3211799 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Insulating material
  PA
• Insulating material group
  I
• Nominal current IN
  24 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Acceleration
  5g
• Number of shocks per direction
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Potentials
  1
• Overvoltage category
  III
• Maximum load current
  30 A (with 4 mm² conductor cross section, rigid)
• Open side panel
  Yes
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
1.857 (m/s2)2/Hz
Shock test result
Test passed
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
49 mm
Color
gray
Rated surge voltage
8 kV
Nominal voltage UN
800 V
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Setpoint
1 N
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Height NS 35/15
50.5 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
Number of levels
1
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Tensile test result
Test passed
Result of tight fit on support
Test passed
Short-time current
0.48 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Connection
1 level
Connection in acc. with standard
CSA
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
43 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Connection method
Push-in connection
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410