3075919 Phoenix Contact Terminal Blocks

Product Details

• End cover width
  2.2 mm
• Pitch
  17 mm
• Connection
  1 level
• AWG min
  14
• Bolt diameter
  6 mm
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 10.0.1
  27141120
• ECLASS 5.1
  27141100
• ETIM 3.0
  EC000897
• UNSPSC 11
  39121410
• UNSPSC 21.0
  39121410
• Nominal cross section
  35 mm²
• Rated surge voltage
  8 kV
• Insulating material group
  I
• Result of power-frequency withstand voltage test
  Test passed
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Conductor cross section short circuit testing
  35 mm²
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Acceleration
  5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
17 mm
Connection method
Bolt connection
Min. cross section for cable lug connection
2.5 mm²
Hole diameter, min.
6.5 mm
Tightening torque max
3.7 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Maximum load current
125 A (with 35 mm² conductor cross section)
Nominal voltage UN
800 V
Result of tight fit on support
Test passed
Short-time current
4.2 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Cable lug width, max.
11 mm
Tightening torque, min
3.2 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Potentials
1
Insulating material
PA
Overvoltage category
III
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
10 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
1.857 (m/s2)2/Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
80.8 mm
Connection in acc. with standard
CUL
Cable lug connection according to standard
DIN 46237:1970-07
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Number of levels
1
Color
gray
Degree of pollution
3
Maximum power dissipation for nominal condition
4.06 W
Nominal current IN
125 A
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
39.7 mm
Max. cross section for cable lug connection
6 mm²
AWG max
10
Screw thread
M6
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410