3069829 Phoenix Contact Terminal Blocks

Product Details

• UNSPSC 13.2
  20122006
• Number of levels
  1
• Number of connections
  12
• Maximum power dissipation for nominal condition
  1.31 W
• Overvoltage category
  III
• Note regarding shock protection
  When test disconnect plug is plugged in.
• Maximum load current
  30 A (with 6 mm² conductor cross section)
• Rated surge voltage
  4 kV
• Insulating material group
  I
• Open side panel
  No
• Power frequency withstand voltage setpoint
  1.89 kV
• Tensile test result
  Test passed
• Setpoint
  5 N
• Result of voltage-drop test
  Test passed
• Result of thermal test
  Test passed
• Result of aging test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Shock form
  Half-sine
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Number of positions
6
Potentials
6
Flammability rating according to UL 94
V0
Test surge voltage
5 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Note
The measuring transducer block is replaced every 100 cycles.
Short-time current
0.15 kA
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock duration
18 ms
Nominal cross section
6 mm²
Color
gray
Insulating material
PA
Nominal voltage UN
400 V AC/DC
Result of surge voltage test
Test passed
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Height
56.5 mm
Conductor cross section short circuit testing
4 mm²
Result of power-frequency withstand voltage test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Test duration per axis
5 h
Number of shocks per direction
3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
10 mm²
Connection method
Push-in connection
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Finger protection
guaranteed
Bending test turns
135
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
81.5 mm
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
20
Ageing test for screwless modular terminal block temperature cycles
192
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
1 mm² 10 mm²
Mounting type
Wall mounting
REACh SVHC
Lead 7439-92-1
ECLASS 7.0
27141148
ETIM 4.0
EC000902
Pitch
8.2 mm
Connection
1 level
Conductor cross section AWG min.
20
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Length
81 mm
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Internal cylindrical gage
A5
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Stripping length
12 mm
Conductor cross section AWG max.
8
Conductor cross section flexible min.
0.5 mm²
Shock test result
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141148
ECLASS 5.1
27141100
UNSPSC 19.0
20122006
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
UNSPSC 21.0
20122006
ECLASS 10.0.1
27141148
ETIM 6.0
EC002555
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 6.0
27141100
ECLASS 9.0
27141148
UNSPSC 20.0
20122006
UNSPSC 18.0
20122006
ETIM 7.0
EC002555
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)