3072817 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 7.0
  27141126
• Rated surge voltage
  8 kV
• Connection in acc. with standard
  IEC 60947-7-1
• Back of the hand protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Color
  gray
• Setpoint
  5 N
• Temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Flammability rating according to UL 94
  V0
• Nominal current IN
  41 A
• Result of surge voltage test
  Test passed
• Surge voltage test setpoint
  9.8 kV
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Number of levels
  1
• Insulating material
  PA
• Degree of pollution
  3
• Maximum load current
  50 A (with 10 mm² conductor cross section)
• Result of power-frequency withstand voltage test
  Test passed
Bending test turns
135
Tractive force setpoint
90 N
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
10 mm²
Result of voltage-drop test
Test passed
ECLASS 5.1
27141100
UNSPSC 19.0
39121410
UNSPSC 18.0
39121410
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Requirements, voltage drop
≤ 3.2 mV
Conductor cross section short circuit testing
10 mm²
ETIM 6.0
EC000902
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
ETIM 7.0
EC000902
UNSPSC 11
39121410
UNSPSC 13.2
39121410
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Open side panel
Yes
Length
105.2 mm
Short-time current
1.2 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Number of connections
2
Nominal voltage UN
1000 V (The accessories used may reduce the voltage.)
Power frequency withstand voltage setpoint
2.2 kV
Finger protection
guaranteed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Height NS 35/15
60.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.2 mm
Height NS 35/7,5
53 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Screw thread
M4
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible max.
10 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Tightening torque, min
1.5 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Connection method
Screw connection
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
Note
Terminal point
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Stripping length
12 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141126
Height NS 32
58 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
8
2 conductors with same cross section, stranded max.
2.5 mm²
Tightening torque max
1.8 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
Insulating material group
I
Result of tight fit on support
Test passed
ECLASS 4.1
27141100
ECLASS 9.0
27141126
Nominal cross section
6 mm²
Maximum power dissipation for nominal condition
1.31 W
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 3.0
EC000902