3210317 Phoenix Contact Terminal Blocks

Product Details

• Height
  30.5 mm
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Number of connections
  3
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Nominal current IN
  17.5 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Oscillation, broadband noise test result
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
Length
67.8 mm
Potentials
1
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
400 V
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
0.8 mm
Connection method
Push-in connection
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
Number of levels
1
Color
gray
Rated surge voltage
6 kV
Maximum load current
17.5 A
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
0.25 mm²
Min. AWG conductor cross section, flexible
26
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Nominal cross section
1.5 mm²
Degree of pollution
3
Maximum power dissipation for nominal condition
0.56 W
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
32 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A1 / B1
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 19.0
39121410
Result of voltage-drop test
Test passed
Short-time current
0.18 kA
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
3.5 mm
Height NS 35/15
39.5 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 5.1
27141100
UNSPSC 13.2
39121410