3210981 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Insulating material
  PA
• Nominal current IN
  24 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Surge voltage test setpoint
  7.3 kV
• Tractive force setpoint
  60 N
• Requirements, voltage drop
  ≤ 3.2 mV
• Result of aging test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Conductor cross section flexible max.
  4 mm²
• Stripping length
  8 mm ... 10 mm
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 11.0
  27141141
• ECLASS 6.0
  27141100
• ETIM 4.0
  EC000901
• ETIM 3.0
  EC000901
• UNSPSC 21.0
  39121410
• Number of connections
  4
Rated surge voltage
6 kV
Insulating material group
I
Open side panel
Yes
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141141
ETIM 6.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Color
gray
Degree of pollution
3
Maximum load current
30 A (with 4 mm² conductor cross section, rigid)
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
Height NS 35/7,5
47.5 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
12
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 7.0
27141141
ECLASS 9.0
27141141
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Number of levels
2
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/15
55 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 2.0
EC000901
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Overvoltage category
III
Connection in acc. with standard
CSA
Result of power-frequency withstand voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
68 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ETIM 7.0
EC000901
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410