3270082 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  gray
• Degree of pollution
  3
• Maximum load current
  20 A (with 4 mm² conductor cross section)
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Setpoint
  1 N
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.77 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of flexion and pull-out test
  Test passed
• Tight fit on carrier
  NS 35
Short-time current
0.48 kA
Result of aging test
Test passed
Test duration per axis
5 h
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Potentials
1
Overvoltage category
III
Nominal current IN
20 A
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Number of connections
3
Flammability rating according to UL 94
V0
Nominal voltage UN
400 V
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
5.2 mm
Length
67.8 mm
Height NS 35/15
44 mm
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 21.0
39121410
Nominal cross section
2.5 mm²
Rated surge voltage
6 kV
Insulating material group
I
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Connection method
Push-in connection
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141126
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Height NS 35/7,5
36.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A3
ECLASS 4.0
27141100
ECLASS 11.0
27141126
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 10.0.1
27141126
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000902
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410