3069835 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Number of connections
  24
• Rated surge voltage
  4 kV
• Insulating material group
  I
• Open side panel
  No
• Back of the hand protection
  guaranteed
• Potentials
  12
• Nominal voltage UN
  400 V AC/DC
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of aging test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Color
  gray
• Flammability rating according to UL 94
  V0
Maximum power dissipation for nominal condition
1.31 W
Terminal block mounting
0.8 Nm ... 1 Nm
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of voltage-drop test
Test passed
Short-time current
0.15 kA
Oscillation, broadband noise test result
Test passed
Number of positions
12
Nominal cross section
6 mm²
Test surge voltage
5 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Note regarding shock protection
When test disconnect plug is plugged in.
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Setpoint
5 N
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Note
The measuring transducer block is replaced every 100 cycles.
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Height
56.5 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test spectrum
Service life test category 2, bogie-mounted
Length
81 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
6 mm²
ECLASS 5.1
27141100
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
131.2 mm
Pitch
8.2 mm
Stripping length
12 mm
Insulating material
PA
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
ECLASS 11.0
27141126
Overvoltage category
III
Shock test result
Test passed
Min. AWG conductor cross section, flexible
20
Internal cylindrical gage
A5
Maximum load current
30 A (with 6 mm² conductor cross section)
Acceleration
30g
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
REACh SVHC
Lead 7439-92-1
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Plate thickness
1 mm ... 4 mm
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Max. tightening torque of the mounting screw:
1 Nm
ETIM 4.0
EC000897
UNSPSC 21.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141126
UNSPSC 18.0
39121410
ECLASS 5.0
27141100
UNSPSC 13.2
39121410
ETIM 7.0
EC000902
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Mounting type
Wall mounting
Min. tightening torque of the mounting screw:
0.8 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 7.0
27141126
ETIM 6.0
EC000902
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410