3210328 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  gray
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Maximum power dissipation for nominal condition
  0.56 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Tight fit on carrier
  NS 35
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Short-time current
  0.18 kA
• Ageing test for screwless modular terminal block temperature cycles
  192
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Static insulating material application in cold
  -60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
76.9 mm
Height NS 35/15
39.5 mm
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
14
Bending test turns
135
Potentials
1
Nominal cross section
1.5 mm²
Insulating material group
I
Maximum load current
17.5 A
Open side panel
Yes
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
1.5 mm²
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock form
Half-sine
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
0.8 mm
Height
30.5 mm
Connection method
Push-in connection
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of connections
4
Insulating material
PA
Degree of pollution
3
Nominal current IN
17.5 A
Nominal voltage UN
400 V
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Setpoint
1 N
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
3.5 mm
Height NS 35/7,5
32 mm
Connection
1 level
Conductor cross section solid min.
0.25 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1 / B1
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410