  III
• Nominal voltage UN
  500 V
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Back of the hand protection
  guaranteed
• Setpoint
  1 N
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
Shock form
Half-sine
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 6.0
27141100
Result of power-frequency withstand voltage test
Test passed
Open side panel
No
Bending test turns
135
Result of tight fit on support
Test passed
Tensile test result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
0.964 (m/s2)2/Hz
Acceleration
5g
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
110 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
1.5 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
73.2 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
30 mm
Conductor cross section AWG min.
26
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
14
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ETIM 6.0
EC000897
ECLASS 7.0
27141120
UNSPSC 21.0
39121410
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection method
Push-in connection
Stripping length
8 mm ... 10 mm
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
UNSPSC 20.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Nominal cross section
1.5 mm²
Color
gray
Rated surge voltage
6 kV
UNSPSC 18.0
39121410
Number of positions
80
Nominal current IN
17.5 A
Number of connections
320
Color of connection elements
blue
Degree of pollution
3
ETIM 7.0
EC000897
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)