3069827 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Maximum load current
  30 A (with 6 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Oscillation, broadband noise test result
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height
  56.5 mm
• Stripping length
  12 mm
• Connection method
  Push-in connection
• Conductor cross section flexible min.
  0.5 mm²
• Mounting type
  Wall mounting
• Number of positions
  4
• Nominal cross section
  6 mm²
• Number of connections
  8
• Maximum power dissipation for nominal condition
  1.31 W
Nominal voltage UN
400 V AC/DC
Open side panel
No
Note regarding shock protection
When test disconnect plug is plugged in.
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Note
The measuring transducer block is replaced every 100 cycles.
Setpoint
5 N
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Test duration per axis
5 h
Potentials
4
Flammability rating according to UL 94
V0
Rated surge voltage
4 kV
Color
gray
Terminal block mounting
0.8 Nm ... 1 Nm
Shock form
Half-sine
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 6.0
EC000902
Insulating material group
I
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Min. tightening torque of the mounting screw:
0.8 Nm
Overvoltage category
III
Back of the hand protection
guaranteed
Tensile test result
Test passed
Short-time current
0.15 kA
Number of shocks per direction
3
Insulating material
PA
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Height NS 35/7,5
58.5 mm
Pitch
8.2 mm
Connection
1 level
Internal cylindrical gage
A5
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
Length
81 mm
Max. tightening torque of the mounting screw:
1 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141126
ECLASS 7.0
27141126
ETIM 7.0
EC000902
Test surge voltage
5 kV
Result of surge voltage test
Test passed
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Plate thickness
1 mm ... 4 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141126
UNSPSC 18.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 21.0
39121410
UNSPSC 19.0
39121410
Width
65.6 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Max. AWG conductor cross section, flexible
10
Conductor cross section AWG max.
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section AWG min.
20
Conductor cross section flexible max.
6 mm²