3213221 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Nominal current IN
  20 A
• Back of the hand protection
  guaranteed
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• ASD level
  6.12 (m/s2)2/Hz
• Shock duration
  18 ms
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• ECLASS 10.0.1
  27141127
• ECLASS 5.0
  27141100
• ETIM 4.0
  EC000897
• UNSPSC 13.2
  39121410
• Number of levels
  2
• Rated surge voltage
  6 kV
• Maximum load current
  26 A (with 4 mm² conductor cross section, rigid)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Connection method
Push-in connection
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27141127
Nominal cross section
2.5 mm²
Insulating material
PA
Insulating material group
I
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
68 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 4.1
27141100
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Note
The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A.
Overvoltage category
III
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V
Surge voltage test setpoint
7.3 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short-time current
0.48 kA
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid max.
4 mm²
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Stripping length
10 mm
ECLASS 11.0
27141127
ECLASS 9.0
27141127
ETIM 7.0
EC000903
UNSPSC 21.0
39121410
Number of connections
4
Flammability rating according to UL 94
V0
Degree of pollution
3
Open side panel
Yes
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Setpoint
1 N
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Height NS 35/15
55 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
12
Internal cylindrical gage
A3
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
ETIM 3.0
EC000897
ETIM 6.0
EC000903
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Number of shocks per direction
3