3069842 Phoenix Contact Terminal Blocks

Product Details

• Result of power-frequency withstand voltage test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
• Number of connections
  38
• Color
  gray
• Rated surge voltage
  4 kV
• Terminal block mounting
  0.8 Nm ... 1 Nm
• Number of levels
  1
• Insulating material
  PA
• Overvoltage category
  III
• Nominal voltage UN
  400 V AC/DC
• Note regarding shock protection
  When test disconnect plug is plugged in.
• Setpoint
  5 N
• Tensile test result
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  188.6 mm
• Flammability rating according to UL 94
  V0
Maximum load current
30 A (with 6 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Max. tightening torque of the mounting screw:
1 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ETIM 6.0
EC000902
ECLASS 6.0
27141100
Number of positions
19
Maximum power dissipation for nominal condition
1.31 W
Finger protection
guaranteed
Open side panel
No
Bending test rotation speed
10 rpm
Static insulating material application in cold
-60 °C
Permissible humidity (storage/transport)
30 % ... 70 %
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
10
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 9.0
27141126
UNSPSC 19.0
39121410
Potentials
19
Nominal cross section
6 mm²
Insulating material group
I
Test surge voltage
5 kV
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Internal cylindrical gage
A5
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
Note
The measuring transducer block is replaced every 100 cycles.
Short-time current
0.15 kA
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Mounting type
Wall mounting
ECLASS 10.0.1
27141126
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 7.0
EC000902
UNSPSC 20.0
39121410
Conductor cross section solid min.
1 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
REACh SVHC
Lead 7439-92-1
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Ageing test for screwless modular terminal block temperature cycles
192
Height
56.5 mm
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section AWG max.
8
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Plate thickness
1 mm ... 4 mm
Conductor cross section flexible min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Result of thermal test
Test passed
Test duration per axis
5 h
Length
81 mm
Stripping length
12 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Acceleration
30g
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection
1 level
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
ECLASS 5.1
27141100
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
20
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Pitch
8.2 mm
ECLASS 7.0
27141126
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²