3247990 Phoenix Contact Terminal Blocks

Product Details

• Maximum power dissipation for nominal condition
  16.22 W
• Note regarding shock protection
  Touch proofness is effective only if the ring cable lug is insulated with a shrink sleeve and does not extend beyond the cover.
• Short-time current
  36 kA
• Test duration per axis
  5 h
• Number of shocks per direction
  3
• Tightening torque max
  35 Nm
• ECLASS 10.0.1
  27141120
• ETIM 3.0
  EC000897
• ETIM 4.0
  EC000897
• UNSPSC 20.0
  39121410
• UNSPSC 18.0
  39121410
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  300 mm²
• ASD level
  1.857 (m/s2)2/Hz
• Test spectrum
  Service life test category 1, class B, body mounted
• Shock duration
  30 ms
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
Length
283.5 mm
Pitch
54.8 mm
AWG min
0
Bolt diameter
16 mm
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Number of levels
1
Insulating material group
I
Area of application
Railway industry
Nominal current IN
520 A
Finger protection
guaranteed
Setpoint
20 N
Short circuit stability result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
ECLASS 4.0
27141100
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Number of connections
2
Rated surge voltage
8 kV
Maximum load current
520 A (At a conductor cross section of 300 mm²)
Open side panel
No
Result of surge voltage test
Test passed
Height NS 35/7,5
91.8 mm
Width
54.8 mm
Connection method
Bolt connection
Tightening torque, min
25 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Cable lug connection according to standard
DIN 46235:1983-07
Max. cross section for cable lug connection
300 mm²
Cable lug width, max.
48 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Insulating material
PA
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Tight fit on carrier
NS 35
Nominal cross section
300 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
5g
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
99.3 mm
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
UNSPSC 21.0
39121410
Number of positions
1
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Hole diameter, min.
17 mm
Min. cross section for cable lug connection
50 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Color
blue
Degree of pollution
3
Nominal voltage UN
1500 V
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
Result of tight fit on support
Test passed
Connection in acc. with standard
CSA
Screw thread
M16
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection
1 level
AWG max
500 kcmil
ECLASS 5.0
27141100
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100