3069850 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Nominal cross section
  6 mm²
• ASD level
  6.12 (m/s2)2/Hz
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Insulating material
  PA
• Back of the hand protection
  guaranteed
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Tensile test result
  Test passed
• Setpoint
  5 N
• Tight fit on carrier
  NS 35
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Pitch
  8.2 mm
• Height
  56.5 mm
• Connection in acc. with standard
  IEC 60947-7-1
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Number of positions
5
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W
Note regarding shock protection
When test disconnect plug is plugged in.
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
Open side panel
No
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
69.3 mm
Conductor cross section AWG max.
8
Number of connections
10
Color
gray
Overvoltage category
III
Nominal voltage UN
400 V AC/DC
Result of power-frequency withstand voltage test
Test passed
Short-time current
1.25 kA
Number of shocks per direction
3
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
61.8 mm
Connection
1 level
Conductor cross section solid max.
10 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
73.4 mm
Length
99.7 mm
Potentials
5
Test surge voltage
5 kV
Insulating material group
I
Rated surge voltage
4 kV
Maximum load current
30 A (with 6 mm² conductor cross section)
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Note
The measuring transducer block is replaced every 100 cycles.
Stripping length
12 mm
Conductor cross section AWG min.
20
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Mounting type
NS 35/7,5
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
4 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Result of aging test
Test passed
Shock test result
Test passed
ETIM 7.0
EC000902
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ETIM 6.0
EC000902
UNSPSC 19.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Internal cylindrical gage
A5
ECLASS 7.0
27141126
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
UNSPSC 13.2
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 5.1
27141100
ECLASS 5.0
27141100
Ageing test for screwless modular terminal block temperature cycles
192
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141126
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Connection method
Push-in connection
Acceleration
30g