3247973 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Color
  gray
• Rated surge voltage
  8 kV
• Nominal current IN
  192 A
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2.2 kV
• Setpoint
  10 N
• Short-time current
  8.4 kA
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Result of voltage-drop test
  Test passed
• Potentials
  1
• Degree of pollution
  3
• Maximum load current
  192 A (in case of a 70 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Test spectrum
  Service life test category 1, class B, body mounted
• Test duration per axis
  5 h
• Number of shocks per direction
  3
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section short circuit testing
70 mm²
Maximum power dissipation for nominal condition
6.27 W
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
29 mm
Height
66 mm
Height NS 35/7,5
67 mm
Number of positions
1
Area of application
Railway industry
Overvoltage category
III
Number of levels
1
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
184 mm
ETIM 4.0
EC000897
Insulating material
PA
Flammability rating according to UL 94
V0
Nominal voltage UN
1500 V
Finger protection
guaranteed
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Nominal cross section
70 mm²
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Note regarding shock protection
Touch proofness is effective only if the ring cable lug is insulated with a shrink sleeve and does not extend beyond the cover.
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
74.5 mm
Connection in acc. with standard
UL
Bolt diameter
8 mm
ECLASS 11.0
27141120
ETIM 3.0
EC000897
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Connection
1 level
Cable lug connection according to standard
DIN 46237:1970-07
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Cable lug width, max.
14 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
ASD level
1.857 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Pitch
29 mm
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Hole diameter, min.
8.4 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Max. cross section for cable lug connection
6 mm²
Tightening torque, min
6 Nm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Min. cross section for cable lug connection
2.5 mm²
Screw thread
M8
Tightening torque max
12 Nm
ECLASS 10.0.1
27141120
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
ECLASS 4.1
27141100
UNSPSC 13.2
39121410
UNSPSC 7.0901
39121410
Connection method
Bolt connection
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 20.0
39121410