3208540 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  1.5 mm²
• Flammability rating according to UL 94
  V0
• Bending test rotation speed
  10 rpm
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test frequency
  5 - 250 Hz
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Short circuit stability result
  Test passed
• Conductor cross section short circuit testing
  1.5 mm²
• Bending test turns
  135
• Conductor cross section tensile test
  1.5 mm²
• Result of voltage-drop test
  Test passed
• Requirements, voltage drop
  ≤ 3.2 mV
• Result of thermal test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Result of temperature-rise test
  Test passed
• Result of aging test
  Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
65.4 mm
Tensile test result
Test passed
Short-time current
0.18 kA
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock test result
Test passed
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height
41.1 mm
Shock duration
18 ms
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
42.6 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
Overvoltage category
III
Maximum load current
16 A
Power frequency withstand voltage setpoint
1.89 kV
Width
3.5 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
UNSPSC 18.0
39121410
Rated surge voltage
6 kV
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
ECLASS 4.1
27141100
UNSPSC 6.01
30211811
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Insulating material group
I
Open side panel
Yes
Result of surge voltage test
Test passed
Height NS 35/15
50.1 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section AWG max.
14
Stripping length
8 mm ... 10 mm
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
40 N
Result of tight fit on support
Test passed
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm² Using the AI-S 1-8 TQ ferrule, Order No. 1200293, is recommended
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
Insulating material
PA
Nominal current IN
16 A
Surge voltage test setpoint
7.3 kV
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Color
gray
Number of connections
4
Back of the hand protection
guaranteed
Setpoint
1 N
ECLASS 4.0
27141100
UNSPSC 13.2
39121410
Connection in acc. with standard
CSA
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Internal cylindrical gage
A1 / B1
Number of levels
2
Area of application
Railway industry
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
UNSPSC 21.0
39121410
Finger protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
ECLASS 9.0
27141120