3072637 Phoenix Contact Terminal Blocks

Product Details

• Height NS 35/15
  72.5 mm
• Nominal voltage UN
  800 V
• UNSPSC 11
  39121410
• Number of levels
  2
• Area of application
  Railway industry
• Bending test rotation speed
  10 rpm
• Nominal current IN
  30 A
• Short-time current
  0.48 kA
• Nominal cross section
  4 mm²
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test turns
  135
• Test duration per axis
  5 h
• Number of connections
  4
• Insulating material
  PA
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Color
  black
• Maximum power dissipation for nominal condition
  1.02 W (the value is multiplied when connecting multiple levels)
• Shock form
  Half-sine
Tight fit on carrier
NS 35
Result of tight fit on support
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
End cover width
2.2 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Finger protection
guaranteed
Result of thermal test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Number of shocks per direction
3
Connection method
Screw connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Width
6.2 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
10
2 conductors with same cross section, solid max.
1.5 mm²
ECLASS 4.0
27141118
ECLASS 5.1
27141100
ETIM 4.0
EC000897
Setpoint
1 N
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Length
69.9 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Short circuit stability result
Test passed
Result of temperature-rise test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Height NS 35/7,5
65 mm
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
26
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 2.0
EC000901
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 7.0
EC000897
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 4.1
27141118
ECLASS 9.0
27141120
ETIM 6.0
EC000897
Internal cylindrical gage
A4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 3.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
Tightening torque max
0.8 Nm
Rated surge voltage
8 kV
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141120
UNSPSC 20.0
39121410
Degree of pollution
3
Result of flexion and pull-out test
Test passed
ECLASS 6.0
27141100
Tractive force setpoint
80 N
Tightening torque, min
0.6 Nm
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Insulating material group
I
Open side panel
Yes
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 7.0
27141134
UNSPSC 19.0
39121410
Connection in acc. with standard
CSA
Power frequency withstand voltage setpoint
2 kV
Conductor cross section tensile test
6 mm²
Requirements, voltage drop
≤ 3.2 mV
Screw thread
M3
2 conductors with same cross section, stranded min.
0.14 mm²
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Maximum load current
36 A (with 6 mm² conductor cross section)
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Stripping length
9 mm