3245121 Phoenix Contact Terminal Blocks

Product Details

• Tightening torque max
  0.6 Nm
• Insulating material group
  I
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection method
  Screw connection
• Conductor cross section solid max.
  4 mm²
• Min. AWG conductor cross section, flexible
  26
• ECLASS 6.0
  27141100
• Number of connections
  2
• Nominal cross section
  2.5 mm²
• Height NS 35/15
  55 mm
• Screw thread
  M3
• Conductor cross section AWG max.
  12
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.14 mm²
• ECLASS 7.0
  27141120
• ETIM 3.0
  EC000897
• Rated surge voltage
  8 kV
• Maximum power dissipation for nominal condition
  0.77 W
• Result of surge voltage test
  Test passed
Tight fit on carrier
NS 35
Flammability rating according to UL 94
V0
Conductor cross section flexible min.
0.14 mm²
Result of temperature-rise test
Test passed
Height NS 35/7,5
47.5 mm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Conductor cross section solid min.
0.14 mm²
2 conductors with same cross section, solid min.
0.14 mm²
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Length
47.7 mm
Stripping length
9 mm
Potentials
1
Color
black/yellow
Area of application
Railway industry
Nominal current IN
24 A
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
12
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
Number of levels
1
Nominal voltage UN
1000 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s2)2/Hz
Shock test result
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Bending test turns
135
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Maximum load current
32 A (with 4 mm² conductor cross section)
Open side panel
Yes
Power frequency withstand voltage setpoint
2.2 kV
Result of flexion and pull-out test
Test passed
Oscillation, broadband noise test result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
UNSPSC 7.0901
39121410
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Insulating material
PA
Degree of pollution
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Tightening torque, min
0.5 Nm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Connection in acc. with standard
CSA