3118012 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27141100
• ETIM 2.0
  EC000899
• ETIM 4.0
  EC000899
• UNSPSC 11
  39121411
• UNSPSC 20.0
  39121410
• Color
  black
• Maximum power dissipation for nominal condition
  1.02 W
• Connection in acc. with standard
  CSA
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Power frequency withstand voltage setpoint
  1.5 kV
• Actuatiing forces on plug in or lever in fuse insert carriers
  Test passed
• Bending test turns
  135
Number of connections
2
Insulating material
PA
Rated operating voltage
250 V
Fuse
G / 5 x 20 / 5 x 25
Nominal current IN
6.3 A
Back of the hand protection
guaranteed
Note
During the replacement of the fuse-link the safety from finger-touch is not ensured, without additional measures.The safety from finger-touch is ensured with inserted fuse-link.
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.2 mm
Conductor cross section solid min.
0.2 mm²
Cross section with insertion bridge, solid max.
4 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Tightening torque, min
0.6 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141116
ECLASS 5.1
27141100
ETIM 7.0
EC000899
UNSPSC 6.01
30211812
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Degree of pollution
3
Rated surge voltage
4 kV
Nominal voltage UN
400 V (As a fuse terminal block)
Open side panel
No
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Result of tight fit on support
Test passed
Result of flexion and pull-out test
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 32
63 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Internal cylindrical gage
A4
Screw thread
M3
ECLASS 4.0
27141100
ECLASS 9.0
27141116
ETIM 6.0
EC000899
UNSPSC 18.0
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Insulating material group
I
Maximum load current
6.3 A (is determined by the fuse used)
Fuse type
Glass / ceramics / ...
Surge voltage test setpoint
4.8 kV
Result of surge voltage test
Test passed
Contact resistance
Test passed
Bending test rotation speed
10 rpm
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
59.5 mm
Height NS 35/15
65.5 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Connection method
Screw connection
Tightening torque max
0.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141116
UNSPSC 7.0901
39121411
UNSPSC 19.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
ASD level
1.857 (m/s2)2/Hz
Shock duration
30 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
58 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Stripping length
9 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141116
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000899
UNSPSC 13.2
39121410
UNSPSC 12.01
39121411